Download Agilent Technologies 54645A Programming instructions
Transcript
Status Reporting Table 6-1 is a list of the bit definitions for the bit in the status reporting data structure. Table 6-1 Status Reporting Bit Definition Bit PON URQ CME EXE Description Power On User Request Command Error Execution Error DDE Device Dependent Error QYE RQL OPC Query Error Request Control Operation Complete OPER ESB Operation Status Register Request Service Master Summary Status Event Status Bit MAV MSG USR Message Available Message User Event Register TRG LCL FAIL COMP LTEST Trigger Local Fail Complete Limit Test MTEST Mask Test HIST Histogram WAIT TRIG Wait for Trigger RQS MSS 6-4 Indicates Power is turned on. Whether a front-panel key has been pressed. Whether the parser detected an error. Whether a parameter was out of range, or inconsistent with the current settings. Whether the device was unable to complete an operation for device dependent reasons. If the protocol for queries has been violated. Whether the device is requesting control. Whether the device has completed all pending operations. If any of the enabled conditions in the Operation Status Register have occurred. That the device is requesting service. Whether a device has a reason for requesting service. If any of the enabled conditions in the Standard Event Status Register have occurred. If there is a response in the output queue. An advisory has been displayed. If any of the enabled conditions have occurred in the User Event Register. Whether a trigger has been received. If a remote-to-local transition occurs. That the specified test has failed. That the specified test has completed. If any of the enabled conditions have occurred in the Limit Test Register. If any of the enabled conditions have occurred in the Mask Test Register. If any of the enabled conditions have occurred in the Histogram Register. Instrument is armed and ready for trigger.