Download Sharp R-508FS User`s guide

7.1
System Settings
7
Settings
User Paper Settings
Configure special paper settings for User Paper 1 through 6. Settings to
configure include Basic Weight and Media Adjustment.
For details on displaying this item, contact your service representative.
Erase Adjustment
Non-Image Area Erase Operation Settings
Configure Non-Image Area operation
settings.
[Auto]:
Automatically detects the background
density of the original, and selects either "Bevel" or "Rectangular" accordingly.
[Specify]:
Allows you to manually specify an
erase method and original density. As
an erase method, select "Bevel" or
"Rectangular". Specify an original
density from five levels.
Factory default
AE Level Adjustment
Standard (2)
Leading Edge Adjustment
0.0 mm
Centering
0.0 mm
Leading Edge Adjustment
(Duplex Side 2)
0.0 mm
Centering (Duplex 2nd
Side)
0.0 mm
Media Adjustment
Auto
Center Staple Position
0.0 mm
Half-Fold Position
0.0 mm
Tri-Fold Position Adjustment
0.0 mm
Punch Vertical Position Adjustment
0.0 mm
Punch Horizontal Position
Adjustment
0.0 mm
Punch Regist Loop Size
Adjustment
For Finisher FS-526
Finisher: 0.0 mm
Finisher (for Z folding): 0.0 mm
Post inserter feeder (Upper tray): 0.0 mm
Post inserter feeder (Lower tray): 0.0 mm
For Finisher FS-527: 0
Vertical Punch (Z-Fold) Position Adjustment
0.0 mm
Horizontal Punch (Z-Fold)
Position Adjustment
0.0 mm
1st Z-Fold Position Adjustment
0.0 mm
2nd Z-Fold Position Adjustment
0.0 mm
Post Inserter Tray Size Adjustment
Auto Detect
Density Adjustment
0
Image Stabilization Only
Image Stabilization Only
Image Stabilization Setting
Standard
Paper Separation Adjustment
0.0 mm
bizhub C652/C652DS/C552/C552DS/C452
7-12