1
Download SimPowerSystems User`s Guide
Transcript
DC Voltage Source Purpose 5DC Voltage Source Library Electrical Sources Description The DC Voltage Source block implements an ideal DC voltage source. The positive terminal is represented by a plus sign on one port. You can modify the voltage at any time during the simulation. Implement a DC voltage source Dialog Box and Parameters Amplitude The amplitude of the source, in volts (V). Measurements Select Voltage to measure the voltage across the terminals of the DC Voltage Source block. Place a Multimeter block in your model to display the selected measurements during the simulation. In the Available Measurements list box of the Multimeter block, the measurement is identified by a label followed by the block name: Measurement Label Voltage Usrc: 5-61
