Download Vertical SBX IP 320 Technical data

Call Handling
40
To activate a speed dial with security dialing:
Press the [SPEED] button + dial the Speed dial bin number which was programmed with
dialing security.
Conditions
•
Dialed phone numbers with Dialing Security are included in SMDR information.
•
This feature applies to transferred or recalled CO calls.
•
This feature applies to redial calls.
Do Not Disturb (DND)
Placing a station in DND eliminates incoming outside line ringing, intercom calls, transfers, and
paging announcements. While in DND, the station will not receive calls on CO lines. The
Attendant can override a station in DND. Stations in DND can continue to make normal
outgoing calls. Station users can individually have the ability to place their station in DND
(PGM 114). By default, DND is available at all stations.
Operation
To activate DND from a DKTU:
Press the [DND/FWD] button.
To deactivate DND from a DKTU:
Press the [DND/FWD] button again.
Conditions
•
Pressing the [DND/FWD] button during call forward or while a pre-selected message is
active, will not activate DND; call forward or the pre-selected message will be released.
•
When a Station assigned to preset call forward is in DND mode, and an incoming call is
received at the next station by ring assignment.
•
An Attendant can override a station which is in DND by using Camp-on or Intrusion.
•
An Attendant may cancel DND for one or all stations.
Admin Programming
•
Do-Not-Disturb (PGM 111)
SBX IP 320 Features & Operation Guide