Download Agilent Technologies 1912A Technical data

Transcript
SENSe Subsystem
10
Query Example
SENS2:AVER2?
This command queries whether averaging
is on or off for Channel B.
Error Messages
• If the command is used when a sensor other than a P- Series or E9320
power sensor is connected, error –241, “Hardware missing” occurs
•
If the command is used when an E9320 sensor is connected and set to
AVERage mode rather than NORMal mode, the error –221, “Settings
Conflict” occurs.
N1911A/1912A P-Series Power Meters Programming Guide
377