Download PRO DJ LINK Setup Guide

PRO DJ LINK
Setup Guide
Contents
How to read this manual
The instructions in this manual use the indications below.
! The names of channels and buttons indicated on the product, names of menus
in the software, etc., are indicated within square brackets ([ ]). (e.g. [MASTER]
channel, [ON/OFF], [File] menu)
! The version of rekordbox for mobile devices is referred to as “rekordbox (iOS/
Android) ”.
! The version of rekordbox for Mac/Windows is referred to as “rekordbox (Mac/
Windows)”. “rekordbox” is used to indicate the versions of rekordbox and rekordbox (iOS/Android) simultaneously, as well as when referring to rekordbox functions directly.
Before start
Purpose of this guide........................................................................................................3
General description of PRO DJ LINK...............................................................................3
To make connections........................................................................................................3
About trademarks and registered trademarks...............................................................3
Connecting the CDJ-2000nexus and DJM-2000nexus/
DJM-2000
Connecting rekordbox by wireless LAN...........................................................................4
Connecting rekordbox by wired connection/Connecting a USB device or SD
memory card......................................................................................................................7
Connecting the CDJ-2000nexus and DJM-900nexus
Connecting rekordbox by wireless LAN.........................................................................10
Connecting rekordbox by wired connection/Connecting a USB device or SD
memory card....................................................................................................................13
Connecting the CDJ-2000nexus and another mixer
Connecting rekordbox by wireless LAN.........................................................................16
Connecting rekordbox by wired connection/Connecting a USB device or SD
memory card....................................................................................................................18
Connecting the CDJ-2000/CDJ-900 and DJM-2000nexus/
DJM-2000
Connecting rekordbox by wired connection/Connecting a USB device or SD
memory card....................................................................................................................20
Connecting the CDJ-2000/CDJ-900 and DJM-900nexus
Connecting rekordbox by wired connection/Connecting a USB device or SD
memory card....................................................................................................................23
Connecting the CDJ-2000/CDJ-900 and another mixer
Connecting rekordbox by wired connection/Connecting a USB device or SD
memory card....................................................................................................................26
2
En
Before start
Before start
Purpose of this guide
This guide describes the procedures for making the connections required to use the PRO DJ LINK functions.
General description of PRO DJ LINK
The various PRO DJ LINK functions provided by Pioneer can be achieved by connecting a PRO DJ LINK-compatible Pioneer DJ player (CDJ-2000nexus/CDJ-2000/CDJ-900),
a DJ mixer (DJM-2000nexus/DJM-2000/DJM-900nexus), or a mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed by wireless LAN or by
LAN cable.
The main functions that can be achieved by PRO DJ LINK are as follows:
! Music files on a variety of mediums, such as smartphones or tablets12, computers2, USB devices or SD memory cards, can be sent by wireless signal1 or LAN/USB
cable and shared/played on up to four players3.
! The [BEAT SYNC]1 function allows the music on up to four DJ players to be played with their tempos and beats synchronized.
! The channel status (on air status and channel number) can be checked instantaneously.
! The quantize function makes it possible to apply beat effects in tempo with the music.
Even more functions are available when used in combination with other DJ players and DJ mixers supporting the PRO DJ LINK function. For details, see the respective players’ or mixers’ operating instructions.
1
Only supported on the CDJ-2000nexus. 2rekordbox must be installed. 3Music files on CDs or DVDs cannot be shared.
To make maximum use of the PRO DJ LINK function
The maximum advantages of the PRO DJ LINK function can be achieved by using music files that have been analyzed with rekordbox.
Either connect a mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed directly to the DJ player, or first transfer the music files that have
been analyzed with rekordbox to an SD memory card.
rekordbox can be downloaded free of charge from the following website:
http://rekordbox.com/
Recommended rekordbox versions
rekordbox (iOS/Android) Ver.1.1.0 or greater, rekordbox (Mac/Windows) Ver.2.0.0 or greater
! For details on connections and operations of a mobile device or computer on which rekordbox is installed, see the rekordbox (iOS/Android) user’s manual or the rekordbox
(Mac/Windows) operating instructions.
Models supporting PRO DJ LINK
CDJ-2000nexus/CDJ-2000/CDJ-900
DJM-2000nexus/DJM-2000/DJM-900nexus
To make connections
The connection procedure for using the PRO DJ LINK function differs according to the combination of devices you are using.
This manual describes the connection procedures for different combinations of PRO DJ LINK-compatible Pioneer DJ players and DJ mixers.
First check the combination of devices you are using on the table below, then connect following the description of the relevant page.
! Ex.: If you are using a CDJ-2000nexus and a DJM-2000nexus, you should follow procedure 1 . Proceed to page 1 .
Those using a DJM-2000nexus/DJM-2000
Those using a DJM-900nexus
Those using a DJ mixer other than the
DJM-2000nexus/DJM-2000/DJM-900nexus
Those using a CDJ-2000nexus
1
2
3
Those using a DJ player other than the
CDJ-2000nexus
4
5
6
Connecting by wireless LAN
! Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE802.11n or IEEE802.11g standards. Depending on the
signal conditions in the usage environment and the wireless router or access point, PRO DJ LINK connections may not operate properly.
In this case, we recommend changing the wireless router’s settings. For instructions on setting the wireless router, see the wireless router’s operating instructions.
If the problem persists after changing the wireless router’s settings, switch to wired connections.
! For instructions on making the wireless LAN connections, see the operating instructions of your computer or wireless LAN device.
About trademarks and registered trademarks
! Pioneer and rekordbox are registered trademarks of the Pioneer Corporation.
!Microsoft®, Windows® 7, Windows Vista®, Windows® XP, and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/
or other countries.
! Mac and Mac OS a trademarks of Apple Inc. registered in the United States and other countries.
!Android™ is a trademark of Google Inc.
! IOS is a trademark or registered trademark of Cisco in the United States and other countries and is used under license.
! The names of companies and products mentioned herein are the trademarks of their respective owners.
En
3
Connecting the CDJ-2000nexus and
DJM-2000nexus/DJM-2000
1
1-1
Connecting rekordbox by wireless LAN
Equipment used
!
!
!
!
!
!
CDJ-2000nexus (1 – 4 units)
Wireless router with internal switching hub or access point
Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed
DJM-2000nexus or DJM-2000
Audio cable
LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
OFF
ON
POWER
MIC
MASTER
CD
/DIGITAL PHONO USB 1/2
CD
/DIGITAL
TRIM
1
USB 3/4
LINE
2
3
TRIM
OVER
OVER
DELAY
MULTI TAP
DELAY
ECHO
REVERB
CH
SELECT
4
MIC
ROLL
A
B
CD
/DIGITAL
M
CD
/DIGITAL PHONO USB 7/8
USB 5/6
LINE
TRIM
REV
ROLL
GATE
TRANS
-
TRIM
OVER
0
OVER
EFFECT SELECT
+9
MIC
LEVEL
-
HI
+9
10
HI
7
0
-12
+12
-12
+12
LOW
TALK
OFF ON OVER
EQ/
-3
ISO
-5
+6
JET
ZIP
HPF
LPF
-7
EQ/
ISO
+6
-26/
MAX
MIN
MAX
-3
-5
1/4
1/8
1/2
3/4
1/1
2/1
4/1
-7
LEVEL/DEPTH
EQ/
ISO
+6
-26/
1
EQ/
-3
-7
-3
ISO
-5
-5
+6
-26/
-7
- 10
LOW
- 15
- 15
- 24
- 24
dB
dB
MAX
2
0
-2
- 10
LOW
- 24
AUTO
/TAP
TAP
MIN
4
-1
MID
-2
- 15
TIME
dB
7
+6
-26/
-1
MID
- 10
FILTER
0
-2
-3
+6
-26/
+6
-26/
dB
L
R
+6
-26/
FILTER
ON/OFF
BALANCE
FILTER
CUE
MIN
MAX
MIN
CUE
MIN
MIN
-5
- 24
dB
PARAMETER
MAX
10
4
2
1
+6
-26/
-1
MIN
HI
7
2
0
+9
10
HI
7
1
-7
+9
10
4
HI
- 15
- 24
FILTER
OVER
SEND/
RETURN
PHASER
- 10
LOW
- 15
+6
-26/
FILTER
MID
0
-2
- 10
LOW
SLIP
ROLL
LOW
1
-1
MID
-2
-26/
NOISE
+6
-26/
-1
MID
INST FX
CRUSH
0
EFFECT FREQUENCY
4
2
1
+6
-26/
10
7
4
2
HI
EQ
MIN
MAX
LIVE
SAMPLER
CUE
MAX
MIN
CUE
MAX
R
L
CUE
CUE
MAX
LINK
UTILITY
CUE
MONO STEREO
MIDI
WAKE UP
10
10
HEADPHONES
MONO SPLIT
8
7
Audio cable
8
7
MIX
6
6
5
5
4
4
MIXING
BOOTH MONITOR
9
9
STEREO
3
MIDI
3
REMIX
2
1
2
1
ON /OFF
0
START/STOP
0
0
SNAPSHOT
CUE
MASTER
LEVEL
LAN cable (wired)
CURVE SETTING
ON/OFF
CH EQ
CUE
-
0
A
THRU
B
A
THRU
B
A
CROSS FADER ASSIGN
B
A
THRU
PROFESSIONAL MIXER
A
CDJ-2000nexus
THRU
CROSS FADER ASSIGN
PHONES
DJM-2000
B
DJM-2000
B
ISOLATOR
EQ
CH FADER
Wireless
CROSS FADER
CDJ-2000nexus
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the
DJ players and the DJ mixer before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
4
En
Connecting the cables (LAN cable and audio cables)
Connect the LAN cable and audio cables.
CONTROL
CD DIGITAL
CH 4
POWER
PHONO
L
SIGNAL GND
R
CH 3
CD
LINE
L
LINE
CHL 3CD
CONTROL
OFF
ON
POWER
MASTER1
L
1GND
2HOT
MASTER2
L
CH 4
REC OUT
BOOTH
R
3COLD
IN
(TRS)
CH 3
CH 2
CH 1LINK
SEND
L
R
R
CDJ-2000nexus
R
SIGNAL GND
CD
COMPUTER 1
POWER
CONTROL
CD DIGITAL
R
R
CH 3
CH 1
COMPUTER 1
RETURN
L(MONO)
MIDI OUT
L(MONO)
USB
LINK
-6dB -3dB 0dB
MASTER
ATT.
CH 1
PHONO
L
CH 1
CONTROL
CD DIGITAL
O)
R
R
AC IN
DIGITAL
OUT
CONTROL
CD DIGITAL
CD DIGITAL
R
CH 2
CD
CH 4
R
CH 2
CH 4
CH 2
CDJ-2000nexus
DJM-2000
Checking the connections
Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000
Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which
the audio cables are connected are all the same number.
Connect the wireless router/access point to [COMPUTER1] or [COMPUTER2].
Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to [COMPUTER1]
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.
Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.
If the numbers are different, fix the connections.
TRIM
TRIM
OVER
+9
HI
OVER
+9
10
HI
7
+6
-26/
4
2
2
1
1
0
+6
-26/
-1
MID
-3
ISO
-5
+6
-26/
LOW
CDJ-2000nexus
-7
- 10
- 15
0
-1
MID
-2
EQ/
10
7
4
-2
EQ/
-3
ISO
-5
+6
-26/
LOW
-7
- 10
- 15
- 24
- 24
dB
dB
DJM-2000
! Set the second DJ player on in the same way.
En
5
Checking the device(s) connected by wireless connection
1 Press the [rekordbox] button.
LINK INFO
rekordbox
BROWSE
TAG LIST
INFO
UTILITY
BACK
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
QUANTIZE
TIME MODE
AUTO CUE
2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
3 Press the DJ player’s rotary selector to authorize the connection.
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
This completes checking the connections.
6
En
1-2
Connecting rekordbox by wired connection/Connecting a USB device or
SD memory card
Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000
Equipment used
!
!
!
!
!
!
!
CDJ-2000nexus (1 – 4 units)
USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.)
Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed
USB device or SD memory card on which music files analyzed with rekordbox are stored
DJM-2000nexus or DJM-2000
Audio cable
LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
OFF
ON
POWER
MIC
MASTER
CD
/DIGITAL PHONO USB 1/2
CD
/DIGITAL
TRIM
1
USB 3/4
LINE
2
3
TRIM
OVER
OVER
DELAY
MULTI TAP
DELAY
ECHO
REVERB
CH
SELECT
4
MIC
ROLL
A
B
CD
/DIGITAL
M
CD
/DIGITAL PHONO USB 7/8
USB 5/6
LINE
TRIM
REV
ROLL
GATE
TRANS
-
TRIM
OVER
0
OVER
EFFECT SELECT
+9
MIC
LEVEL
-
HI
+9
10
HI
7
0
-12
+12
-12
+12
LOW
TALK
OFF ON OVER
EQ/
-3
ISO
-5
+6
JET
ZIP
HPF
LPF
-7
EQ/
ISO
+6
-26/
PARAMETER
-3
EQ/ - 3
-5
-5
-7
1/4
1/8
1/2
3/4
MIN
1/1
MAX
2/1
4/1
-7
ISO
LEVEL/DEPTH
2
-7
1
0
EQ/
-3
ISO
-5
+6
-26/
-7
- 10
LOW
- 15
- 24
dB
MAX
4
-2
- 15
- 24
AUTO
/TAP
TAP
MIN
7
-1
MID
- 10
LOW
- 15
TIME
dB
+6
-26/
- 10
FILTER
- 24
dB
+6
-26/
dB
L
R
+6
-26/
FILTER
ON/OFF
BALANCE
FILTER
CUE
MIN
MAX
MIN
CUE
MIN
-3
-5
MAX
+6
-26/
-1
MID
-2
MIN
+6
-26/
0
-2
MAX
10
4
2
1
+6
-26/
-1
MIN
HI
7
2
0
+9
10
HI
7
1
- 24
dB
+9
10
4
HI
- 15
- 24
FILTER
OVER
SEND/
RETURN
PHASER
- 10
LOW
- 15
+6
-26/
FILTER
MID
0
-2
- 10
LOW
SLIP
ROLL
LOW
1
-1
MID
-2
-26/
NOISE
+6
-26/
-1
MID
INST FX
CRUSH
0
EFFECT FREQUENCY
4
2
1
+6
-26/
10
7
4
2
HI
EQ
MIN
MAX
LIVE
SAMPLER
CUE
MAX
MIN
CUE
MAX
R
L
CUE
CUE
MAX
LINK
UTILITY
CUE
MONO STEREO
MIDI
WAKE UP
10
10
HEADPHONES
MONO SPLIT
8
7
Audio cable
8
7
MIX
6
6
5
5
4
4
MIXING
BOOTH MONITOR
9
9
STEREO
3
MIDI
3
REMIX
2
1
2
1
ON /OFF
0
START/STOP
0
0
SNAPSHOT
CUE
MASTER
LEVEL
LAN cable (wired)
CURVE SETTING
ON/OFF
CH EQ
CUE
-
0
A
THRU
B
A
THRU
B
A
CROSS FADER ASSIGN
B
A
THRU
PROFESSIONAL MIXER
A
CDJ-2000nexus
THRU
CROSS FADER ASSIGN
PHONES
DJM-2000
B
DJM-2000
B
ISOLATOR
EQ
CH FADER
USB connections
CROSS FADER
CDJ-2000nexus
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the
DJ players and the DJ mixer before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
En
7
Connecting the cables (LAN cable and audio cables)
Connect the LAN cable and audio cables.
Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which
the audio cables are connected are all the same number.
Connect the computer to [COMPUTER1] or [COMPUTER2].
Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]
CONTROL
CD DIGITAL
CH 4
POWER
PHONO
L
SIGNAL GND
R
CH 3
CD
LINE
L
LINE
CHL 3CD
CONTROL
OFF
ON
POWER
MASTER1
L
1GND
2HOT
MASTER2
L
CH 4
REC OUT
BOOTH
(TRS)
R
3COLD
IN
CH 3
CH 2
SEND
L
R
CDJ-2000nexus
R
CH 1LINK
CH 1
PHONO
L
R
R
SIGNAL GND
CD
COMPUTER 1
POWER
CONTROL
CD DIGITAL
R
CH 3
CH 1
RETURN
L(MONO)
COMPUTER 1
MIDI OUT
L(MONO)
USB
LINK
-6dB -3dB 0dB
MASTER
ATT.
CH 1
CONTROL
CD DIGITAL
O)
R
R
AC IN
DIGITAL
OUT
CONTROL
CD DIGITAL
CD DIGITAL
R
CH 2
CD
CH 4
R
CH 2
CH 4
CH 2
CDJ-2000nexus
DJM-2000
Checking the connections
Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.
Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.
If the numbers are different, fix the connections.
TRIM
TRIM
OVER
+9
HI
OVER
+9
10
HI
7
+6
-26/
4
2
2
1
1
0
+6
-26/
-1
MID
-3
ISO
-5
+6
-26/
LOW
CDJ-2000nexus
! Set the second DJ player on in the same way.
8
En
DJM-2000
-7
- 10
- 15
0
-1
MID
-2
EQ/
10
7
4
-2
EQ/
-3
ISO
-5
+6
-26/
LOW
-7
- 10
- 15
- 24
- 24
dB
dB
Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.
Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000
— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.
— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.
— To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button.
— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
LINK INFO
rekordbox
BROWSE
TAG LIST
INFO
UTILITY
BACK
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
QUANTIZE
TIME MODE
AUTO CUE
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
This completes checking the connections.
En
9
Connecting the CDJ-2000nexus and
DJM-900nexus
2
2-1
Connecting rekordbox by wireless LAN
Equipment used
! CDJ-2000nexus (1 – 4 units)
! Wireless router with internal switching hub
! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed
!DJM-900nexus
! Audio cable
! LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
POWER
MIC
USB
MIC1
MASTER
CD/ LINE PHONO
DIGITAL
USB
1/ 2
CD/ LINE LINE
DIGITAL
USB
3 /4
CD/ LINE LINE
DIGITAL
USB
5/ 6
CD/ LINE PHONO
DIGITAL
USB
7/ 8
TRIM
TRIM
TRIM
TRIM
MIDI
START
/ STOP
ON/ OFF
LEVEL
LFO FORM
WAKE UP
UTILITY
BEAT EFFECTS
0
MIC 1
OVER
OVER
OVER
OVER
10
10
10
10
7
0
LEVEL
7
9
HI
4
2
MIC 2
12
12
12
12
6
-2
EQ
DUB
ECHO
SPACE
dB
6
COLOR
GATE/
COMP
dB
-5
-7
-10
COLOR
dB
BEAT
-15
-24
6
X- PAD
-3
ISO
6
LOW
-10
-15
-26 /
ms
-2
EQ/
-5
- 7 -26 /
-24
6
%
-1
-2
-15
-26 /
6
MID
-3
ISO
6
LOW
-10
-24
-26 /
EQ/
-5
- 7 -26 /
-15
-24
-24
-26 /
COLOR
6
L
dB
R
AUTO
/ TAP
CRUSH
FILTER
CUE
LOW
LINK
HI
LOW
CUE
HI
LOW
CUE
HI
LOW
CUE
HI
CUE
L
R
FLANGER PHASER
FILTER
ROBOT
CUE
TRANS
3
STEREO
ROLL
ECHO
REV ROLL
DELAY
4
HEADPHONES
MONO SPLIT
SLIP ROLL
SPIRAL
MONO
2
MELODIC
REVERB
CUE
FADER START
1
QUANTIZE
TAP
BALANCE
COLOR
SOUND COLOR FX
NOISE
4
MS T
GRID
BPM
0
-26 /
-1
-2
-3
6
LOW
-10
-15
dB
ISO
-5
- 7 -26 /
6
LOW
-10
EQ/
-3
ISO
-5
- 7 -26 /
TALK
OFF ON OVER
6
MID
PARAMETER
1
0
-26 /
-1
-2
EQ/
-3
LOW
6
MID
3
B
2
1
0
-26 /
-1
MID
2
A
AUTO
TAP
4
2
1
0
-26 /
7
9
HI
4
2
1
0
-1
CH SELECT
1
MIC
10
7
9
HI
4
2
1
0
HI
7
9
HI
4
OVER
STEREO
10
10
10
9
9
9
8
8
8
7
7
7
6
6
6
5
5
5
4
MIXING
4
3
2
1
0
MASTER
Audio cable
EQ CURVE
1
0
CF.A
CF.B
1
0
3
2
1
MIC
2
TIME
4
3
2
MIDI LFO
SND/ RTN
4
3
BOOTH MONITOR
ISOLATOR EQ
0
MASTER
CUE
LEVEL / DEPTH
LEVEL
A
THRU B
A
THRU B
A
THRU B
A
THRU B
MIN
0
CROSS FADER
CROSS FADER ASSIGN
LAN cable (wired)
CH FADER
MAX
ON / OFF
PHONES
A
CDJ-2000nexus
DJM-900nexus
Wireless
B
CDJ-2000nexus
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the
DJ players and the DJ mixer before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified
for [PLAYER No.] (a number from 1 to 4).
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
10
En
Connecting the cables (LAN cable and audio cables)
1 Connect the wireless router and DJM-900nexus by LAN cable.
2 Connect the LAN cable and audio cables.
Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.
Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to the DJ mixer
CONTROL
OFF
ON
RETURN
R
L (MONO)
POWER
CH 2
CD/ LINE
L
CH 3
LINE
L
LINE
LINE
CD/ LINE
SIGNAL GND
R L
R
SEND
L (MONO)
L
AC IN
1 GND
L
L
L
SIGN
SIGNAL GND
R
MASTER1
R
CH 1
PHONO CD/ LINE
L
GND
R
CD/ LINE
L
CH 2
CD/ LINE
L
2 HOT
3 COLD
R
R
MASTER2 REC OUT
L
L
TRS
R
R
BOOTH
LINK
L
R
TRS
L
MIC2
POWER
MIDI OUT
CONTROL
R
R
BOOTH
MASTER2 REC OUT
L
L
R
Connecting the CDJ-2000nexus and DJM-900nexus
CH 3
LINE
CH 4
PHONO CD/ LINE
POWER
CH2
MASTER
OUT
RR
CH4
CDJ-2000nexus DJM-900nexus
DIGITAL
CH1
R L
IN
CH3
CDJ-2000nexus
Checking the connections
Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.
Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.
If the numbers are different, fix the connections.
TRIM
TRIM
OVER
OVER
10
10
7
7
9
HI
4
2
1
0
-1
1
0
-26 /
6
-1
MID
-2
EQ/
ISO
-5
- 7 -26 /
CDJ-2000nexus
-26 /
6
MID
-2
-3
-10
9
HI
4
2
6
LOW
EQ/
-3
ISO
-5
- 7 -26 /
-10
-15
-15
-24
-24
6
LOW
DJM-900nexus
! Set the second DJ player on in the same way.
En
11
Checking the device(s) connected by wireless connection
1 Press the [rekordbox] button.
LINK INFO
rekordbox
BROWSE
TAG LIST
INFO
UTILITY
BACK
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
QUANTIZE
TIME MODE
AUTO CUE
2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
3 Press the DJ player’s rotary selector to authorize the connection.
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
This completes checking the connections.
12
En
2-2
Connecting rekordbox by wired connection/Connecting a USB device or
SD memory card
Equipment used
Connecting the CDJ-2000nexus and DJM-900nexus
! CDJ-2000nexus (1 – 4 units)
! Switching hub
! USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.)
! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed
! USB device or SD memory card on which music files analyzed with rekordbox are stored
!DJM-900nexus
! Audio cable
! LAN cables (one for each DJ player + two more)
Connections diagram (when connecting two DJ players)
POWER
MIC
USB
MIC1
MASTER
CD/ LINE PHONO
DIGITAL
USB
1/ 2
CD/ LINE LINE
DIGITAL
USB
3 /4
CD/ LINE LINE
DIGITAL
USB
5/ 6
CD/ LINE PHONO
DIGITAL
USB
7/ 8
TRIM
TRIM
TRIM
TRIM
MIDI
START
/ STOP
ON/ OFF
LEVEL
LFO FORM
WAKE UP
UTILITY
BEAT EFFECTS
0
MIC 1
OVER
OVER
OVER
OVER
10
10
10
10
7
0
LEVEL
7
9
HI
4
2
MIC 2
12
12
12
12
6
-2
EQ
DUB
ECHO
SPACE
dB
6
COLOR
GATE/
COMP
dB
-5
-7
-10
COLOR
dB
BEAT
-15
-24
6
X- PAD
-3
ISO
6
LOW
-10
-15
-26 /
ms
-2
EQ/
-5
- 7 -26 /
-24
6
%
-1
-2
-15
-26 /
6
MID
-3
ISO
6
LOW
-10
-24
-26 /
EQ/
-5
- 7 -26 /
-15
-24
-24
-26 /
COLOR
6
L
dB
R
AUTO
/ TAP
CRUSH
FILTER
CUE
LOW
LINK
HI
LOW
CUE
HI
LOW
CUE
HI
LOW
CUE
HI
CUE
L
R
FLANGER PHASER
FILTER
ROBOT
CUE
TRANS
SLIP ROLL
SPIRAL
MONO
2
MELODIC
REVERB
CUE
STEREO
3
ROLL
ECHO
REV ROLL
DELAY
FADER START
1
4
HEADPHONES
MONO SPLIT
QUANTIZE
TAP
BALANCE
COLOR
SOUND COLOR FX
NOISE
4
MS T
GRID
BPM
0
-26 /
-1
-2
-3
6
LOW
-10
-15
dB
ISO
-5
- 7 -26 /
6
LOW
-10
EQ/
-3
ISO
-5
- 7 -26 /
TALK
OFF ON OVER
6
MID
PARAMETER
1
0
-26 /
-1
-2
EQ/
-3
LOW
6
MID
3
B
2
1
0
-26 /
-1
MID
2
A
AUTO
TAP
4
2
1
0
-26 /
7
9
HI
4
2
1
0
-1
CH SELECT
1
MIC
10
7
9
HI
4
2
1
0
HI
7
9
HI
4
OVER
STEREO
10
10
10
9
9
9
8
8
8
7
7
7
6
6
6
5
5
5
4
MIXING
4
3
2
1
0
MASTER
Audio cable
EQ CURVE
1
0
CF.A
CF.B
1
0
3
2
1
MIC
2
TIME
4
3
2
MIDI LFO
SND/ RTN
4
3
BOOTH MONITOR
ISOLATOR EQ
0
MASTER
CUE
LEVEL / DEPTH
LEVEL
A
THRU B
A
THRU B
A
THRU B
A
THRU B
MIN
0
CROSS FADER
CROSS FADER ASSIGN
LAN cable (wired)
CH FADER
MAX
ON / OFF
PHONES
A
CDJ-2000nexus
DJM-900nexus
USB connections
B
CDJ-2000nexus
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the
DJ players and the DJ mixer before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified
for [PLAYER No.] (a number from 1 to 4).
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
En
13
Connecting the cables (LAN cable and audio cables)
1 Connect the switching hub and DJM-900nexus by LAN cable.
2 Connect the LAN cable and audio cables.
Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.
Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the switching hub is connected to the DJ mixer
CH 3
LINE
CH 4
PHONO CD/ LINE
POWER
CONTROL
OFF
ON
RETURN
R
L (MONO)
POWER
CH 2
CD/ LINE
L
CH 3
LINE
L
LINE
LINE
CD/ LINE
SIGNAL GND
R L
R
SEND
L (MONO)
L
AC IN
1 GND
L
L
L
SIGN
SIGNAL GND
R
MASTER1
R
CH 1
PHONO CD/ LINE
L
GND
R
CD/ LINE
L
CH 2
CD/ LINE
L
2 HOT
3 COLD
R
R
MASTER2 REC OUT
L
L
TRS
MASTER2 REC OUT
L
L
R
R
R
BOOTH
LINK
L
R
TRS
L
MIC2
POWER
MIDI OUT
CONTROL
R
R
BOOTH
CH2
MASTER
OUT
RR
CH4
CDJ-2000nexus DJM-900nexus
DIGITAL
CH1
R L
IN
CH3
CDJ-2000nexus
Checking the connections
Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.
Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.
If the numbers are different, fix the connections.
TRIM
TRIM
OVER
OVER
10
10
7
7
9
HI
4
2
1
0
-1
1
0
-26 /
6
-1
MID
-2
EQ/
ISO
-5
- 7 -26 /
CDJ-2000nexus
! Set the second DJ player on in the same way.
14
En
-26 /
6
MID
-2
-3
-10
9
HI
4
2
6
LOW
EQ/
-3
ISO
-5
- 7 -26 /
-10
-15
-15
-24
-24
DJM-900nexus
6
LOW
Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.
— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.
— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.
— To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button.
— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
LINK INFO
rekordbox
BROWSE
TAG LIST
INFO
UTILITY
BACK
Connecting the CDJ-2000nexus and DJM-900nexus
2 Press the [rekordbox] button.
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
QUANTIZE
TIME MODE
AUTO CUE
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
This completes checking the connections.
En
15
Connecting the CDJ-2000nexus and
another mixer
3
3-1
Connecting rekordbox by wireless LAN
Equipment used
!
!
!
!
!
!
CDJ-2000nexus (1 – 4 units)
Wireless router with internal switching hub
Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed
Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus)
Audio cable
LAN cables (one for each DJ player)
Connections diagram (when connecting two DJ players)
POWER
MIC
USB
MIDI
MASTER
MIC1
CD/LINE
PHONO
USB
1/2
CD/LINE
LINE
USB
3/4
CD/LINE
LINE
USB
5/6
CD/LINE
PHONO
LEVEL
USB
7/8
START
/ STOP
ON/ OFF
UTILITY
WAKE UP
TRIM
OVER
TRIM
OVER
TRIM
OVER
TRIM
OVER
BEAT EFFECTS
0
OVER
10
10
9
7
MIC 1
LEVEL
7
HI
4
0
-7
12
OFF
12
-5
-26 /
6
-7
LOW
-10
TALK
ON OVER
6
dB
CRUSH
FILTER
LOW
2
3
HI
4
6
-7
LOW
%
ms
LOW
6
-7
LOW
BEAT
-10
-15
-24
-26 /
6
L
dB
R
AUTO
/ TAP
TAP
BEAT
COLOR
HI
-5
-26 /
-15
dB
4
MST
BPM
-2
-3
ISO
-10
6
3
B
AUTO
TAP
0
-1
EQ/
-24
-26 /
BEAT
2
A
PARAMETER
1
6
MID
LOW
COLOR
HI
LOW
CUE
BALANCE
HI
CUE
L
CUE
R
CUE
FILTER FLANGER
PHASER
TRANS
REVERB
ROBOT
SPIRAL
SLIP ROLL
PITCH ECHO
MONO
STEREO
10
10
10
9
9
9
8
8
8
7
7
7
6
6
6
5
5
5
4
MIXING
4
3
STEREO
ROLL
ECHO
REV ROLL
DELAY
CF.B
1
MASTER
1
0
Audio cable
0
2
1
0
CF.A
2
TIME
3
2
1
0
SND/ RTN
4 MIC
3
BOOTH MONITOR
4
3
2
CUE
dB
CUE
HEAD PHONES
MONO SPLIT
-5
-26 /
-15
6
COLOR
CUE
FADER START
1
-7
-10
-24
-26 /
BEAT
COLOR
CUTTER
6
LOW
-15
-24
-26 /
BEAT
NOISE
-5
-26 /
-10
-15
-24
dB
SOUND COLOR FX
CH SELECT
MIC
2
0 -26 /
-2
-3
ISO
1
4
1
-1
EQ/
DJ mixer other than the
DJM-2000nexus/
DJM-2000/
DJM-900nexus
-5
LOW
7
2
6
MID
-3
ISO
HI
4
0 -26 /
-2
EQ/
9
7
1
-1
-2
-3
ISO
HI
2
6
MID
-1
EQ/
-3
EQ
0 -26 /
6
MID
-2
12
4
1
0 -26 /
-1
12
10
10
9
7
2
1
0
HI
HI
4
2
MIC 2
10
9
EQ CURVE
ISOLATOR EQ
LAN cable (wired)
MASTER
LEVEL
LEVEL / DEPTH
A
THRU
B
A
THRU
B
A
THRU
B
A
THRU
B
CH FADER
0
MIN
CROSS FADER
CROSS FADER ASSIGN
MAX
ON / OFF
Wireless
PHONES
A
B
CDJ-2000nexus
CDJ-2000nexus
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the
DJ players and the DJ mixer before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
Connecting the cables (LAN cable and audio cables)
For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
16
En
Checking the connections
Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
Checking the device(s) connected by wireless connection
1 Press the [rekordbox] button.
LINK INFO
rekordbox
BROWSE
TAG LIST
INFO
UTILITY
BACK
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
QUANTIZE
TIME MODE
AUTO CUE
2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
Connecting the CDJ-2000nexus and another mixer
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
The devices that have been recognized are indicated on the DJ player’s screen.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
3 Press the DJ player’s rotary selector to authorize the connection.
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
This completes checking the connections.
En
17
3-2
Connecting rekordbox by wired connection/Connecting a USB device or
SD memory card
Equipment used
!
!
!
!
!
!
!
!
CDJ-2000nexus (1 – 4 units)
Switching hub
USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.)
Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed
USB device or SD memory card on which music files analyzed with rekordbox are stored
Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus)
Audio cable
LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
POWER
MIC
USB
MIC1
MIDI
MASTER
CD/LINE
PHONO
USB
1/2
CD/LINE
LINE
USB
3/4
CD/LINE
LINE
USB
5/6
CD/LINE
PHONO
LEVEL
USB
7/8
START
/ STOP
ON/ OFF
UTILITY
WAKE UP
TRIM
OVER
TRIM
OVER
TRIM
OVER
TRIM
OVER
BEAT EFFECTS
0
OVER
10
10
9
7
MIC 1
HI
4
0
LEVEL
12
-7
12
OFF
12
-5
-26 /
6
-7
LOW
-10
TALK
ON OVER
-26 /
6
dB
CRUSH
FILTER
LOW
2
3
4
HI
6
-7
LOW
%
ms
LOW
-26 /
6
-7
LOW
BEAT
-10
-15
-24
-26 /
6
L
dB
R
AUTO
/ TAP
TAP
BEAT
COLOR
HI
-5
-15
dB
4
MST
BPM
-3
ISO
-10
6
3
B
-1
-2
EQ/
-24
-26 /
BEAT
2
AUTO
TAP
0
6
MID
LOW
COLOR
HI
LOW
CUE
BALANCE
HI
CUE
L
CUE
R
CUE
FILTER FLANGER
TRANS
PHASER
REVERB
ROBOT
SPIRAL
SLIP ROLL
PITCH ECHO
MONO
STEREO
10
10
10
9
9
9
8
8
8
7
7
7
6
6
6
5
5
5
4
MIXING
4
3
STEREO
ROLL
ECHO
REV ROLL
DELAY
CF.B
1
MASTER
1
0
Audio cable
0
2
1
0
CF.A
2
TIME
3
2
1
0
SND/ RTN
4 MIC
3
BOOTH MONITOR
4
3
2
CUE
dB
CUE
HEAD PHONES
MONO SPLIT
6
COLOR
CUE
FADER START
1
-26 /
-15
-24
-26 /
BEAT
COLOR
SOUND COLOR FX
-7
-5
-10
-15
-24
-26 /
BEAT
CUTTER
6
LOW
-10
-15
-24
dB
NOISE
-5
A
PARAMETER
1
0 -26 /
DJ mixer other than the
DJM-2000nexus/
DJM-2000/
DJM-900nexus
-5
LOW
1
MIC
2
1
-3
ISO
CH SELECT
4
2
-1
-2
EQ/
-3
ISO
7
HI
4
6
MID
-1
-2
EQ/
-3
ISO
0 -26 /
6
MID
-1
-2
EQ/
HI
1
0 -26 /
6
MID
-3
EQ
9
7
2
1
0 -26 /
-1
-2
12
4
2
1
0
HI
10
10
9
7
HI
4
2
MIC 2
10
9
7
EQ CURVE
ISOLATOR EQ
LAN cable (wired)
MASTER
LEVEL
LEVEL / DEPTH
A
THRU
B
A
THRU
B
A
THRU
B
A
THRU
B
CH FADER
0
MIN
CROSS FADER
CROSS FADER ASSIGN
MAX
ON / OFF
USB connections
PHONES
A
B
CDJ-2000nexus
CDJ-2000nexus
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the
DJ players and the DJ mixer before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
Connecting the cables (LAN cable and audio cables)
For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
18
En
Checking the connections
Checking the DJ player’s link established by LAN connection
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.
— To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button.
— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.
— To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button.
— To use an SD memory card: Press the [SD] button.
! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed.
2 Press the [rekordbox] button.
LINK INFO
rekordbox
BROWSE
TAG LIST
INFO
UTILITY
BACK
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
QUANTIZE
Connecting the CDJ-2000nexus and another mixer
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
TIME MODE
AUTO CUE
! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button.
3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
The devices that have been recognized are indicated on the DJ player’s screen.
Ex.: When connecting a computer (Mac/Windows)
The connection completed screen appears.
rekordbox (iOS/Android)
rekordbox (Mac/Windows)
This completes checking the connections.
En
19
Connecting the CDJ-2000/CDJ-900 and
DJM-2000nexus/DJM-2000
4
Connecting rekordbox by wired connection/Connecting a USB device or
SD memory card
Equipment used
!
!
!
!
!
!
CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units)
Computer (Mac/Windows) on which rekordbox is installed
USB device or SD memory card on which music files analyzed with rekordbox are stored
DJM-2000nexus or DJM-2000
Audio cable
LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
UTILITY
BROWSE
TAG LIST
INFO
BACK
TAG TRACK
/ REMOVE
UTILITY
MENU
OFF
ON
POWER
LINK
UNLOCK
MIC
DISC EJECT
CD
/DIGITAL
TRIM
SD
+9
MIC
LEVEL
AUTO
CUE
-
TOUCH / BRAKE
HI
OVER
-12
+12
RELOOP/EXIT
NEEDLE SEARCH
LOOP
DELETE MEMORY
CUE / LOOP
CALL
-12
+12
TALK
OFF ON OVER
RELEASE / START
OUT ADJUST
MULTI TAP
DELAY
EQ/
-3
ISO
-5
+6
ECHO
REVERB
MIC
B
CD
/DIGITAL
M
GATE
TRANS
4-BEAT LOOP
LOOP CUTTER
LIGHT
HEAVY
VINYL
CDJ
NOISE
JET
ZIP
HPF
CRUSH
LPF
-7
EQ/
10
16
WIDE
PARAMETER
MAX
MIN
MAX
MIN
MAX
+6
-26/
-7
3/4
1/1
2/1
- 10
LOW
- 24
EQ/
ISO
-7
-26/
- 15
TIME
LEVEL/DEPTH
dB
MAX
EQ/
-3
-26/
MAX
MIN
RELOOP /EXIT
LOOP
NEEDLE SEARCH
CUE / LOOP
CALL
DELETE MEMORY
RELEASE / START
-7
- 10
IN ADJUST
OUT ADJUST
4-BEAT LOOP
- 15
JOG ADJUST
- 24
dB
L
R
REC / CALL
LOOP CUTTER
LIGHT
+6
-26/
FILTER
HEAVY
VINYL
CDJ
DIRECTION
MIN
MAX
MAX
MIN
JOG
MODE
BALANCE
FILTER
CUE
MIN
OUT
-5
LOW
dB
+6
-26/
ON/OFF
IN / CUE
-3
ISO
+6
- 24
dB
TAP
MIN
TOUCH / BRAKE
-2
- 15
- 24
AUTO
/TAP
+6
FILTER
VINYL
SPEED ADJUST
-1
MID
-5
-7
AUTO
CUE
1
- 10
LOW
TIME
MODE
HOT CUE
2
0
-2
+6
DISC
4
+6
-26/
-1
MID
- 10
- 15
- 24
-26/
4/1
0
-2
-3
1/2
LOCK
DISC EJECT
SD
7
4
2
-5
1/4
1/8
STANDBY
UNLOCK
SD
10
HI
7
1
+6
-26/
-1
MIN
-5
- 15
+6
-26/
0
OFF
ON
POWER
0
+9
10
HI
7
2
-3
ISO
+9
10
4
HI
TAG TRACK
/ REMOVE
OVER
OVER
SEND/
RETURN
PHASER
1
-2
dB
JOG
MODE
TEMPO
6
FWD
FILTER
MID
0
-1
MID
FILTER
DIRECTION
SLIP
ROLL
LOW
1
BACK
MENU
USB
-
TRIM
OVER
INFO
USB
STOP
CD
/DIGITAL PHONO USB 7/8
USB 5/6
LINE
TRIM
REV
ROLL
ROLL
A
EFFECT FREQUENCY
4
- 10
LOW
10
2
+6
-26/
-2
INST FX
JOG ADJUST
0
-1
MID
-26/
REC / CALL
DELAY
CH
SELECT
4
7
1
+6
-26/
LOW
OUT
+9
HI
4
2
HI
EQ
10
7
0
VINYL
SPEED ADJUST
IN ADJUST
3
EFFECT SELECT
DISC
SD
IN / CUE
2
TRIM
OVER
TIME
MODE
1
USB 3/4
LINE
TAG LIST
LINK
MASTER
CD
/DIGITAL PHONO USB 1/2
LOCK
USB
HOT CUE
BROWSE
OFF
ON
POWER
STANDBY
USB
STOP
MAX
R
L
TEMPO
6
FWD
REV
10
16
WIDE
REV
CUE
MASTER
TEMPO
MIN
TRACK SEARCH
LIVE
SAMPLER
CUE
CUE
CUE
CUE
MASTER
TEMPO
MAX
LINK
UTILITY
CUE
10
10
HEADPHONES
MONO SPLIT
MONO STEREO
MIDI
TRACK SEARCH
WAKE UP
8
7
8
7
MIX
SEARCH
6
6
5
5
4
4
MIXING
BOOTH MONITOR
9
9
STEREO
SEARCH
3
MIDI
3
REMIX
2
1
2
1
ON /OFF
0
START/STOP
Audio cable
0
0
SNAPSHOT
CUE
0
CUE
REV
CH EQ
A
THRU
B
A
THRU
B
A
CROSS FADER ASSIGN
B
A
THRU
PROFESSIONAL MIXER
A
TEMPO
THRU
CROSS FADER ASSIGN
PHONES
CDJ-2000
CUE
TEMPO
RESET
CUE
0
FWD
MULTI PLAYER
0
CURVE SETTING
ON/OFF
TEMPO
RESET
PLAY / PAUSE
MASTER
LEVEL
B
DJM-2000
B
ISOLATOR
EQ
CH FADER
PLAY / PAUSE
REV
FWD
CROSS FADER
TEMPO
CDJ-2000
MULTI PLAYER
DJM-2000
LAN cable (wired)
CDJ-2000
CDJ-2000
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s)
and the DJ mixer(s) before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO].
[PLAYER No.] setting screen
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
20
En
Connecting the cables (LAN cable and audio cables)
Connect the LAN cable and audio cables.
Connect in such a way that the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected
are the same number.
Connect the computer to [COMPUTER1] or [COMPUTER2].
Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1]
PHONO
L
SIGNAL GND
R
CH 3
CD
LINE
CD
L
LINE
CHL 3CD
POWER
AUDIO OUT
R
CONTROL
L
OFF
ON
DIGITAL
OUT
POWER
R
R
MASTER1
L
1GND
2HOT
MASTER2
L
CH 4
REC OUT
BOOTH
R
3COLD
(TRS)
CH 3
R
CH 1LINK
CH 2
R
R
SIGNAL GND
CD
COMPUTER 1
L(MONO)
R
AUDIO OUT
CD DIGITAL
R
CONTROL
L
DIGITAL
OUT
R
CH 3
CH 1
RETURN
COMPUTER 1
MIDI OUT
L(MONO)
LINK
USB
USB
LINK
-6dB -3dB 0dB
CH 4
R
MASTER
ATT.
CDJ-2000
CH 1
PHONO
L
CONTROL
CD DIGITAL
SEND
L
CH 1
POWER
IN
O)
USB
AC IN
DIGITAL
OUT
CONTROL
CD DIGITAL
CD DIGITAL
R
LINK
CH 2
CH 2
CH 4
CH 2
CDJ-2000
DJM-2000
Checking the connections
Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
Checking the DJ player’s link established by LAN connection (for the CDJ-900)
Connecting the CDJ-2000/CDJ-900 and DJM-2000nexus/DJM-2000
CONTROL
CD DIGITAL
CH 4
Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is
displayed for [LINK STATUS].
LINK OK
UTILITY
PLAYER No.
LINK STATUS
AUTO STANDBY
MIDI CHANNEL
LINK NG
UTILITY
PLAYER No.
LINK STATUS
AUTO STANDBY
MIDI CHANNEL
2
CONNECTED
ON
–
2
NOT CONNECTED
ON
–
! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.
! Set the second DJ player on in the same way.
Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.
Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.
If the numbers are different, fix the connections.
CD
/DIGITAL PHONO USB 1/2
CD
/DIGITAL
TRIM
USB 3/4
LINE
TRIM
OVER
+9
HI
OVER
+9
10
HI
7
+6
-26/
4
2
2
1
1
0
+6
-26/
-1
MID
-3
ISO
CDJ-2000
-5
+6
-26/
-7
-2
EQ/
-3
ISO
-5
+6
-26/
- 10
LOW
- 15
- 24
- 24
dB
FILTER
CDJ-900
-7
- 10
LOW
- 15
+6
-26/
0
-1
MID
-2
EQ/
10
7
4
dB
+6
-26/
FILTER
DJM-2000
! Set the second DJ player on in the same way.
En
21
Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.
— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.
— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.
— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.
— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
UTILITY
BROWSE
TAG LIST
INFO
BACK
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
TIME
MODE
AUTO
CUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
55.481 mm
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
This completes checking the connections.
22
En
Connecting the CDJ-2000/CDJ-900 and
DJM-900nexus
5
Connecting rekordbox by wired connection/Connecting a USB device or
SD memory card
Equipment used
Connecting the CDJ-2000/CDJ-900 and DJM-900nexus
! CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units)
! Switching hub
! Computer (Mac/Windows) on which rekordbox is installed
! USB device or SD memory card on which music files analyzed with rekordbox are stored
!DJM-900nexus
! Audio cable
! LAN cables (one for each DJ player + two more)
Connections diagram (when connecting two DJ players)
UTILITY
BROWSE
TAG LIST
INFO
BACK
POWER
TAG TRACK
/ REMOVE
MENU
MIC
OFF
ON
POWER
LINK
UNLOCK
USB
CD/ LINE LINE
DIGITAL
USB
3 /4
CD/ LINE LINE
DIGITAL
USB
5/ 6
CD/ LINE PHONO
DIGITAL
USB
7/ 8
TRIM
LEVEL
12
LOOP
NEEDLE SEARCH
CUE / LOOP
CALL
12
EQ
- 7 -26 /
12
TALK
OFF ON OVER
IN ADJUST
OUT ADJUST
4-BEAT LOOP
JOG ADJUST
LOOP CUTTER
LIGHT
HEAVY
VINYL
CDJ
JOG
MODE
DUB
ECHO
SPACE
ms
TEMPO
6
FWD
10
16
NOISE
TOUCH / BRAKE
FILTER
BEAT
-15
-15
-15
-24
-24
-24
-24
dB
6
-26 /
COLOR
dB
6
-26 /
COLOR
dB
6
-26 /
COLOR
LINK
HI
LOW
HI
LOW
6
L
dB
LOW
HI
CUE
CUE
CUE
CUE
L
AUTO
/ TAP
10
9
STEREO
LOOP CUTTER
HEAVY
8
7
REV ROLL
MIDI LFO
SND/ RTN
4
MIC
2
16
WIDE
TRACK SEARCH
CF.A
CF.B
1
MASTER
4
3
0
3
2
2
1
1
1
0
0
0
SEARCH
TIME
5
4
3
10
MASTER
TEMPO
ROLL
ECHO
6
5
4
2
EQ CURVE
ISOLATOR EQ
Audio cable
MASTER
LEVEL / DEPTH
LEVEL
0
A
THRU B
A
THRU B
A
THRU B
A
THRU B
0
CH FADER
CUE
TEMPO
RESET
MIN
0
CROSS FADER
CROSS FADER ASSIGN
FWD
A
TEMPO
RESET
MAX
ON / OFF
PLAY / PAUSE
PHONES
REV
FWD
B
TEMPO
TEMPO
CDJ-2000
CDJ-2000
JOG
MODE
TEMPO
6
REV
7
6
5
BOOTH MONITOR
9
8
7
6
MULTI PLAYER
VINYL
FWD
SLIP ROLL
3
10
9
8
STEREO
MIXING
CUE
REV
REC / CALL
MELODIC
DELAY
HEADPHONES
CUE
RELEASE / START
JOG ADJUST
CDJ
4
SEARCH
PLAY / PAUSE
DELETE MEMORY
LIGHT
TRANS
SPIRAL
3
CUE / LOOP
CALL
DIRECTION
REVERB
10
MONO SPLIT
QUANTIZE
TAP
FLANGER PHASER
FILTER
ROBOT
CUE
MONO
2
OUT ADJUST
4-BEAT LOOP
R
R
FADER START
1
IN ADJUST
BALANCE
COLOR
HI
CUE
MASTER
TEMPO
TRACK SEARCH
NEEDLE SEARCH
CUE
LOW
WIDE
REV
RELOOP /EXIT
LOOP
-10
-15
-26 /
OUT
-7
6
LOW
-24
GATE/
COMP
CRUSH
AUTO
CUE
VINYL
SPEED ADJUST
IN / CUE
-5
SOUND COLOR FX
DIRECTION
TIME
MODE
HOT CUE
-3
ISO
-10
DISC
SD
%
X- PAD
-15
dB
REC / CALL
EQ/
- 7 -26 /
6
4
MS T
GRID
BPM
-1
-2
-5
LOW
-10
3
B
0
6
MID
-3
ISO
- 7 -26 /
6
LOW
-10
EQ/
-5
2
A
PARAMETER
1
-26 /
-1
-2
-3
ISO
- 7 -26 /
6
LOW
-10
EQ/
-5
1
AUTO
TAP
4
2
0
6
MID
MIC
7
9
1
-26 /
-1
-2
-3
ISO
-5
12
RELEASE / START
EQ/
-3
LOW
DELETE MEMORY
6
MID
HI
4
2
0
-26 /
-1
-2
LOCK
CH SELECT
10
7
1
0
6
MID
9
2
1
-26 /
HI
4
2
0
-2
OFF
ON
STANDBY
UNLOCK
DISC EJECT
OVER
10
7
9
HI
4
1
-1
HI
RELOOP/EXIT
TAG TRACK
/ REMOVE
SD
OVER
10
7
9
HI
4
2
0
TOUCH / BRAKE
OUT
BACK
MENU
POWER
TRIM
OVER
10
7
0
MIC 2
VINYL
SPEED ADJUST
TRIM
OVER
10
MIC 1
SD
AUTO
CUE
INFO
USB
0
TRIM
OVER
DISC
TAG LIST
LINK
USB
STOP
WAKE UP
BEAT EFFECTS
DISC EJECT
IN / CUE
BROWSE
LFO FORM
UTILITY
SD
TIME
MODE
MIDI
START
/ STOP
ON/ OFF
LEVEL
LOCK
USB
HOT CUE
UTILITY
MASTER
CD/ LINE PHONO
DIGITAL
USB
1/ 2
MIC1
STANDBY
USB
STOP
MULTI PLAYER
DJM-900nexus
LAN cable (wired)
CDJ-2000
CDJ-2000
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s)
and the DJ mixer(s) before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified
for [PLAYER No.] (a number from 1 to 4).
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
En
23
Connecting the cables (LAN cable and audio cables)
1 Connect the switching hub and DJM-900nexus by LAN cable.
2 Connect the LAN cable and audio cables.
Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number.
Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to the DJ mixer
CH 3
LINE
CH 4
PHONO CD/ LINE
POWER
AUDIO OUT
R
CONTROL
L
OFF
ON
DIGITAL
OUT
R
POWER
L
RETURN
L (MONO)
LINE
CH 3
CH 2
CD/ LINE
LINE
L
CD/ LINE
L
CD/ LINE
SIGNAL GND
CH 1
PHONO CD/ LINE
L
GND
L
SIGN
SIGNAL GND
MIC2
MIDI OUT
POWER
AUDIO OUT
R
R
R L
CH 2
CD/ LINE
L
LINE
LINK
R
USB
R
MASTER1
R
SEND
L (MONO)
L
L
AC IN
CDJ-2000
1 GND
R
R
BOOTH
MASTER2 REC OUT
L
L
TRS
R
MASTER2 REC OUT
L
L
L
R
R
2 HOT
3 COLD
R
R
L
BOOTH
LINK
TRS
L
CONTROL
L
DIGITAL
OUT
R
CH2
MASTER
OUT
RR
CH4
DIGITAL
CH1
R L
LINK
USB
IN
CH3
DJM-900nexus
CDJ-2000
Checking the connections
Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
Checking the DJ player’s link established by LAN connection (for the CDJ-900)
Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is
displayed for [LINK STATUS].
LINK OK
UTILITY
PLAYER No.
LINK STATUS
AUTO STANDBY
MIDI CHANNEL
LINK NG
UTILITY
PLAYER No.
LINK STATUS
AUTO STANDBY
MIDI CHANNEL
2
CONNECTED
ON
–
2
NOT CONNECTED
ON
–
! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.
! Set the second DJ player on in the same way.
Checking that the LAN cable and audio cables are synchronized
Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly.
Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator.
If the numbers are different, fix the connections.
CD
/DIGITAL PHONO USB 1/2
CD
/DIGITAL
TRIM
USB 3/4
LINE
TRIM
OVER
+9
HI
OVER
+9
10
HI
7
+6
-26/
4
2
2
1
1
0
+6
-26/
-1
MID
EQ/
-3
ISO
-5
+6
-26/
-7
-2
EQ/
-3
ISO
-5
+6
-26/
- 10
LOW
- 15
- 24
- 24
dB
FILTER
CDJ-900
24
En
DJM-2000
-7
- 10
LOW
- 15
+6
-26/
0
-1
MID
-2
CDJ-2000
10
7
4
dB
+6
-26/
FILTER
Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.
— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.
— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.
— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.
— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
UTILITY
BROWSE
TAG LIST
INFO
BACK
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
Connecting the CDJ-2000/CDJ-900 and DJM-900nexus
TIME
MODE
AUTO
CUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
55.481 mm
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
This completes checking the connections.
En
25
Connecting the CDJ-2000/CDJ-900 and
another mixer
6
Connecting rekordbox by wired connection/Connecting a USB device or
SD memory card
Equipment used
!
!
!
!
!
!
!
CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units)
Switching hub
Computer (Mac/Windows) on which rekordbox is installed
USB device or SD memory card on which music files analyzed with rekordbox are stored
Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus)
Audio cable
LAN cables (one for each DJ player + one more)
Connections diagram (when connecting two DJ players)
UTILITY
BROWSE
TAG LIST
INFO
BACK
TAG TRACK
/ REMOVE
UTILITY
MENU
STANDBY
UNLOCK
BROWSE
POWER
OFF
ON
POWER
LINK
USB
STOP
MIC
LOCK
USB
MIC1
USB
PHONO
USB
1/2
CD/LINE
LINE
USB
3/4
CD/LINE
LINE
USB
5/6
CD/LINE
PHONO
LEVEL
USB
7/8
TRIM
OVER
TRIM
OVER
TRIM
OVER
TRIM
10
9
7
LEVEL
OVER
MID
-1
IN / CUE
OUT
RELOOP/EXIT
LOOP
NEEDLE SEARCH
CUE / LOOP
CALL
DELETE MEMORY
12
RELEASE / START
12
OUT ADJUST
4-BEAT LOOP
JOG ADJUST
-7
12
OFF
REC / CALL
12
-5
-26 /
6
-7
LOW
-10
LIGHT
HEAVY
VINYL
CDJ
TALK
ON OVER
-15
JOG
MODE
dB
-26 /
FWD
10
16
WIDE
CUTTER
SOUND COLOR FX
CRUSH
FILTER
-15
6
dB
MASTER
TEMPO
TRACK SEARCH
2
3
HI
4
MONO SPLIT
-15
CUE
PLAY / PAUSE
dB
LOW
-26 /
-7
-15
6
dB
RELOOP /EXIT
NEEDLE SEARCH
CUE / LOOP
CALL
DELETE MEMORY
OUT ADJUST
RELEASE / START
4-BEAT LOOP
JOG ADJUST
-15
-24
-26 /
6
L
dB
R
REC / CALL
AUTO
/ TAP
LOOP CUTTER
TAP
LIGHT
HEAVY
BEAT
LOW
COLOR
HI
LOW
CUE
HI
CUE
10
10
10
9
9
9
8
8
8
7
7
7
6
6
6
5
5
5
4
4
4
3
3
3
2
2
2
1
1
1
0
0
0
VINYL
CDJ
JOG
MODE
BALANCE
L
DIRECTION
CUE
TEMPO
6
FWD
10
16
WIDE
R
CUE
STEREO
REV
FILTER FLANGER
TRANS
PHASER
REVERB
MASTER
TEMPO
ROBOT
SPIRAL
SLIP ROLL
ROLL
ECHO
TRACK SEARCH
REV ROLL
DELAY
SND/ RTN
4 MIC
3
BOOTH MONITOR
2
CF.A
CF.B
1
MASTER
SEARCH
TIME
0
EQ CURVE
Audio cable
ISOLATOR EQ
0
MASTER
LEVEL
LEVEL / DEPTH
A
FWD
IN ADJUST
BEAT
-10
COLOR
HI
6
LOW
-24
-26 /
BEAT
TOUCH / BRAKE
OUT
LOOP
PITCH ECHO
STEREO
CUE
TEMPO
RESET
REV
6
VINYL
SPEED ADJUST
IN / CUE
-5
MONO
MIXING
0
-7
AUTO
CUE
ms
-3
ISO
-10
CUE
HEAD PHONES
SEARCH
6
LOW
COLOR
CUE
FADER START
1
-26 /
-24
-26 /
BEAT
LOW
REV
-7
-5
HOT CUE
-2
EQ/
-3
ISO
-10
COLOR
TEMPO
6
6
LOW
-24
-26 /
BEAT
NOISE
DIRECTION
-5
4
MST
BPM
-1
-2
EQ/
-3
ISO
-10
-24
LOOP CUTTER
EQ/
-3
ISO
3
B
%
DJ mixer other than the
DJM-2000nexus/
DJM-2000/
DJM-900nexus
-5
LOW
IN ADJUST
EQ/
-3
EQ
MID
-1
-2
2
AUTO
TAP
0
6
A
PARAMETER
1
0 -26 /
MID
-1
-2
DISC
MIC
2
1
TIME
MODE
CH SELECT
1
4
2
6
SD
7
HI
4
0 -26 /
MID
-1
-2
9
7
1
6
LOCK
DISC EJECT
10
10
2
0 -26 /
6
HI
4
1
0 -26 /
9
7
2
1
HI
10
HI
4
2
0
9
7
HI
4
0
MIC 2
OFF
ON
STANDBY
UNLOCK
SD
OVER
10
MIC 1
VINYL
SPEED ADJUST
TOUCH / BRAKE
TAG TRACK
/ REMOVE
USB
BEAT EFFECTS
0
DISC
AUTO
CUE
BACK
MENU
USB
STOP
UTILITY
WAKE UP
SD
TIME
MODE
INFO
POWER
START
/ STOP
ON/ OFF
DISC EJECT
SD
HOT CUE
TAG LIST
LINK
MIDI
MASTER
CD/LINE
THRU
B
A
THRU
B
A
THRU
B
A
THRU
B
CH FADER
0
MIN
CROSS FADER
CROSS FADER ASSIGN
MAX
CUE
PLAY / PAUSE
TEMPO
RESET
REV
FWD
ON / OFF
PHONES
TEMPO
MULTI PLAYER
A
TEMPO
B
CDJ-2000
CDJ-2000
MULTI PLAYER
LAN cable (wired)
CDJ-2000
CDJ-2000
Connection procedure
Creating the [PLAYER No.] setting
1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s)
and the DJ mixer(s) before connecting the LAN cables.
! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established.
2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified
for [PLAYER No.] (a number from 1 to 4).
[PLAYER No.] setting screen (ex.: when set to [PLAYER 2])
! Set the second DJ player on in the same way.
![PLAYER No.] is set to [AUTO] upon shipment from the factory.
! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously.
Connecting the cables (LAN cable and audio cables)
For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams.
26
En
Checking the connections
Checking the DJ player’s link established by LAN connection (for the CDJ-2000)
Check that the player number indicated on the DJ player’s screen is lit in white.
LINK OK
LINK NG
! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the
connection procedure.
! Set the second DJ player on in the same way.
Checking the DJ player’s link established by LAN connection (for the CDJ-900)
LINK OK
Connecting the CDJ-2000/CDJ-900 and another mixer
Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is
displayed for [LINK STATUS].
LINK NG
UTILITY
PLAYER No.
LINK STATUS
AUTO STANDBY
MIDI CHANNEL
UTILITY
PLAYER No.
LINK STATUS
AUTO STANDBY
MIDI CHANNEL
2
CONNECTED
ON
–
2
NOT CONNECTED
ON
–
! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure.
! Set the second DJ player on in the same way.
Checking the connected device(s)
1 Press one of the medium select buttons to check the connection with the respective device.
— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.
— To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button.
— To use a USB device connected by wire to the USB "A terminal": Press the [USB] button.
— To use an SD memory card: Press the [SD] button.
! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).
2 Press the [LINK] button.
UTILITY
BROWSE
TAG LIST
INFO
BACK
TAG TRACK
/ REMOVE
MENU
LINK
USB
SD
DISC
TIME
MODE
AUTO
CUE
3 Click the [LINK] button to connect.
rekordbox (Mac/Windows)
En
27
The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen.
55.481 mm
Ex.: When connecting a computer (Mac/Windows)
rekordbox (Mac/Windows)
This completes checking the connections.
© 2012 PIONEER CORPORATION.
All rights reserved.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
<DRI1124-B>
28
En