Download DigiDesign Focusrite d3 Specifications

chapter 4
Focusrite D3
Focusrite D3 is a high-quality dynamics processor plug-in for Pro Tools. Developed in cooperation with Focusrite, the D3 is based on the
highly acclaimed Red Range 3™ dual mono/stereo compressor & limiter designed by Rupert
Neve.
Focusrite D3 Configurations
There are two configurations of the real-time
TDM Focusrite D3 plug-in:
◆ Compressor+Limiter. This configuration allows you to use both the compressor and the
limiter at the same time. The Compressor+Limiter plug-in requires twice as much DSP as the
Compressor/Limiter.
◆ Compressor/Limiter. This configuration allows you to use either the compressor or the
limiter—but not both at the same time. The
Compressor/Limiter plug-in uses half as much
DSP as the Compressor+Limiter. It is provided so
that you can conserve DSP, since you may not
need both compression and limiting at the same
time.
Focusrite D3
The Compressor/Limiter defaults to the compressor being enabled and the limiter disabled.
Chapter 4: Focusrite D3
17