Download Marantz CDR300 User guide
Transcript
How to Record 10 Turn the SELECT control so RECORD is dis- How to record your voice or instrument (basics) played. L dB-50 -30 -22 -16 -12 -8 -4 0 TRACK R CD-RW BASS TEXT PHANTOM PROG DISP REC MODE SINGLE Then push and release the SELECT control to accept the RECORD recording mode. TREBLE MID REPEAT MENU/STORE A-B CANCEL/DELETE Stop button lit CD RECORDER CDR300 PROFESSIONAL SELECT ERASE FINALIZE The display changes to: REC POWER STANDBY PUSH ENTER L dB-50 TRACK -30 -22 -16 -12 -8 -4 0OVER -12 -8 -4 0 R CD-RW 2 4 5 INPUT ANALOG MIC/LINE PHONE/SPEAKER PHONE SELECTOR LINE OUT LEVEL AUX MIX OUT MIC LINE L INT L/R DIGITAL REC LEVEL MANUAL ALC LIMITER MIC/LINE ATT OFF ON SPEAKER OFF The REC button (11) is lit and flashing. OPEN/CLOSE ON R L+R MIC/LINE PUSH PHONES PUSH 11 Push and release REC to begin recording. LINE OUT Recordable ReWritable LEFT MIC/LINE CD PLAY / RECORD RIGHT 1 3 7 Example display while recording. 6 8 9 1 Insert a blank disc, or a recordable disc with space L dB-50 TRACK -30 -22 -16 R CD CD-RW for additional recording in the CDR drive. Push and release Stop or Play/Pause to stop recording and to set the end of your recording track and the beginning of the next track. 2 With the CDR drive at Stop. 3 Connect your microphone(s) or instrument(s) to the MIC/LINE jacks on the front of the CDR300. 4 Set the LINE MIC switches for microphone input 5 6 7 8 (MIC) or for instrument input (LINE). Turn the L and R level controls all the way up (clockwise). We suggest switching the REC LEVEL control to ALC. Set the INPUT switch to ANALOG. Set the L/R L+R switch to L/R so the left input is recorded on the left channel and the right input on the right channel. TEXT PHANTOM PROG DISP REC MODE SINGLE To play your new recording on other CD players your disc must first be finalized. See How to finalize. REPEAT MENU/STORE BASS A-B CANCEL/DELETE TREBLE MID TEXT PHANTOM PROG DISP REC MODE SINGLE REPEAT MENU/STORE A-B CANCEL/DELETE CD RECORDER CDR300 PROFESSIONAL SELECT ERASE FINALIZE REC 9 10 POWER STANDBY PUSH ENTER 11 9 Push and release REC MODE. - 21 -