Download Black Box KV120E User guide

SERVSELECTTM IP SOFTWARE INSTALLER/USER GUIDE
To restore a user database file to an appliance:
1.
Click the Tools tab in the ServSelect IP AMP.
2.
Click the Restore Appliance User Database button. The Restore Appliance
User Database dialog box appears.
3.
Click Browse and navigate to the location where you stored the saved user
database file. The filename and location appears in the File name field.
4.
Click Restore. The Enter Password dialog box appears.
5.
Enter the password you created when the user database was saved, then re-enter
the password in the Verify Password field. Click OK.
6.
The user database file is written to the appliance. Progress messages are
displayed. When complete, the new user database is used immediately; that is,
no reboot is required.
82