Download Microscan MS-Q Imager User`s manual

Advanced Operations
Change IP Mode
Standard Mode
(Default)
Standard Mode should be applied to most applications (including DPM).
Mode 1
Mode 1 is applicable to symbols that are large and have low contrast (as
shown below).
Basic Mode
Basic Mode, while not recommended for DPM applications, can be applied to
most symbologies.
This function applies ONLY to the MS-Q Quadrus Imager.
Save changes whenever you reconfigure Imager settings.
Save
Settings
Default
to USB
COPYRIGHT © 2005 MICROSCAN SYSTEMS
Default
to PS2
Clear
all Data
Clear XML
Rules
9-9