Download RIDGID R3121 Technical data

Commissioning
2.13 Commissioning linear motors (servo)
You can select a standard motor from the list of motors. You can enter the motor data for
third-party motors manually. The number of parallel primary sections (p0306) must be
entered.
Figure 2-34
STARTER screen, linear motor selection 1FN3
2. Enter motor data
The following motor data must be entered for third-party motors:
Table 2- 20
Parameter
Motor data
Description
Comment
p0305
Rated motor current
-
p0311
Motor rated velocity
-
p0315
Motor pole pair width
-
p0316
Motor force constant
-
p0322
Motor velocity, maximum
-
p0323
Maximum motor current
-
p0338
Motor limit current
-
Commissioning Manual
134
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1