Download Compaq HSG80 - StorageWorks RAID Array Controller Specifications

7–65
Specify SAVE_CONFIGURATION to store a copy of the controller configuration on
the container being initialized. A new controller can receive information from a
container containing configuration information saved with the
SAVE_CONFIGURATION switch. If you specify SAVE_CONFIGURATION for a
multi-device storageset, such as a stripeset, the complete controller configuration
information is stored on each disk drive in the storageset.
A disk drive initialized with the SAVE_CONFIGURATION switch specified has
slightly less storage space available for user data.
Specify NOSAVE_CONFIGURATION if you do not want to store a copy of the
controller configuration on a container.
See “Backing Up Your Subsystem Configuration,” page 4–26, for more information
on SAVE_CONFIGURATION.
Examples
To initialize container DISK10000 and save a copy of the controller configuration on
it, enter the following commands:
ADD DISK DISK10000 1 0 0
INITIALIZE DISK10000 SAVE_CONFIGURATION
The following example shows sample devices with the SAVE_CONFIGURATION
switch enabled:
Compaq HSG80 Array Controller ACS Version 8.4 Configuration and CLI Reference Guide