Download QMS 1060E Technical information

Interface Port
HP-GL
An acronym for Hewlett-Packard Graphics Language, the programming
language on which HP plotters are based. Your QMS 1725E Print System
has a resident HP-GL emulation.
IDE
An acronym for Integrated Drive Electronics. “Integrated” refers to the fact
that all of the controller electronics are on the drive itself, so no separate
adapter card or expansion slot is required. See also SCSI.
Imageable Area
The maximum area of a sheet of media capable of being printed on. It is
subject to both hardware limits (the physical page size and the margins
required by the print engine) and software constraints (the amount of
memory available for the full-page frame buffer).
Intellifont
An optional font SIMM containing 17 HP PCL 5 fonts that can be installed
inside of the QMS 1725E Print System. Adding this option increases the
number of available PCL 5 fonts for your printer from the 20 standard fonts
to 37 (equivalent to the number of fonts available on a Hewlett-Packard
LaserJet 4Si).
Interface
The place where two devices are physically connected, allowing them to
communicate.
Interface Cable
A special cable used to connect the printer to the computer so they can
communicate.
Interface Port
Your printer comes with three standard interface ports—serial, parallel, and
Ethernet—located on the back panel. An optional interface port is available
through the installation of an optional network interface card. See also
network interface card.
Glossary
G-7