Download Real-Time Workshop®
Transcript
1 Introduction to the Real-Time Workshop data to the MAT-file variable rt_Stick_input during a run of the executable program. 5 Click the Apply button. 6 Configure the Pilot G Force and Angle of Attack Scope blocks similarly, using the variable names Pilot_G_force and Angle_of_attack. 7 Save the model. Logging Simulation Data The next step is to run the simulation and log the signal data from the Scope blocks: 1 Open the Stick Input, Pilot G Force, and Angle of Attack Scope blocks. 2 Run the model. The Scope blocks display. 3 Use the whos command to observe that the matrix variables Stick_input, Pilot_G_force, and Angle_of_attack have been saved to the workspace. 4 Plot one or more of the logged variables against simulation time. For example, plot(tout, Stick_input(:,2)) Logging Data from the Generated Program Since you have modified the model, you must rebuild and run the f14rtw executable in order to obtain a valid data file: 1-54
Related documents
Real-Time Workshop User's Guide
MATLAB REAL-TIME WORKSHOP 7 - TARGET LANGUAGE COMPILER User`s guide
Real-Time Workshop User`s Guide
MATLAB REAL-TIME WORKSHOP 7 - TARGET LANGUAGE COMPILER User`s guide
MATLAB DATABASE TOOLBOX RELEASE NOTES User`s guide
DSP Blockset User`s Guide
Motion Control of Industrial Printers
MATLAB SIGNAL PROCESSING BLOCKSET 7 User`s guide
Real-Time Workshop
Real-Time Workshop Release Notes