Download Renesas Embedded Application Programming Interface User`s

Library Reference
4
Description (3/7)
4.2.2
Timer MTU2
__CreateTimer
• Selectable parameters when RAPI_MTU2_0 is specified:
(Count source)
Specify one from { RAPI_MP1, RAPI_MP4, RAPI_MP16,
RAPI_MP64 }. The default value is RAPI_MP1.
(Operation method)
Specify one from { RAPI_FREE_RUNNING, RAPI_PERIODIC }.
The default value is RAPI_FREE_RUNNING.
(Count edge)
Specify one from { RAPI_FALLING_EDGE,
RAPI_RISING_EDGE, RAPI_BOTH_EDGE }.
The default value is RAPI_RISING_EDGE.
Note:
When RAPI_MP1 is specified for the count source,
count edge is fixed to the default value.
• When RAPI_FREE_RUNNING is selected, the following parameters can be set:
(Interrupt enable)
Specify one from { RAPI_OVERFLOW_ENA,
RAPI_OVERFLOW_DIS }.
The default value is RAPI_OVERFLOW_DIS.
(Interrupt priority level)
Specify one from { RAPI_TIMER_INT_LV_0,
RAPI_TIMER_INT_LV_1, RAPI_TIMER_INT_LV_2,
RAPI_TIMER_INT_LV_3, RAPI_TIMER_INT_LV_4,
RAPI_TIMER_INT_LV_5, RAPI_TIMER_INT_LV_6,
RAPI_TIMER_INT_LV_7, RAPI_TIMER_INT_LV_8,
RAPI_TIMER_INT_LV_9, RAPI_TIMER_INT_LV_10,
RAPI_TIMER_INT_LV_11, RAPI_TIMER_INT_LV_12,
RAPI_TIMER_INT_LV_13, RAPI_TIMER_INT_LV_14,
RAPI_TIMER_INT_LV_15 }.
The default value is RAPI_TIMER_INT_LV_0.
• When RAPI_PERIODIC is selected, the following parameters can be set:
(Count clearing source)
Specify one from { RAPI_TCNT_CLEAR_DIS,
RAPI_TCNT_CLEAR_TGRA, RAPI_TCNT_CLEAR_TGRB,
RAPI_TCNT_CLEAR_TGRC, RAPI_TCNT_CLEAR_TGRD,
RAPI_TCNT_CLEAR_DIS_TGRE,
RAPI_TCNT_CLEAR_DIS_TGRF }.
The default value is RAPI_TCNT_CLEAR_DIS.
Rev.1.01 Aug. 27, 2008
REJ10J1906-0101
(Count output)
Specify one from { RAPI_OUTPUT_RETAIN,
RAPI_OUTPUT_0_0, RAPI_OUTPUT_0_1,
RAPI_OUTPUT_0_TOG, RAPI_OUTPUT_1_0,
RAPI_OUTPUT_1_1, RAPI_OUTPUT_1_TOG }.
The default value is RAPI_OUTPUT_RETAIN.
(A/D converter start
request)
Specify one from { RAPI_AD_START_REQ,
RAPI_NO_AD_START_REQ }.
The default value is RAPI_NO_AD_START_REQ.
(Interrupt enable)
Specify one from { RAPI_COMPARE_MATCH_ENA,
RAPI_COMPARE_MATCH_DIS }.
The default value is RAPI_COMPARE_MATCH_DIS.
(Interrupt priority level)
Specify one from { RAPI_TIMER_INT_LV_0,
RAPI_TIMER_INT_LV_1, RAPI_TIMER_INT_LV_2,
RAPI_TIMER_INT_LV_3, RAPI_TIMER_INT_LV_4,
RAPI_TIMER_INT_LV_5, RAPI_TIMER_INT_LV_6,
RAPI_TIMER_INT_LV_7, RAPI_TIMER_INT_LV_8,
RAPI_TIMER_INT_LV_9, RAPI_TIMER_INT_LV_10,
RAPI_TIMER_INT_LV_11, RAPI_TIMER_INT_LV_12,
RAPI_TIMER_INT_LV_13, RAPI_TIMER_INT_LV_14,
RAPI_TIMER_INT_LV_15 }.
The default value is RAPI_TIMER_INT_LV_0.
4-20