Download Mitel 50005070 Programming instructions

SX-200 ICP MX Technician’s Handbook
Re-initializing the Controller
Re-initializing the controller re-installs the system software and database.
Perform a re-initialization to recover from a failed attempt to upgrade the
system software or to return an unstable system to a known state.
You can re-initialize the controller two ways:
1. Re-install the software and a new, or previously backed-up database,
from the external CompactFlash card. For instructions, see “Installing
Software Using an External CompactFlash Card (Optional Initial
Install)” on page 34
2. Use an FTP server to download the software and database to the
controller. For instructions, see “Upgrading by FTP” on page 206.
IMPORTANT: Re-initializing a working system with a database
that has different IP addressing information than the database it is
replacing will force the IP Phones to reboot. The phones take 10 to
15 minutes to return to service once the system is re-initialized.
194