Download Asus P7F7-E WS SUPERCOMPUTER Specifications

Transcript
2.
Marvell® Serial ATA 6.0 Gb/s connectors (7-pin SATA_6G_1/2 [white])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
2-38
•
These connectors are set to Standard IDE mode by default. In Standard
IDE mode, you can connect Serial ATA data hard disk drives to these
connectors.
•
You must install Windows® XP Service Pack 2 or later versions before using
Serial ATA hard disk drives.
•
When using hot-plug and NCQ, set the Marvell Controller item in the BIOS
to [AHCI Mode]. Refer to section 3.5.3 Onboard Devices Configuration
for details.
Chapter 2: Hardware information