USER MANUAL Download

Transcript
USER MANUAL
34
_____________________________________________________________________________________________________________________
16.6 Setting backlight function (b_LIGHt)
The function is used for choosing the work mode of scale
display backlight:
0
kg
-
b_L OFF – switch backlight off,
b_L on – switch backlight permanently on,
b_L ECO – switch off after 30 seconds of inactivity (no load
changes and no key operation),
b_L bAt – like above, but when powering from accumulators
only,
out – out without changes.
Switching backlight off causes decrease of energy
consumption by the scale, what is important during powering
from accumulators.