Download Agilent Technologies U3606B User`s guide

U3606-90054_UG_EN.book Page 84 Friday, July 11, 2014 5:12 PM
3
DC Power Supply Operation
Constant Current Operation
Select the constant current function
4
5
The CC annunciator will turn on according to your selection.
LOAD
Adjust the constant current value
7
6
To exit the edit mode
Use the arrow keys to change the value.
• Press [
• Press [
] or [ ] to select a digit position or range.
] or [ ] to increase or decrease the value selected.
Note: If the CC annunciator is not flashing, press [Current] again. The output current
can be programmed when the output is enabled (OUT) or disabled (SBY).
84
U3606B User’s Guide