Download ProofReady plugin

PROOFMATE (PROOFREADY) PLUGIN FOR EPSON STYLUS PRO 7800/9880
4.
Enter the figure of 169000 in the Printer buffer box of the Configure RIP dialog, as shown Figure C.1.
Figure C.1 The Configure RIP dialog
5.
To calculate the minimum memory left for system overhead:
Minimum memory left for system overhead = (Page width in inches) x (minimum memoryleft-factor)
Example:
Page width: 17 inches
Minimum memory left factor: 2.2
Minimum memory left for system overhead: 17 x 2.2 = 37.4 MB
6.
To calculate the total minimum memory left for system required by the RIP:
Total minimum memory left for system = (Minimum memory left for system overhead) +
(Minimum memory left for system base-recommendation)
The base-recommendation value for the printer buffer is 30 MB, so the total printer buffer‚ using the example figures‚ is: 37.4 + 30 = 67.4 MB, or approximately 69000 Kbytes.
7.
Enter the figure of 69000 in the Minimum memory left for system box of the Configure RIP Options dialog, as shown Figure C.2.
Figure C.2 The Configure RIP Options dialog
8.
Click OK to confirm your new memory settings.
AG50567 REV. 5
32