Download Qlogic MPX200 User`s guide

Data Migration Service for HP StorageWorks MPX200
User’s Guide
show migration_luninfo command 5-40
show migration_params command 5-42
show migration_usage command 5-46
show perf byte command 5-48
show perf command 5-47
show properties command 5-45
show targets command 5-54
show vpgroups command 5-55
showing
LUN information 5-40
virtual port group information 5-55
single array license workaround for HP
MSA2012fc storage array 7-2
small computer system interface, See SCSI
software end user license agreements xi
software setup 2-7
solutions to problems A-1
source arrays 1-5, 1-6
source LUNs 1-3, 1-5, 1-6
source target type, setting 3-2
source+destination arrays 1-5, 1-6
source-only arrays 1-2
SSH, definition of Glossary-3
start time, serial scheduled job, viewing 5-42
start_serial_jobs command 5-22
starting
Data Migration wizard 3-7
serial scheduled data migration job in CLI
5-22
Verify Migration Job wizard 3-33
states, data migration job 1-7
status
data migration jobs, viewing in CLI 3-20
data migration jobs, viewing in GUI 3-19
port and programmed connection, setting in
CLI 5-7
stopping
data migration job in CLI 3-25, 5-17
data migration job in GUI 3-24
LUN compare job in CLI 5-27
storage area network, See SAN
storage arrays, See arrays
subnet mask, port, viewing in CLI 5-43
Index-8
support, technical xi
contact information xii
supported
configurations 2-1
storage array types 2-3
supported topologies 2-1
symbolic name, assigning to array 1-5, 3-2
system log
capturing 5-57
clearing contents of 3-28
exporting to CSV file 3-28
printing contents of 3-28
viewing in CLI 3-30
viewing in GUI 3-27
System Log dialog box 3-27, 3-28
system_capture.tar.gz file 5-57
T
target
definition of Glossary-3
ports, scanning 5-56
showing all zoned 5-54
target rescan command 5-56
target type
array, setting in CLI 5-8
source, setting in GUI 3-2
targets
rescanning ports 3-22
technical support xi
contacting xii
knowledge database xii
Telnet
definition of Glossary-4
guest account login 5-1
terms, glossary of Glossary-1
throttle, user-defined bandwidth, setting 3-4
topologies supported 2-1
total memory, viewing in CLI 5-44
troubleshooting
problems and solutions A-1
QLogic knowledge database xii
ISR654606-00 A