1
Download X-Series Signal Generators Programming Guide
Transcript
Creating and Downloading Waveform Files Troubleshooting Waveform Files Configuring the Pulse/RF Blank If the default marker is used, toggle the Pulse/RF Blank (None) softkey to None. For more information on markers, refer to “Marker File” on page 216. Select Dual Arb > More > Marker Utilities on X-Series signal generators to access this menu. SCPI commands: [:SOURce]:RADio[1]:ARB:MDEStination:PULSe NONE|M1|M2|M3|M4 [:SOURce]:RADio[1]:ARB:MDEStination:PULSe? For details on each key, use the key help. Refer to “Getting Key Help” on page 19 and the User’s Guide. For additional SCPI command information, refer to the SCPI Command Reference. 322 Keysight EXG and MXG X-Series Signal Generators Programming Guide
