Download Cisco Engine 611 Specifications
Transcript
Chapter 3 CLI Commands (config) authentication Note Authorization privileges apply to console and Telnet connection attempts, secure FTP (SFTP) sessions, and Secure Shell (SSH, Version 1 and Version 2) sessions. We strongly recommend that you set the administrative login authentication and authorization methods in the same order. For example, configure the WAAS device to use RADIUS as the primary login method, TACACS+ as the secondary login method, Windows as the tertiary method, and the local method as the quaternary method for both administrative login authentication and authorization. In the following example, RADIUS is specified as the primary method, TACACS+ as the secondary method, Windows as the third method, and the local database as the fourth method. In this example, four login authorization (configuration) methods are specified because the fail-over server-unreachable feature is not enabled on the WAAS device. WAE(config)# WAE(config)# WAE(config)# WAE(config)# Note authentication authentication authentication authentication configuration configuration configuration configuration radius enable primary tacacs enable secondary windows-domain enable tertiary local enable quaternary If you have enabled the failover server unreachable feature on the WAAS device, make sure that you specify either TACACS+ or RADIUS as the primary scheme for authorization (configuration), and specify local as the secondary scheme for authorization (configuration). The following example shows the resulting output of the show authentication command: WAE# show authentication user Login Authentication: Console/Telnet/Ftp/SSH Session ----------------------------- -----------------------------local enabled (primary) Windows domain enabled Radius disabled Tacacs+ disabled Configuration Authentication: ----------------------------local Radius Tacacs+ Related Commands Console/Telnet/Ftp/SSH Session -----------------------------enabled (primary) disabled disabled (config) radius-server show authentication show statistics radius show statistics tacacs (config) tacacs windows-domain (config) windows-domain Cisco Wide Area Application Services Command Reference 3-264 OL-11817-01
Related documents
Cisco Engine 611 Specifications
Cisco WAE-7326-K9 Specifications
Craftsman 580.752211 Operating instructions
Craftsman 580.752190 Operating instructions
Asus M3N72-D - Motherboard - ATX Specifications
Network Integration and Interception
Asus M3N-HD Specifications
Cisco Systems 7326 User's Manual
Cisco Systems 611 User's Manual
Cisco Systems 6901 IP Phone User Manual