1
Download Agilent Technologies 1912A Technical data
Transcript
Calibration Factor Block Layout E4410 Series Sensors: Calibration Factor Block Layout No. Bytes Contents Data Format Data Range Units Notes A These table entries are repeated as shown for each frequency point Frequency (point ‘N’) 4 - 32 bit fixed 0 to Fhpb* (2^32) None Fhbp = Freq Hz per bit Cal factor (low power)1 2 - 2.14 0.25 to 3 None Power (in watts) is divided by this value. Cal factor (high power)1 2 - 2.14 0.25 to 3 None Power (in watts) is divided by this value. Table Size: - See note1 The table size is dependent on the number of frequency points. Table A-97 Calibration Factor Block Layout: E9300 Series Sensors E9300 Series Sensors: Calibration Factor Block Layout No. Bytes Contents Data Format Number of tables 1 2 Number of frequency points 2 - 16 bit integer Bytes per frequency point 1 - - Frequency LSB weight 2 1000 Data Range Units Notes None Number of cal factor tables. Note that the power levels and frequency points are the same for all tables. Header: N1911A/1912A P-Series Power Meters Programming Guide None - None Number of bytes in cal factor value at each frequency and power level. - Hertz Fhbp (Freq. Hz per bit). 1 KHz per bit for the cal factor: 1KHz x 2^32 = 4.3E+12 = 4300 GHz range. A-765
