Download Sharp AR-650 Service manual

Transcript
16.7.3
Initial alignment control
Initial alignment
START
Original on tray?
No
Aligning sensor
non-arrival jam
Aligning sensor
OFF?
No
Timing sensor
OFF?
No
Setting of jam pulse from
start of initial alignment
to aligning sensor ON
Timing sensor
accumulation jam
Feed motor reverse
rotation started
Timing sensor OFF?
Aligning ON?
Setting of jam pulse from
start of feed motor forward
rotation to timing sensor ON
No
Jam pulse cleared
Setting of feed motor deceleration request by aligning
sensor ON interrupt (deceleration started after specified
pulse drive)
Feed motor reverse
rotation started
No
Timing sensor
ON?
Jam pulse cleared
No
Feed motor OFF?
Setting of feed motor deceleration request by aligning
sensor ON interrupt (deceleration started after specified
pulse drive)
No
Feed motor OFF?
Initial alignment END
ADF
16 - 26
No