Download PRO DJ LINK Setup Guide
Transcript
PRO DJ LINK Setup Guide Contents How to read this manual The instructions in this manual use the indications below. ! The names of channels and buttons indicated on the product, names of menus in the software, etc., are indicated within square brackets ([ ]). (e.g. [MASTER] channel, [ON/OFF], [File] menu) ! The version of rekordbox for mobile devices is referred to as “rekordbox (iOS/ Android) ”. ! The version of rekordbox for Mac/Windows is referred to as “rekordbox (Mac/ Windows)”. “rekordbox” is used to indicate the versions of rekordbox and rekordbox (iOS/Android) simultaneously, as well as when referring to rekordbox functions directly. Before start Purpose of this guide........................................................................................................3 General description of PRO DJ LINK...............................................................................3 To make connections........................................................................................................3 About trademarks and registered trademarks...............................................................3 Connecting the CDJ-2000nexus and DJM-2000nexus/ DJM-2000 Connecting rekordbox by wireless LAN...........................................................................4 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card......................................................................................................................7 Connecting the CDJ-2000nexus and DJM-900nexus Connecting rekordbox by wireless LAN.........................................................................10 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card....................................................................................................................13 Connecting the CDJ-2000nexus and another mixer Connecting rekordbox by wireless LAN.........................................................................16 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card....................................................................................................................18 Connecting the CDJ-2000/CDJ-900 and DJM-2000nexus/ DJM-2000 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card....................................................................................................................20 Connecting the CDJ-2000/CDJ-900 and DJM-900nexus Connecting rekordbox by wired connection/Connecting a USB device or SD memory card....................................................................................................................23 Connecting the CDJ-2000/CDJ-900 and another mixer Connecting rekordbox by wired connection/Connecting a USB device or SD memory card....................................................................................................................26 2 En Before start Before start Purpose of this guide This guide describes the procedures for making the connections required to use the PRO DJ LINK functions. General description of PRO DJ LINK The various PRO DJ LINK functions provided by Pioneer can be achieved by connecting a PRO DJ LINK-compatible Pioneer DJ player (CDJ-2000nexus/CDJ-2000/CDJ-900), a DJ mixer (DJM-2000nexus/DJM-2000/DJM-900nexus), or a mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed by wireless LAN or by LAN cable. The main functions that can be achieved by PRO DJ LINK are as follows: ! Music files on a variety of mediums, such as smartphones or tablets12, computers2, USB devices or SD memory cards, can be sent by wireless signal1 or LAN/USB cable and shared/played on up to four players3. ! The [BEAT SYNC]1 function allows the music on up to four DJ players to be played with their tempos and beats synchronized. ! The channel status (on air status and channel number) can be checked instantaneously. ! The quantize function makes it possible to apply beat effects in tempo with the music. Even more functions are available when used in combination with other DJ players and DJ mixers supporting the PRO DJ LINK function. For details, see the respective players’ or mixers’ operating instructions. 1 Only supported on the CDJ-2000nexus. 2rekordbox must be installed. 3Music files on CDs or DVDs cannot be shared. To make maximum use of the PRO DJ LINK function The maximum advantages of the PRO DJ LINK function can be achieved by using music files that have been analyzed with rekordbox. Either connect a mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed directly to the DJ player, or first transfer the music files that have been analyzed with rekordbox to an SD memory card. rekordbox can be downloaded free of charge from the following website: http://rekordbox.com/ Recommended rekordbox versions rekordbox (iOS/Android) Ver.1.1.0 or greater, rekordbox (Mac/Windows) Ver.2.0.0 or greater ! For details on connections and operations of a mobile device or computer on which rekordbox is installed, see the rekordbox (iOS/Android) user’s manual or the rekordbox (Mac/Windows) operating instructions. Models supporting PRO DJ LINK CDJ-2000nexus/CDJ-2000/CDJ-900 DJM-2000nexus/DJM-2000/DJM-900nexus To make connections The connection procedure for using the PRO DJ LINK function differs according to the combination of devices you are using. This manual describes the connection procedures for different combinations of PRO DJ LINK-compatible Pioneer DJ players and DJ mixers. First check the combination of devices you are using on the table below, then connect following the description of the relevant page. ! Ex.: If you are using a CDJ-2000nexus and a DJM-2000nexus, you should follow procedure 1 . Proceed to page 1 . Those using a DJM-2000nexus/DJM-2000 Those using a DJM-900nexus Those using a DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus Those using a CDJ-2000nexus 1 2 3 Those using a DJ player other than the CDJ-2000nexus 4 5 6 Connecting by wireless LAN ! Use a wireless router (commercially available) and access point (commercially available) conforming to either IEEE802.11n or IEEE802.11g standards. Depending on the signal conditions in the usage environment and the wireless router or access point, PRO DJ LINK connections may not operate properly. In this case, we recommend changing the wireless router’s settings. For instructions on setting the wireless router, see the wireless router’s operating instructions. If the problem persists after changing the wireless router’s settings, switch to wired connections. ! For instructions on making the wireless LAN connections, see the operating instructions of your computer or wireless LAN device. About trademarks and registered trademarks ! Pioneer and rekordbox are registered trademarks of the Pioneer Corporation. !Microsoft®, Windows® 7, Windows Vista®, Windows® XP, and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/ or other countries. ! Mac and Mac OS a trademarks of Apple Inc. registered in the United States and other countries. !Android™ is a trademark of Google Inc. ! IOS is a trademark or registered trademark of Cisco in the United States and other countries and is used under license. ! The names of companies and products mentioned herein are the trademarks of their respective owners. En 3 Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000 1 1-1 Connecting rekordbox by wireless LAN Equipment used ! ! ! ! ! ! CDJ-2000nexus (1 – 4 units) Wireless router with internal switching hub or access point Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed DJM-2000nexus or DJM-2000 Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) OFF ON POWER MIC MASTER CD /DIGITAL PHONO USB 1/2 CD /DIGITAL TRIM 1 USB 3/4 LINE 2 3 TRIM OVER OVER DELAY MULTI TAP DELAY ECHO REVERB CH SELECT 4 MIC ROLL A B CD /DIGITAL M CD /DIGITAL PHONO USB 7/8 USB 5/6 LINE TRIM REV ROLL GATE TRANS - TRIM OVER 0 OVER EFFECT SELECT +9 MIC LEVEL - HI +9 10 HI 7 0 -12 +12 -12 +12 LOW TALK OFF ON OVER EQ/ -3 ISO -5 +6 JET ZIP HPF LPF -7 EQ/ ISO +6 -26/ MAX MIN MAX -3 -5 1/4 1/8 1/2 3/4 1/1 2/1 4/1 -7 LEVEL/DEPTH EQ/ ISO +6 -26/ 1 EQ/ -3 -7 -3 ISO -5 -5 +6 -26/ -7 - 10 LOW - 15 - 15 - 24 - 24 dB dB MAX 2 0 -2 - 10 LOW - 24 AUTO /TAP TAP MIN 4 -1 MID -2 - 15 TIME dB 7 +6 -26/ -1 MID - 10 FILTER 0 -2 -3 +6 -26/ +6 -26/ dB L R +6 -26/ FILTER ON/OFF BALANCE FILTER CUE MIN MAX MIN CUE MIN MIN -5 - 24 dB PARAMETER MAX 10 4 2 1 +6 -26/ -1 MIN HI 7 2 0 +9 10 HI 7 1 -7 +9 10 4 HI - 15 - 24 FILTER OVER SEND/ RETURN PHASER - 10 LOW - 15 +6 -26/ FILTER MID 0 -2 - 10 LOW SLIP ROLL LOW 1 -1 MID -2 -26/ NOISE +6 -26/ -1 MID INST FX CRUSH 0 EFFECT FREQUENCY 4 2 1 +6 -26/ 10 7 4 2 HI EQ MIN MAX LIVE SAMPLER CUE MAX MIN CUE MAX R L CUE CUE MAX LINK UTILITY CUE MONO STEREO MIDI WAKE UP 10 10 HEADPHONES MONO SPLIT 8 7 Audio cable 8 7 MIX 6 6 5 5 4 4 MIXING BOOTH MONITOR 9 9 STEREO 3 MIDI 3 REMIX 2 1 2 1 ON /OFF 0 START/STOP 0 0 SNAPSHOT CUE MASTER LEVEL LAN cable (wired) CURVE SETTING ON/OFF CH EQ CUE - 0 A THRU B A THRU B A CROSS FADER ASSIGN B A THRU PROFESSIONAL MIXER A CDJ-2000nexus THRU CROSS FADER ASSIGN PHONES DJM-2000 B DJM-2000 B ISOLATOR EQ CH FADER Wireless CROSS FADER CDJ-2000nexus Connection procedure Creating the [PLAYER No.] setting 1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO]. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. 4 En Connecting the cables (LAN cable and audio cables) Connect the LAN cable and audio cables. CONTROL CD DIGITAL CH 4 POWER PHONO L SIGNAL GND R CH 3 CD LINE L LINE CHL 3CD CONTROL OFF ON POWER MASTER1 L 1GND 2HOT MASTER2 L CH 4 REC OUT BOOTH R 3COLD IN (TRS) CH 3 CH 2 CH 1LINK SEND L R R CDJ-2000nexus R SIGNAL GND CD COMPUTER 1 POWER CONTROL CD DIGITAL R R CH 3 CH 1 COMPUTER 1 RETURN L(MONO) MIDI OUT L(MONO) USB LINK -6dB -3dB 0dB MASTER ATT. CH 1 PHONO L CH 1 CONTROL CD DIGITAL O) R R AC IN DIGITAL OUT CONTROL CD DIGITAL CD DIGITAL R CH 2 CD CH 4 R CH 2 CH 4 CH 2 CDJ-2000nexus DJM-2000 Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000 Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number. Connect the wireless router/access point to [COMPUTER1] or [COMPUTER2]. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to [COMPUTER1] ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If the numbers are different, fix the connections. TRIM TRIM OVER +9 HI OVER +9 10 HI 7 +6 -26/ 4 2 2 1 1 0 +6 -26/ -1 MID -3 ISO -5 +6 -26/ LOW CDJ-2000nexus -7 - 10 - 15 0 -1 MID -2 EQ/ 10 7 4 -2 EQ/ -3 ISO -5 +6 -26/ LOW -7 - 10 - 15 - 24 - 24 dB dB DJM-2000 ! Set the second DJ player on in the same way. En 5 Checking the device(s) connected by wireless connection 1 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE 2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player’s screen. rekordbox (iOS/Android) rekordbox (Mac/Windows) 3 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. 6 En 1-2 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000 Equipment used ! ! ! ! ! ! ! CDJ-2000nexus (1 – 4 units) USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.) Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed USB device or SD memory card on which music files analyzed with rekordbox are stored DJM-2000nexus or DJM-2000 Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) OFF ON POWER MIC MASTER CD /DIGITAL PHONO USB 1/2 CD /DIGITAL TRIM 1 USB 3/4 LINE 2 3 TRIM OVER OVER DELAY MULTI TAP DELAY ECHO REVERB CH SELECT 4 MIC ROLL A B CD /DIGITAL M CD /DIGITAL PHONO USB 7/8 USB 5/6 LINE TRIM REV ROLL GATE TRANS - TRIM OVER 0 OVER EFFECT SELECT +9 MIC LEVEL - HI +9 10 HI 7 0 -12 +12 -12 +12 LOW TALK OFF ON OVER EQ/ -3 ISO -5 +6 JET ZIP HPF LPF -7 EQ/ ISO +6 -26/ PARAMETER -3 EQ/ - 3 -5 -5 -7 1/4 1/8 1/2 3/4 MIN 1/1 MAX 2/1 4/1 -7 ISO LEVEL/DEPTH 2 -7 1 0 EQ/ -3 ISO -5 +6 -26/ -7 - 10 LOW - 15 - 24 dB MAX 4 -2 - 15 - 24 AUTO /TAP TAP MIN 7 -1 MID - 10 LOW - 15 TIME dB +6 -26/ - 10 FILTER - 24 dB +6 -26/ dB L R +6 -26/ FILTER ON/OFF BALANCE FILTER CUE MIN MAX MIN CUE MIN -3 -5 MAX +6 -26/ -1 MID -2 MIN +6 -26/ 0 -2 MAX 10 4 2 1 +6 -26/ -1 MIN HI 7 2 0 +9 10 HI 7 1 - 24 dB +9 10 4 HI - 15 - 24 FILTER OVER SEND/ RETURN PHASER - 10 LOW - 15 +6 -26/ FILTER MID 0 -2 - 10 LOW SLIP ROLL LOW 1 -1 MID -2 -26/ NOISE +6 -26/ -1 MID INST FX CRUSH 0 EFFECT FREQUENCY 4 2 1 +6 -26/ 10 7 4 2 HI EQ MIN MAX LIVE SAMPLER CUE MAX MIN CUE MAX R L CUE CUE MAX LINK UTILITY CUE MONO STEREO MIDI WAKE UP 10 10 HEADPHONES MONO SPLIT 8 7 Audio cable 8 7 MIX 6 6 5 5 4 4 MIXING BOOTH MONITOR 9 9 STEREO 3 MIDI 3 REMIX 2 1 2 1 ON /OFF 0 START/STOP 0 0 SNAPSHOT CUE MASTER LEVEL LAN cable (wired) CURVE SETTING ON/OFF CH EQ CUE - 0 A THRU B A THRU B A CROSS FADER ASSIGN B A THRU PROFESSIONAL MIXER A CDJ-2000nexus THRU CROSS FADER ASSIGN PHONES DJM-2000 B DJM-2000 B ISOLATOR EQ CH FADER USB connections CROSS FADER CDJ-2000nexus Connection procedure Creating the [PLAYER No.] setting 1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO]. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. En 7 Connecting the cables (LAN cable and audio cables) Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s [PLAYER No.], the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are all the same number. Connect the computer to [COMPUTER1] or [COMPUTER2]. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1] CONTROL CD DIGITAL CH 4 POWER PHONO L SIGNAL GND R CH 3 CD LINE L LINE CHL 3CD CONTROL OFF ON POWER MASTER1 L 1GND 2HOT MASTER2 L CH 4 REC OUT BOOTH (TRS) R 3COLD IN CH 3 CH 2 SEND L R CDJ-2000nexus R CH 1LINK CH 1 PHONO L R R SIGNAL GND CD COMPUTER 1 POWER CONTROL CD DIGITAL R CH 3 CH 1 RETURN L(MONO) COMPUTER 1 MIDI OUT L(MONO) USB LINK -6dB -3dB 0dB MASTER ATT. CH 1 CONTROL CD DIGITAL O) R R AC IN DIGITAL OUT CONTROL CD DIGITAL CD DIGITAL R CH 2 CD CH 4 R CH 2 CH 4 CH 2 CDJ-2000nexus DJM-2000 Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If the numbers are different, fix the connections. TRIM TRIM OVER +9 HI OVER +9 10 HI 7 +6 -26/ 4 2 2 1 1 0 +6 -26/ -1 MID -3 ISO -5 +6 -26/ LOW CDJ-2000nexus ! Set the second DJ player on in the same way. 8 En DJM-2000 -7 - 10 - 15 0 -1 MID -2 EQ/ 10 7 4 -2 EQ/ -3 ISO -5 +6 -26/ LOW -7 - 10 - 15 - 24 - 24 dB dB Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. Connecting the CDJ-2000nexus and DJM-2000nexus/DJM-2000 — To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button. — To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button. — To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed. 2 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE ! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. En 9 Connecting the CDJ-2000nexus and DJM-900nexus 2 2-1 Connecting rekordbox by wireless LAN Equipment used ! CDJ-2000nexus (1 – 4 units) ! Wireless router with internal switching hub ! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed !DJM-900nexus ! Audio cable ! LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) POWER MIC USB MIC1 MASTER CD/ LINE PHONO DIGITAL USB 1/ 2 CD/ LINE LINE DIGITAL USB 3 /4 CD/ LINE LINE DIGITAL USB 5/ 6 CD/ LINE PHONO DIGITAL USB 7/ 8 TRIM TRIM TRIM TRIM MIDI START / STOP ON/ OFF LEVEL LFO FORM WAKE UP UTILITY BEAT EFFECTS 0 MIC 1 OVER OVER OVER OVER 10 10 10 10 7 0 LEVEL 7 9 HI 4 2 MIC 2 12 12 12 12 6 -2 EQ DUB ECHO SPACE dB 6 COLOR GATE/ COMP dB -5 -7 -10 COLOR dB BEAT -15 -24 6 X- PAD -3 ISO 6 LOW -10 -15 -26 / ms -2 EQ/ -5 - 7 -26 / -24 6 % -1 -2 -15 -26 / 6 MID -3 ISO 6 LOW -10 -24 -26 / EQ/ -5 - 7 -26 / -15 -24 -24 -26 / COLOR 6 L dB R AUTO / TAP CRUSH FILTER CUE LOW LINK HI LOW CUE HI LOW CUE HI LOW CUE HI CUE L R FLANGER PHASER FILTER ROBOT CUE TRANS 3 STEREO ROLL ECHO REV ROLL DELAY 4 HEADPHONES MONO SPLIT SLIP ROLL SPIRAL MONO 2 MELODIC REVERB CUE FADER START 1 QUANTIZE TAP BALANCE COLOR SOUND COLOR FX NOISE 4 MS T GRID BPM 0 -26 / -1 -2 -3 6 LOW -10 -15 dB ISO -5 - 7 -26 / 6 LOW -10 EQ/ -3 ISO -5 - 7 -26 / TALK OFF ON OVER 6 MID PARAMETER 1 0 -26 / -1 -2 EQ/ -3 LOW 6 MID 3 B 2 1 0 -26 / -1 MID 2 A AUTO TAP 4 2 1 0 -26 / 7 9 HI 4 2 1 0 -1 CH SELECT 1 MIC 10 7 9 HI 4 2 1 0 HI 7 9 HI 4 OVER STEREO 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 MIXING 4 3 2 1 0 MASTER Audio cable EQ CURVE 1 0 CF.A CF.B 1 0 3 2 1 MIC 2 TIME 4 3 2 MIDI LFO SND/ RTN 4 3 BOOTH MONITOR ISOLATOR EQ 0 MASTER CUE LEVEL / DEPTH LEVEL A THRU B A THRU B A THRU B A THRU B MIN 0 CROSS FADER CROSS FADER ASSIGN LAN cable (wired) CH FADER MAX ON / OFF PHONES A CDJ-2000nexus DJM-900nexus Wireless B CDJ-2000nexus Connection procedure Creating the [PLAYER No.] setting 1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified for [PLAYER No.] (a number from 1 to 4). [PLAYER No.] setting screen (ex.: when set to [PLAYER 2]) ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously. 10 En Connecting the cables (LAN cable and audio cables) 1 Connect the wireless router and DJM-900nexus by LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the wireless router is connected to the DJ mixer CONTROL OFF ON RETURN R L (MONO) POWER CH 2 CD/ LINE L CH 3 LINE L LINE LINE CD/ LINE SIGNAL GND R L R SEND L (MONO) L AC IN 1 GND L L L SIGN SIGNAL GND R MASTER1 R CH 1 PHONO CD/ LINE L GND R CD/ LINE L CH 2 CD/ LINE L 2 HOT 3 COLD R R MASTER2 REC OUT L L TRS R R BOOTH LINK L R TRS L MIC2 POWER MIDI OUT CONTROL R R BOOTH MASTER2 REC OUT L L R Connecting the CDJ-2000nexus and DJM-900nexus CH 3 LINE CH 4 PHONO CD/ LINE POWER CH2 MASTER OUT RR CH4 CDJ-2000nexus DJM-900nexus DIGITAL CH1 R L IN CH3 CDJ-2000nexus Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If the numbers are different, fix the connections. TRIM TRIM OVER OVER 10 10 7 7 9 HI 4 2 1 0 -1 1 0 -26 / 6 -1 MID -2 EQ/ ISO -5 - 7 -26 / CDJ-2000nexus -26 / 6 MID -2 -3 -10 9 HI 4 2 6 LOW EQ/ -3 ISO -5 - 7 -26 / -10 -15 -15 -24 -24 6 LOW DJM-900nexus ! Set the second DJ player on in the same way. En 11 Checking the device(s) connected by wireless connection 1 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE 2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. The devices that have been recognized are indicated on the DJ player’s screen. rekordbox (iOS/Android) rekordbox (Mac/Windows) 3 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. 12 En 2-2 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card Equipment used Connecting the CDJ-2000nexus and DJM-900nexus ! CDJ-2000nexus (1 – 4 units) ! Switching hub ! USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.) ! Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed ! USB device or SD memory card on which music files analyzed with rekordbox are stored !DJM-900nexus ! Audio cable ! LAN cables (one for each DJ player + two more) Connections diagram (when connecting two DJ players) POWER MIC USB MIC1 MASTER CD/ LINE PHONO DIGITAL USB 1/ 2 CD/ LINE LINE DIGITAL USB 3 /4 CD/ LINE LINE DIGITAL USB 5/ 6 CD/ LINE PHONO DIGITAL USB 7/ 8 TRIM TRIM TRIM TRIM MIDI START / STOP ON/ OFF LEVEL LFO FORM WAKE UP UTILITY BEAT EFFECTS 0 MIC 1 OVER OVER OVER OVER 10 10 10 10 7 0 LEVEL 7 9 HI 4 2 MIC 2 12 12 12 12 6 -2 EQ DUB ECHO SPACE dB 6 COLOR GATE/ COMP dB -5 -7 -10 COLOR dB BEAT -15 -24 6 X- PAD -3 ISO 6 LOW -10 -15 -26 / ms -2 EQ/ -5 - 7 -26 / -24 6 % -1 -2 -15 -26 / 6 MID -3 ISO 6 LOW -10 -24 -26 / EQ/ -5 - 7 -26 / -15 -24 -24 -26 / COLOR 6 L dB R AUTO / TAP CRUSH FILTER CUE LOW LINK HI LOW CUE HI LOW CUE HI LOW CUE HI CUE L R FLANGER PHASER FILTER ROBOT CUE TRANS SLIP ROLL SPIRAL MONO 2 MELODIC REVERB CUE STEREO 3 ROLL ECHO REV ROLL DELAY FADER START 1 4 HEADPHONES MONO SPLIT QUANTIZE TAP BALANCE COLOR SOUND COLOR FX NOISE 4 MS T GRID BPM 0 -26 / -1 -2 -3 6 LOW -10 -15 dB ISO -5 - 7 -26 / 6 LOW -10 EQ/ -3 ISO -5 - 7 -26 / TALK OFF ON OVER 6 MID PARAMETER 1 0 -26 / -1 -2 EQ/ -3 LOW 6 MID 3 B 2 1 0 -26 / -1 MID 2 A AUTO TAP 4 2 1 0 -26 / 7 9 HI 4 2 1 0 -1 CH SELECT 1 MIC 10 7 9 HI 4 2 1 0 HI 7 9 HI 4 OVER STEREO 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 MIXING 4 3 2 1 0 MASTER Audio cable EQ CURVE 1 0 CF.A CF.B 1 0 3 2 1 MIC 2 TIME 4 3 2 MIDI LFO SND/ RTN 4 3 BOOTH MONITOR ISOLATOR EQ 0 MASTER CUE LEVEL / DEPTH LEVEL A THRU B A THRU B A THRU B A THRU B MIN 0 CROSS FADER CROSS FADER ASSIGN LAN cable (wired) CH FADER MAX ON / OFF PHONES A CDJ-2000nexus DJM-900nexus USB connections B CDJ-2000nexus Connection procedure Creating the [PLAYER No.] setting 1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified for [PLAYER No.] (a number from 1 to 4). [PLAYER No.] setting screen (ex.: when set to [PLAYER 2]) ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously. En 13 Connecting the cables (LAN cable and audio cables) 1 Connect the switching hub and DJM-900nexus by LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the switching hub is connected to the DJ mixer CH 3 LINE CH 4 PHONO CD/ LINE POWER CONTROL OFF ON RETURN R L (MONO) POWER CH 2 CD/ LINE L CH 3 LINE L LINE LINE CD/ LINE SIGNAL GND R L R SEND L (MONO) L AC IN 1 GND L L L SIGN SIGNAL GND R MASTER1 R CH 1 PHONO CD/ LINE L GND R CD/ LINE L CH 2 CD/ LINE L 2 HOT 3 COLD R R MASTER2 REC OUT L L TRS MASTER2 REC OUT L L R R R BOOTH LINK L R TRS L MIC2 POWER MIDI OUT CONTROL R R BOOTH CH2 MASTER OUT RR CH4 CDJ-2000nexus DJM-900nexus DIGITAL CH1 R L IN CH3 CDJ-2000nexus Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If the numbers are different, fix the connections. TRIM TRIM OVER OVER 10 10 7 7 9 HI 4 2 1 0 -1 1 0 -26 / 6 -1 MID -2 EQ/ ISO -5 - 7 -26 / CDJ-2000nexus ! Set the second DJ player on in the same way. 14 En -26 / 6 MID -2 -3 -10 9 HI 4 2 6 LOW EQ/ -3 ISO -5 - 7 -26 / -10 -15 -15 -24 -24 DJM-900nexus 6 LOW Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button. — To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button. — To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK Connecting the CDJ-2000nexus and DJM-900nexus 2 Press the [rekordbox] button. TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE ! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. En 15 Connecting the CDJ-2000nexus and another mixer 3 3-1 Connecting rekordbox by wireless LAN Equipment used ! ! ! ! ! ! CDJ-2000nexus (1 – 4 units) Wireless router with internal switching hub Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus) Audio cable LAN cables (one for each DJ player) Connections diagram (when connecting two DJ players) POWER MIC USB MIDI MASTER MIC1 CD/LINE PHONO USB 1/2 CD/LINE LINE USB 3/4 CD/LINE LINE USB 5/6 CD/LINE PHONO LEVEL USB 7/8 START / STOP ON/ OFF UTILITY WAKE UP TRIM OVER TRIM OVER TRIM OVER TRIM OVER BEAT EFFECTS 0 OVER 10 10 9 7 MIC 1 LEVEL 7 HI 4 0 -7 12 OFF 12 -5 -26 / 6 -7 LOW -10 TALK ON OVER 6 dB CRUSH FILTER LOW 2 3 HI 4 6 -7 LOW % ms LOW 6 -7 LOW BEAT -10 -15 -24 -26 / 6 L dB R AUTO / TAP TAP BEAT COLOR HI -5 -26 / -15 dB 4 MST BPM -2 -3 ISO -10 6 3 B AUTO TAP 0 -1 EQ/ -24 -26 / BEAT 2 A PARAMETER 1 6 MID LOW COLOR HI LOW CUE BALANCE HI CUE L CUE R CUE FILTER FLANGER PHASER TRANS REVERB ROBOT SPIRAL SLIP ROLL PITCH ECHO MONO STEREO 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 MIXING 4 3 STEREO ROLL ECHO REV ROLL DELAY CF.B 1 MASTER 1 0 Audio cable 0 2 1 0 CF.A 2 TIME 3 2 1 0 SND/ RTN 4 MIC 3 BOOTH MONITOR 4 3 2 CUE dB CUE HEAD PHONES MONO SPLIT -5 -26 / -15 6 COLOR CUE FADER START 1 -7 -10 -24 -26 / BEAT COLOR CUTTER 6 LOW -15 -24 -26 / BEAT NOISE -5 -26 / -10 -15 -24 dB SOUND COLOR FX CH SELECT MIC 2 0 -26 / -2 -3 ISO 1 4 1 -1 EQ/ DJ mixer other than the DJM-2000nexus/ DJM-2000/ DJM-900nexus -5 LOW 7 2 6 MID -3 ISO HI 4 0 -26 / -2 EQ/ 9 7 1 -1 -2 -3 ISO HI 2 6 MID -1 EQ/ -3 EQ 0 -26 / 6 MID -2 12 4 1 0 -26 / -1 12 10 10 9 7 2 1 0 HI HI 4 2 MIC 2 10 9 EQ CURVE ISOLATOR EQ LAN cable (wired) MASTER LEVEL LEVEL / DEPTH A THRU B A THRU B A THRU B A THRU B CH FADER 0 MIN CROSS FADER CROSS FADER ASSIGN MAX ON / OFF Wireless PHONES A B CDJ-2000nexus CDJ-2000nexus Connection procedure Creating the [PLAYER No.] setting 1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO]. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. Connecting the cables (LAN cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams. 16 En Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG Checking the device(s) connected by wireless connection 1 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE TIME MODE AUTO CUE 2 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. Connecting the CDJ-2000nexus and another mixer ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. The devices that have been recognized are indicated on the DJ player’s screen. rekordbox (iOS/Android) rekordbox (Mac/Windows) 3 Press the DJ player’s rotary selector to authorize the connection. The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. Ex.: When connecting a mobile device (iOS/Android) and a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. En 17 3-2 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card Equipment used ! ! ! ! ! ! ! ! CDJ-2000nexus (1 – 4 units) Switching hub USB cable (for the iPod cable, use the iPod cable included with the CDJ-2000nexus.) Mobile device (iOS/Android) or computer (Mac/Windows) on which rekordbox is installed USB device or SD memory card on which music files analyzed with rekordbox are stored Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus) Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) POWER MIC USB MIC1 MIDI MASTER CD/LINE PHONO USB 1/2 CD/LINE LINE USB 3/4 CD/LINE LINE USB 5/6 CD/LINE PHONO LEVEL USB 7/8 START / STOP ON/ OFF UTILITY WAKE UP TRIM OVER TRIM OVER TRIM OVER TRIM OVER BEAT EFFECTS 0 OVER 10 10 9 7 MIC 1 HI 4 0 LEVEL 12 -7 12 OFF 12 -5 -26 / 6 -7 LOW -10 TALK ON OVER -26 / 6 dB CRUSH FILTER LOW 2 3 4 HI 6 -7 LOW % ms LOW -26 / 6 -7 LOW BEAT -10 -15 -24 -26 / 6 L dB R AUTO / TAP TAP BEAT COLOR HI -5 -15 dB 4 MST BPM -3 ISO -10 6 3 B -1 -2 EQ/ -24 -26 / BEAT 2 AUTO TAP 0 6 MID LOW COLOR HI LOW CUE BALANCE HI CUE L CUE R CUE FILTER FLANGER TRANS PHASER REVERB ROBOT SPIRAL SLIP ROLL PITCH ECHO MONO STEREO 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 MIXING 4 3 STEREO ROLL ECHO REV ROLL DELAY CF.B 1 MASTER 1 0 Audio cable 0 2 1 0 CF.A 2 TIME 3 2 1 0 SND/ RTN 4 MIC 3 BOOTH MONITOR 4 3 2 CUE dB CUE HEAD PHONES MONO SPLIT 6 COLOR CUE FADER START 1 -26 / -15 -24 -26 / BEAT COLOR SOUND COLOR FX -7 -5 -10 -15 -24 -26 / BEAT CUTTER 6 LOW -10 -15 -24 dB NOISE -5 A PARAMETER 1 0 -26 / DJ mixer other than the DJM-2000nexus/ DJM-2000/ DJM-900nexus -5 LOW 1 MIC 2 1 -3 ISO CH SELECT 4 2 -1 -2 EQ/ -3 ISO 7 HI 4 6 MID -1 -2 EQ/ -3 ISO 0 -26 / 6 MID -1 -2 EQ/ HI 1 0 -26 / 6 MID -3 EQ 9 7 2 1 0 -26 / -1 -2 12 4 2 1 0 HI 10 10 9 7 HI 4 2 MIC 2 10 9 7 EQ CURVE ISOLATOR EQ LAN cable (wired) MASTER LEVEL LEVEL / DEPTH A THRU B A THRU B A THRU B A THRU B CH FADER 0 MIN CROSS FADER CROSS FADER ASSIGN MAX ON / OFF USB connections PHONES A B CDJ-2000nexus CDJ-2000nexus Connection procedure Creating the [PLAYER No.] setting 1 Check that no mobile devices, USB devices or SD memory cards are connected to the DJ players, then turn on the power of the DJ players and the DJ mixer before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a mobile device, USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO]. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. Connecting the cables (LAN cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams. 18 En Checking the connections Checking the DJ player’s link established by LAN connection Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [rekordbox] button. — To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button. — To use a mobile device (iOS/Android) or USB device connected by wire to the USB "A terminal": Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes examples for when the [rekordbox] button is pressed and when the [USB] button is pressed. 2 Press the [rekordbox] button. LINK INFO rekordbox BROWSE TAG LIST INFO UTILITY BACK TAG TRACK / REMOVE MENU LINK USB SD DISC QUANTIZE Connecting the CDJ-2000nexus and another mixer ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. TIME MODE AUTO CUE ! To use a mobile device (iOS/Android) connected by wire: Press the [USB] button. 3 Tap the [LOAD] icon, or click the [LINK] button to establish the link connection. rekordbox (iOS/Android) rekordbox (Mac/Windows) The devices that have been recognized are indicated on the DJ player’s screen. Ex.: When connecting a computer (Mac/Windows) The connection completed screen appears. rekordbox (iOS/Android) rekordbox (Mac/Windows) This completes checking the connections. En 19 Connecting the CDJ-2000/CDJ-900 and DJM-2000nexus/DJM-2000 4 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card Equipment used ! ! ! ! ! ! CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units) Computer (Mac/Windows) on which rekordbox is installed USB device or SD memory card on which music files analyzed with rekordbox are stored DJM-2000nexus or DJM-2000 Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE UTILITY MENU OFF ON POWER LINK UNLOCK MIC DISC EJECT CD /DIGITAL TRIM SD +9 MIC LEVEL AUTO CUE - TOUCH / BRAKE HI OVER -12 +12 RELOOP/EXIT NEEDLE SEARCH LOOP DELETE MEMORY CUE / LOOP CALL -12 +12 TALK OFF ON OVER RELEASE / START OUT ADJUST MULTI TAP DELAY EQ/ -3 ISO -5 +6 ECHO REVERB MIC B CD /DIGITAL M GATE TRANS 4-BEAT LOOP LOOP CUTTER LIGHT HEAVY VINYL CDJ NOISE JET ZIP HPF CRUSH LPF -7 EQ/ 10 16 WIDE PARAMETER MAX MIN MAX MIN MAX +6 -26/ -7 3/4 1/1 2/1 - 10 LOW - 24 EQ/ ISO -7 -26/ - 15 TIME LEVEL/DEPTH dB MAX EQ/ -3 -26/ MAX MIN RELOOP /EXIT LOOP NEEDLE SEARCH CUE / LOOP CALL DELETE MEMORY RELEASE / START -7 - 10 IN ADJUST OUT ADJUST 4-BEAT LOOP - 15 JOG ADJUST - 24 dB L R REC / CALL LOOP CUTTER LIGHT +6 -26/ FILTER HEAVY VINYL CDJ DIRECTION MIN MAX MAX MIN JOG MODE BALANCE FILTER CUE MIN OUT -5 LOW dB +6 -26/ ON/OFF IN / CUE -3 ISO +6 - 24 dB TAP MIN TOUCH / BRAKE -2 - 15 - 24 AUTO /TAP +6 FILTER VINYL SPEED ADJUST -1 MID -5 -7 AUTO CUE 1 - 10 LOW TIME MODE HOT CUE 2 0 -2 +6 DISC 4 +6 -26/ -1 MID - 10 - 15 - 24 -26/ 4/1 0 -2 -3 1/2 LOCK DISC EJECT SD 7 4 2 -5 1/4 1/8 STANDBY UNLOCK SD 10 HI 7 1 +6 -26/ -1 MIN -5 - 15 +6 -26/ 0 OFF ON POWER 0 +9 10 HI 7 2 -3 ISO +9 10 4 HI TAG TRACK / REMOVE OVER OVER SEND/ RETURN PHASER 1 -2 dB JOG MODE TEMPO 6 FWD FILTER MID 0 -1 MID FILTER DIRECTION SLIP ROLL LOW 1 BACK MENU USB - TRIM OVER INFO USB STOP CD /DIGITAL PHONO USB 7/8 USB 5/6 LINE TRIM REV ROLL ROLL A EFFECT FREQUENCY 4 - 10 LOW 10 2 +6 -26/ -2 INST FX JOG ADJUST 0 -1 MID -26/ REC / CALL DELAY CH SELECT 4 7 1 +6 -26/ LOW OUT +9 HI 4 2 HI EQ 10 7 0 VINYL SPEED ADJUST IN ADJUST 3 EFFECT SELECT DISC SD IN / CUE 2 TRIM OVER TIME MODE 1 USB 3/4 LINE TAG LIST LINK MASTER CD /DIGITAL PHONO USB 1/2 LOCK USB HOT CUE BROWSE OFF ON POWER STANDBY USB STOP MAX R L TEMPO 6 FWD REV 10 16 WIDE REV CUE MASTER TEMPO MIN TRACK SEARCH LIVE SAMPLER CUE CUE CUE CUE MASTER TEMPO MAX LINK UTILITY CUE 10 10 HEADPHONES MONO SPLIT MONO STEREO MIDI TRACK SEARCH WAKE UP 8 7 8 7 MIX SEARCH 6 6 5 5 4 4 MIXING BOOTH MONITOR 9 9 STEREO SEARCH 3 MIDI 3 REMIX 2 1 2 1 ON /OFF 0 START/STOP Audio cable 0 0 SNAPSHOT CUE 0 CUE REV CH EQ A THRU B A THRU B A CROSS FADER ASSIGN B A THRU PROFESSIONAL MIXER A TEMPO THRU CROSS FADER ASSIGN PHONES CDJ-2000 CUE TEMPO RESET CUE 0 FWD MULTI PLAYER 0 CURVE SETTING ON/OFF TEMPO RESET PLAY / PAUSE MASTER LEVEL B DJM-2000 B ISOLATOR EQ CH FADER PLAY / PAUSE REV FWD CROSS FADER TEMPO CDJ-2000 MULTI PLAYER DJM-2000 LAN cable (wired) CDJ-2000 CDJ-2000 Connection procedure Creating the [PLAYER No.] setting 1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set [PLAYER No.] to [AUTO]. [PLAYER No.] setting screen ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. 20 En Connecting the cables (LAN cable and audio cables) Connect the LAN cable and audio cables. Connect in such a way that the channel number of the DJ mixer’s LAN cable insertion port and the channel number of the terminals to which the audio cables are connected are the same number. Connect the computer to [COMPUTER1] or [COMPUTER2]. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to [COMPUTER1] PHONO L SIGNAL GND R CH 3 CD LINE CD L LINE CHL 3CD POWER AUDIO OUT R CONTROL L OFF ON DIGITAL OUT POWER R R MASTER1 L 1GND 2HOT MASTER2 L CH 4 REC OUT BOOTH R 3COLD (TRS) CH 3 R CH 1LINK CH 2 R R SIGNAL GND CD COMPUTER 1 L(MONO) R AUDIO OUT CD DIGITAL R CONTROL L DIGITAL OUT R CH 3 CH 1 RETURN COMPUTER 1 MIDI OUT L(MONO) LINK USB USB LINK -6dB -3dB 0dB CH 4 R MASTER ATT. CDJ-2000 CH 1 PHONO L CONTROL CD DIGITAL SEND L CH 1 POWER IN O) USB AC IN DIGITAL OUT CONTROL CD DIGITAL CD DIGITAL R LINK CH 2 CH 2 CH 4 CH 2 CDJ-2000 DJM-2000 Checking the connections Checking the DJ player’s link established by LAN connection (for the CDJ-2000) Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. Checking the DJ player’s link established by LAN connection (for the CDJ-900) Connecting the CDJ-2000/CDJ-900 and DJM-2000nexus/DJM-2000 CONTROL CD DIGITAL CH 4 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is displayed for [LINK STATUS]. LINK OK UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL LINK NG UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL 2 CONNECTED ON – 2 NOT CONNECTED ON – ! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure. ! Set the second DJ player on in the same way. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If the numbers are different, fix the connections. CD /DIGITAL PHONO USB 1/2 CD /DIGITAL TRIM USB 3/4 LINE TRIM OVER +9 HI OVER +9 10 HI 7 +6 -26/ 4 2 2 1 1 0 +6 -26/ -1 MID -3 ISO CDJ-2000 -5 +6 -26/ -7 -2 EQ/ -3 ISO -5 +6 -26/ - 10 LOW - 15 - 24 - 24 dB FILTER CDJ-900 -7 - 10 LOW - 15 +6 -26/ 0 -1 MID -2 EQ/ 10 7 4 dB +6 -26/ FILTER DJM-2000 ! Set the second DJ player on in the same way. En 21 Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button. — To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button. — To use a USB device connected by wire to the USB "A terminal": Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed). 2 Press the [LINK] button. UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE MENU LINK USB SD DISC TIME MODE AUTO CUE 3 Click the [LINK] button to connect. rekordbox (Mac/Windows) The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. 55.481 mm Ex.: When connecting a computer (Mac/Windows) rekordbox (Mac/Windows) This completes checking the connections. 22 En Connecting the CDJ-2000/CDJ-900 and DJM-900nexus 5 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card Equipment used Connecting the CDJ-2000/CDJ-900 and DJM-900nexus ! CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units) ! Switching hub ! Computer (Mac/Windows) on which rekordbox is installed ! USB device or SD memory card on which music files analyzed with rekordbox are stored !DJM-900nexus ! Audio cable ! LAN cables (one for each DJ player + two more) Connections diagram (when connecting two DJ players) UTILITY BROWSE TAG LIST INFO BACK POWER TAG TRACK / REMOVE MENU MIC OFF ON POWER LINK UNLOCK USB CD/ LINE LINE DIGITAL USB 3 /4 CD/ LINE LINE DIGITAL USB 5/ 6 CD/ LINE PHONO DIGITAL USB 7/ 8 TRIM LEVEL 12 LOOP NEEDLE SEARCH CUE / LOOP CALL 12 EQ - 7 -26 / 12 TALK OFF ON OVER IN ADJUST OUT ADJUST 4-BEAT LOOP JOG ADJUST LOOP CUTTER LIGHT HEAVY VINYL CDJ JOG MODE DUB ECHO SPACE ms TEMPO 6 FWD 10 16 NOISE TOUCH / BRAKE FILTER BEAT -15 -15 -15 -24 -24 -24 -24 dB 6 -26 / COLOR dB 6 -26 / COLOR dB 6 -26 / COLOR LINK HI LOW HI LOW 6 L dB LOW HI CUE CUE CUE CUE L AUTO / TAP 10 9 STEREO LOOP CUTTER HEAVY 8 7 REV ROLL MIDI LFO SND/ RTN 4 MIC 2 16 WIDE TRACK SEARCH CF.A CF.B 1 MASTER 4 3 0 3 2 2 1 1 1 0 0 0 SEARCH TIME 5 4 3 10 MASTER TEMPO ROLL ECHO 6 5 4 2 EQ CURVE ISOLATOR EQ Audio cable MASTER LEVEL / DEPTH LEVEL 0 A THRU B A THRU B A THRU B A THRU B 0 CH FADER CUE TEMPO RESET MIN 0 CROSS FADER CROSS FADER ASSIGN FWD A TEMPO RESET MAX ON / OFF PLAY / PAUSE PHONES REV FWD B TEMPO TEMPO CDJ-2000 CDJ-2000 JOG MODE TEMPO 6 REV 7 6 5 BOOTH MONITOR 9 8 7 6 MULTI PLAYER VINYL FWD SLIP ROLL 3 10 9 8 STEREO MIXING CUE REV REC / CALL MELODIC DELAY HEADPHONES CUE RELEASE / START JOG ADJUST CDJ 4 SEARCH PLAY / PAUSE DELETE MEMORY LIGHT TRANS SPIRAL 3 CUE / LOOP CALL DIRECTION REVERB 10 MONO SPLIT QUANTIZE TAP FLANGER PHASER FILTER ROBOT CUE MONO 2 OUT ADJUST 4-BEAT LOOP R R FADER START 1 IN ADJUST BALANCE COLOR HI CUE MASTER TEMPO TRACK SEARCH NEEDLE SEARCH CUE LOW WIDE REV RELOOP /EXIT LOOP -10 -15 -26 / OUT -7 6 LOW -24 GATE/ COMP CRUSH AUTO CUE VINYL SPEED ADJUST IN / CUE -5 SOUND COLOR FX DIRECTION TIME MODE HOT CUE -3 ISO -10 DISC SD % X- PAD -15 dB REC / CALL EQ/ - 7 -26 / 6 4 MS T GRID BPM -1 -2 -5 LOW -10 3 B 0 6 MID -3 ISO - 7 -26 / 6 LOW -10 EQ/ -5 2 A PARAMETER 1 -26 / -1 -2 -3 ISO - 7 -26 / 6 LOW -10 EQ/ -5 1 AUTO TAP 4 2 0 6 MID MIC 7 9 1 -26 / -1 -2 -3 ISO -5 12 RELEASE / START EQ/ -3 LOW DELETE MEMORY 6 MID HI 4 2 0 -26 / -1 -2 LOCK CH SELECT 10 7 1 0 6 MID 9 2 1 -26 / HI 4 2 0 -2 OFF ON STANDBY UNLOCK DISC EJECT OVER 10 7 9 HI 4 1 -1 HI RELOOP/EXIT TAG TRACK / REMOVE SD OVER 10 7 9 HI 4 2 0 TOUCH / BRAKE OUT BACK MENU POWER TRIM OVER 10 7 0 MIC 2 VINYL SPEED ADJUST TRIM OVER 10 MIC 1 SD AUTO CUE INFO USB 0 TRIM OVER DISC TAG LIST LINK USB STOP WAKE UP BEAT EFFECTS DISC EJECT IN / CUE BROWSE LFO FORM UTILITY SD TIME MODE MIDI START / STOP ON/ OFF LEVEL LOCK USB HOT CUE UTILITY MASTER CD/ LINE PHONO DIGITAL USB 1/ 2 MIC1 STANDBY USB STOP MULTI PLAYER DJM-900nexus LAN cable (wired) CDJ-2000 CDJ-2000 Connection procedure Creating the [PLAYER No.] setting 1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified for [PLAYER No.] (a number from 1 to 4). [PLAYER No.] setting screen (ex.: when set to [PLAYER 2]) ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously. En 23 Connecting the cables (LAN cable and audio cables) 1 Connect the switching hub and DJM-900nexus by LAN cable. 2 Connect the LAN cable and audio cables. Connect in such a way that the DJ player’s player number and the channel number of the terminals to which the DJ mixer’s audio cables are connected are the same number. Ex.: When player 2 is connected to [CH2], player 3 is connected to [CH3] and the computer (Mac/Windows) is connected to the DJ mixer CH 3 LINE CH 4 PHONO CD/ LINE POWER AUDIO OUT R CONTROL L OFF ON DIGITAL OUT R POWER L RETURN L (MONO) LINE CH 3 CH 2 CD/ LINE LINE L CD/ LINE L CD/ LINE SIGNAL GND CH 1 PHONO CD/ LINE L GND L SIGN SIGNAL GND MIC2 MIDI OUT POWER AUDIO OUT R R R L CH 2 CD/ LINE L LINE LINK R USB R MASTER1 R SEND L (MONO) L L AC IN CDJ-2000 1 GND R R BOOTH MASTER2 REC OUT L L TRS R MASTER2 REC OUT L L L R R 2 HOT 3 COLD R R L BOOTH LINK TRS L CONTROL L DIGITAL OUT R CH2 MASTER OUT RR CH4 DIGITAL CH1 R L LINK USB IN CH3 DJM-900nexus CDJ-2000 Checking the connections Checking the DJ player’s link established by LAN connection (for the CDJ-2000) Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. Checking the DJ player’s link established by LAN connection (for the CDJ-900) Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is displayed for [LINK STATUS]. LINK OK UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL LINK NG UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL 2 CONNECTED ON – 2 NOT CONNECTED ON – ! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure. ! Set the second DJ player on in the same way. Checking that the LAN cable and audio cables are synchronized Load a music file, then operate the DJ players that are connected by link to play and pause the track repeatedly. Check that the player number displayed on the DJ player’s screen is the same as the channel number that lights on the DJ mixer’s channel level indicator. If the numbers are different, fix the connections. CD /DIGITAL PHONO USB 1/2 CD /DIGITAL TRIM USB 3/4 LINE TRIM OVER +9 HI OVER +9 10 HI 7 +6 -26/ 4 2 2 1 1 0 +6 -26/ -1 MID EQ/ -3 ISO -5 +6 -26/ -7 -2 EQ/ -3 ISO -5 +6 -26/ - 10 LOW - 15 - 24 - 24 dB FILTER CDJ-900 24 En DJM-2000 -7 - 10 LOW - 15 +6 -26/ 0 -1 MID -2 CDJ-2000 10 7 4 dB +6 -26/ FILTER Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button. — To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button. — To use a USB device connected by wire to the USB "A terminal": Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed). 2 Press the [LINK] button. UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE MENU LINK USB SD DISC Connecting the CDJ-2000/CDJ-900 and DJM-900nexus TIME MODE AUTO CUE 3 Click the [LINK] button to connect. rekordbox (Mac/Windows) The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. 55.481 mm Ex.: When connecting a computer (Mac/Windows) rekordbox (Mac/Windows) This completes checking the connections. En 25 Connecting the CDJ-2000/CDJ-900 and another mixer 6 Connecting rekordbox by wired connection/Connecting a USB device or SD memory card Equipment used ! ! ! ! ! ! ! CDJ-2000 (1 – 4 units) or CDJ-900 (1 – 4 units) Switching hub Computer (Mac/Windows) on which rekordbox is installed USB device or SD memory card on which music files analyzed with rekordbox are stored Another DJ mixer (DJ mixer other than the DJM-2000nexus/DJM-2000/DJM-900nexus) Audio cable LAN cables (one for each DJ player + one more) Connections diagram (when connecting two DJ players) UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE UTILITY MENU STANDBY UNLOCK BROWSE POWER OFF ON POWER LINK USB STOP MIC LOCK USB MIC1 USB PHONO USB 1/2 CD/LINE LINE USB 3/4 CD/LINE LINE USB 5/6 CD/LINE PHONO LEVEL USB 7/8 TRIM OVER TRIM OVER TRIM OVER TRIM 10 9 7 LEVEL OVER MID -1 IN / CUE OUT RELOOP/EXIT LOOP NEEDLE SEARCH CUE / LOOP CALL DELETE MEMORY 12 RELEASE / START 12 OUT ADJUST 4-BEAT LOOP JOG ADJUST -7 12 OFF REC / CALL 12 -5 -26 / 6 -7 LOW -10 LIGHT HEAVY VINYL CDJ TALK ON OVER -15 JOG MODE dB -26 / FWD 10 16 WIDE CUTTER SOUND COLOR FX CRUSH FILTER -15 6 dB MASTER TEMPO TRACK SEARCH 2 3 HI 4 MONO SPLIT -15 CUE PLAY / PAUSE dB LOW -26 / -7 -15 6 dB RELOOP /EXIT NEEDLE SEARCH CUE / LOOP CALL DELETE MEMORY OUT ADJUST RELEASE / START 4-BEAT LOOP JOG ADJUST -15 -24 -26 / 6 L dB R REC / CALL AUTO / TAP LOOP CUTTER TAP LIGHT HEAVY BEAT LOW COLOR HI LOW CUE HI CUE 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 4 4 3 3 3 2 2 2 1 1 1 0 0 0 VINYL CDJ JOG MODE BALANCE L DIRECTION CUE TEMPO 6 FWD 10 16 WIDE R CUE STEREO REV FILTER FLANGER TRANS PHASER REVERB MASTER TEMPO ROBOT SPIRAL SLIP ROLL ROLL ECHO TRACK SEARCH REV ROLL DELAY SND/ RTN 4 MIC 3 BOOTH MONITOR 2 CF.A CF.B 1 MASTER SEARCH TIME 0 EQ CURVE Audio cable ISOLATOR EQ 0 MASTER LEVEL LEVEL / DEPTH A FWD IN ADJUST BEAT -10 COLOR HI 6 LOW -24 -26 / BEAT TOUCH / BRAKE OUT LOOP PITCH ECHO STEREO CUE TEMPO RESET REV 6 VINYL SPEED ADJUST IN / CUE -5 MONO MIXING 0 -7 AUTO CUE ms -3 ISO -10 CUE HEAD PHONES SEARCH 6 LOW COLOR CUE FADER START 1 -26 / -24 -26 / BEAT LOW REV -7 -5 HOT CUE -2 EQ/ -3 ISO -10 COLOR TEMPO 6 6 LOW -24 -26 / BEAT NOISE DIRECTION -5 4 MST BPM -1 -2 EQ/ -3 ISO -10 -24 LOOP CUTTER EQ/ -3 ISO 3 B % DJ mixer other than the DJM-2000nexus/ DJM-2000/ DJM-900nexus -5 LOW IN ADJUST EQ/ -3 EQ MID -1 -2 2 AUTO TAP 0 6 A PARAMETER 1 0 -26 / MID -1 -2 DISC MIC 2 1 TIME MODE CH SELECT 1 4 2 6 SD 7 HI 4 0 -26 / MID -1 -2 9 7 1 6 LOCK DISC EJECT 10 10 2 0 -26 / 6 HI 4 1 0 -26 / 9 7 2 1 HI 10 HI 4 2 0 9 7 HI 4 0 MIC 2 OFF ON STANDBY UNLOCK SD OVER 10 MIC 1 VINYL SPEED ADJUST TOUCH / BRAKE TAG TRACK / REMOVE USB BEAT EFFECTS 0 DISC AUTO CUE BACK MENU USB STOP UTILITY WAKE UP SD TIME MODE INFO POWER START / STOP ON/ OFF DISC EJECT SD HOT CUE TAG LIST LINK MIDI MASTER CD/LINE THRU B A THRU B A THRU B A THRU B CH FADER 0 MIN CROSS FADER CROSS FADER ASSIGN MAX CUE PLAY / PAUSE TEMPO RESET REV FWD ON / OFF PHONES TEMPO MULTI PLAYER A TEMPO B CDJ-2000 CDJ-2000 MULTI PLAYER LAN cable (wired) CDJ-2000 CDJ-2000 Connection procedure Creating the [PLAYER No.] setting 1 Check that no USB devices or SD memory cards are connected to the DJ player(s), then turn on the power of the DJ player(s) and the DJ mixer(s) before connecting the LAN cables. ! The [PLAYER No.] setting cannot be changed if a USB device or SD memory card is connected or if a link is established. 2 Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then set the number to be specified for [PLAYER No.] (a number from 1 to 4). [PLAYER No.] setting screen (ex.: when set to [PLAYER 2]) ! Set the second DJ player on in the same way. ![PLAYER No.] is set to [AUTO] upon shipment from the factory. ! Set so that no two players have the same player number. If they do, [PLAYER No.] flashes continuously. Connecting the cables (LAN cable and audio cables) For details on connections, see the operating instructions for the respective devices. Connect the LAN cables and audio cables referring to the connections diagrams. 26 En Checking the connections Checking the DJ player’s link established by LAN connection (for the CDJ-2000) Check that the player number indicated on the DJ player’s screen is lit in white. LINK OK LINK NG ! If the player number indicated on the DJ player’s screen is lit in gray, the link is not established. If there is a DJ player for which the player number is lit in gray, redo the connection procedure. ! Set the second DJ player on in the same way. Checking the DJ player’s link established by LAN connection (for the CDJ-900) LINK OK Connecting the CDJ-2000/CDJ-900 and another mixer Press the DJ player’s [MENU/UTILITY] button for over 1 second to open the UTILITY screen, then check that [CONNECTED] is displayed for [LINK STATUS]. LINK NG UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL UTILITY PLAYER No. LINK STATUS AUTO STANDBY MIDI CHANNEL 2 CONNECTED ON – 2 NOT CONNECTED ON – ! If [NOT CONNECTED] is displayed, the link is not established. If there is a DJ player for which [NOT CONNECTED] is displayed, redo the connection procedure. ! Set the second DJ player on in the same way. Checking the connected device(s) 1 Press one of the medium select buttons to check the connection with the respective device. — To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button. — To use a USB device or SD memory card connected to another player that is connected by link: Press the [LINK] button. — To use a USB device connected by wire to the USB "A terminal": Press the [USB] button. — To use an SD memory card: Press the [SD] button. ! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed). 2 Press the [LINK] button. UTILITY BROWSE TAG LIST INFO BACK TAG TRACK / REMOVE MENU LINK USB SD DISC TIME MODE AUTO CUE 3 Click the [LINK] button to connect. rekordbox (Mac/Windows) En 27 The files, folders and lists loaded into the respective devices are displayed on the DJ player’s screen. 55.481 mm Ex.: When connecting a computer (Mac/Windows) rekordbox (Mac/Windows) This completes checking the connections. © 2012 PIONEER CORPORATION. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan <DRI1124-B> 28 En