Download DigiDesign HD I Setup guide

96 I/O Audio Interface
Optional Legacy I/O Audio Interfaces
• Supports sample rates up to 96 kHz.
For additional input and output channels, older
Digidesign audio interfaces (or Legacy I/Os) can
be connected to the 192 I/O, 192 Digital I/O, or
96 I/O™ (the 96i I/O™ does not support Legacy
interfaces). The following supported legacy interfaces can only be used with 44.1 kHz or
48 kHz sessions:
• Supports analog and digital connections, including AES/EBU, S/PDIF, and ADAT optical:
• Analog: 8 channels, 1/4-inch TRS (balanced
or unbalanced) connectors, +4 dBu or
–10 dBV
• Digital: 2 channels, XLR (AES/EBU) connectors; 2 channels, RCA (S/PDIF) connectors
888|24 I/O Audio Interface
• Optical: 8 channels, one pair of Lightpipe
(ADAT Optical) connectors (switchable to 2
channels, S/PDIF)
• Analog: 8 channels, XLR (balanced or unbalanced) connectors, selectable between +4 dBu
or –10 dBV
• External Clock In and Out receive or send
1x Word clock (configurable to 256x for
Legacy support, see “Optional Legacy I/O
Audio Interfaces” on page 7)
• Digital: 8 channels, XLR (AES/EBU) connectors; 2 channels, RCA (S/PDIF) connectors
96i I/O Audio Interface
• Supports sample rates up to 96 kHz
• 16 discrete channels of input, and 2 channels
of output, with 4-segment LED meters on
each channel. Audio inputs and outputs include:
• 16 channels of 24-bit, 96-kHz capable analog input, with adjustable input sensitivity
• 2 channels of 24-bit, 96-kHz capable analog
output, with selectable operating level
• 2 channels of 24-bit, 96 kHz-capable digital
S/PDIF RCA input and output
• Loop Sync In and Out for connecting
Pro Tools|HD interfaces and peripherals
• External Clock In and Out receive or send 1x
Word clock
882|20 I/O Audio Interface
• Analog: 8 channels, 1/4-inch TRS (balanced or
unbalanced) connectors, selectable between
+4 dBu and –10 dBV
• Digital: 2 channels, RCA (S/PDIF) connectors
1622 I/O Audio Interface
• Analog: 16 input channels and 2 output channels, 1/4-inch TRS (balanced or unbalanced)
connectors. Inputs are selectable from +4 dBu
to –10 dBV line levels and higher in 2 dB gain
steps; outputs are selectable between +4 dBu
or –10 dBV.
• Digital: 2 channels, RCA (S/PDIF) connectors.
Digidesign 24-bit ADAT Bridge I/O
• Optical: 16 channels, a pair of Lightpipe
(ADAT) connectors.
• Analog output: 2 channels, 1/4-inch TRS (balanced) connectors, selectable between +4 dBu
and –10 dBV.
• Digital: 2 channels, XLR (AES/EBU); 2 channels RCA (S/PDIF) connectors.
Chapter 1: Welcome to Pro Tools|HD
7