1
Download MTD 464 Operating instructions
Transcript
ARMY TM 9-6115-464-34 AIR FORCE TO 35C2-3-445-2 NAVY NAVFAC P-8-624-34 NOTES: 1. ALL SOLDERED CONNECTIONS SHALL BE IN ACCORDANCE WITH MIL-STD-454, REQUIREMENT 5. 2. INSTALL STRAPS, FIND NO. 5 AT 3.0 MAX. INTERVALS. 3. WIRE MARKING TO BE IN ACCORDANCE WITH MIL-W–5088 EXCEPT THAT LENGTH BETWEEN GROUPS OF NUMBERS SHALL NOT EXCEED 6 INCHES 4. INSTALL END SEAL PLUGS, FIND NO. 4 ON UNUSED HOLES OF CONNECTORS FIND NO. 1 AND 2. 5. INTERPRET DRAWING PER MIL-STD-100. 6. REFERENCES: a) FOR ELECTRICAL WIRING DIAGRAM, SEE DRAWING 72–2205. b)-FOR SCHEMATIC DIAGRAM, SEE DRAWING 72-2200 AND 72–2269 FOR PRECISE, 72-2295 AND 72-2277 FOR UTILITY Figure 3-89. Special Relay Assembly to Static Exciter Assembly Wiring Harness, Drawing No. 72-2220 3-197
