Download Sharp AL-2050CS Digital Multifunctional System Operation Service manual

(2)
Paper exit roller removal
8) Remove four screws.
9) Remove the transport unit.
1) Remove the E-ring.
2) Slide the bearing.
8
3) Remove the paper exit roller.
4) Remove the E-ring.
8
5) Remove the bearing.
4
8
9
1
5
3
2
■ Note for reassembly
Before assembly, be sure to check that the harness is passed
through the rib.
F. Drive unit
(1)
Arrange the RSPF harness to the outside of the base tray so that it
is nit pinched before assembly.
Transport unit removal
1) Disconnect four connectors.
(2)
2) Remove the harness from the clamp.
1) Remove three screws.
Drive unit removal
3) Remove the snap band.
2) Remove the drive unit.
4) Remove one screw.
5) Remove the earth wire.
1
6) Remove one screw.
7) Disconnect the RSPF harness.
1
5
4
3
1
1
2
1
1
(3)
6
1
Drive motor removal
1) Remove the gear.
2) Remove two screws.
2
3) Remove the drive motor.
7
3
2
1
■ Note for reassembly
Connect the connectors according to the arrow indication marked
on the motor mounting plate.
AL-2030/2040CS/2050CS
DISASSEMBLY AND ASSEMBLY 8 - 20