1
Download Extron electronics FOX 2G Tx User guide
Transcript
Command and Response Table for SIS Commands Command ASCII Command (host to unit) Response (unit to host) Additional description Specify input setting X!\ TypX!] Sets format of input video signal (X!) 0 = Auto 4 = Component 5 = S-Video 6 = Composite View current input setting \ X!] Displays current input video format. Specify color value X@C ColX@] Sets color value for video signal (X@ from 0 to 127). Increment color value +C ColX@] Increases color value by 1. Decrement color value -C ColX@] Decreases color value by 1. View current color value C X@] Displays current color value. Specify tint value X@T TinX@] Sets tint value for video signal (X@ from 0 to 127). Increment tint value +T TinX@] Increases tint value by 1. Decrement tint value -T TinX@] Decreases tint value by 1. View current tint value T X@] Displays current tint value. Specify contrast value X@^ ConX@] Sets contrast value for video signal (X@ from 0 to 127). Increment contrast value +^ ConX@] Increases contrast value by 1. Decrement contrast value -^ ConX@] Decreases contrast value by 1. View current contrast value ^ X@] Displays current contrast value. Specify brightness value X@Y BrtX@] Sets brightness value for video signal (X@ from 0 to 127). Increment brightness value +Y BrtX@] Increases brightness value by 1. Decrement brightness value -Y BrtX@] Decreases brightness value by 1. View current brightness value Y X@] Displays current brightness value. Enable blanking 1B Blk1] Blanks selected input (X#). 0 = Disables blanking or mute. 1 = Enables blanking or mute. Disable blanking 0B Blk0] Displays selected input. View current blanking status B X#] Displays current blanking status. Input video format Adjust color Adjust tint Adjust contrast Adjust brightness Video mute FOX Tx/Rx AV • Configuration 15
