Download Adaptec 131U2 - AAA RAID Controller Instruction manual

▼ ▼ ▼ ▼
Contents
1 Introduction
System Requirements 1-2
Installation Overview 1-3
2 Installing the Hardware
AAA-131U2/133U2 RAID Card Layout 2-2
Installing DIMM Memory 2-3
Installing the AAA-131U2/133U2 2-4
Connecting the LED Activity Indicator 2-5
Setting Up SCSI Devices 2-6
Check the SCSI IDs 2-6
Terminate the Ends 2-7
Additional Hints for Connecting SCSI Devices 2-8
Connecting SCSI Devices 2-9
Internal Ultra2 SCSI Connector (68-pin) 2-10
Internal Ultra SCSI Connector (50-pin) 2-13
External Ultra2 SCSI Connector (68-pin) 2-16
External SCSI Array Enclosures (Storage
Subsystems) 2-18
Configuring the AAA-131U2/133U2 2-19
3 Creating an Array With the ARRAYCONFIG U2
Utility
Creating an Array 3-2
Creating an Array with Express Setup 3-2
Creating an Array with Custom Setup 3-4
Making the Array Bootable 3-8
v