Download American Dryer Corp. AD-24 II User's Manual

AD-24 II Parts Manual
24 VAC Phase 5
as of July 17, 2000
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
082500MFM/calbert
ADC Part No. 450341
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with
the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors and
liquids in the vicinity of this or
any other appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables à proximité de cet
appareil ou de tout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________
MODEL NO.
AD-24 II
__________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s)
________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory,
you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508)
678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that
your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 3
Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 4
Phase 5 Microprocessor Control Box Assembly
For Coin and OPL Models ............................................................................................................... 5
Microprocessor Coin Vault Assembly ...................................................................................................... 6
Main Door “Steel” Assembly .................................................................................................................. 7
Slide Meter Case Assembly ................................................................................................................ 8, 9
Cold Rolled Steel (CRS) Front Panel Assembly .................................................................................... 10
Main Door Switch Assembly (Cold Rolled Steel [CRS] Type Door) ...................................................... 11
Basket (Tumbler)/Support Assemblies ................................................................................................... 12
Lint Door Assembly .............................................................................................................................. 13
Sensor Bracket Assemblies ............................................................................................................. 14, 15
Control Door (25¢ Coin Models)
For Models Mfd. as of March 17, 2001 ......................................................................................... 16
Control Door (25¢ Coin Models)
For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 17
Control Door (Slide Meter Models)
For Models Mfd. as of March 17, 2001 ......................................................................................... 18
Control Door (Slide Meter Models)
For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 19
Control Door (OPL and Non 25¢ Coin Models)
For Models Mfd. as of March 17, 2001 ......................................................................................... 20
Control Door (OPL and Non 25¢ Coin Models)
For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 21
Control Door Assembly
For Models Mfd. prior to January 24, 2001 .................................................................................... 22
Basket (Tumbler) Bearing Assembly
For Models Mfd. as of April 27, 2001 ............................................................................................ 23
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to April 27, 2001 .................................................................................. 24, 25
Lint Trap Assembly ............................................................................................................................... 26
Idler Bearing Assembly ......................................................................................................................... 27
Electric Oven Assembly .................................................................................................................. 28, 29
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ......................................................... 30
Gas Burner Assembly ........................................................................................................................... 31
Sail Switch/Hi-Limit Assemblies ............................................................................................................ 32
Single-Phase (1Ø) Motor, Electric Relay Panel Assembly ...................................................................... 33
Slide Meter Control Box Assembly ....................................................................................................... 34
Outer Top/Back Guard Assemblies ....................................................................................................... 35
Electric Oven Component Application Chart ......................................................................................... 36
Additional Parts Available ..................................................................................................................... 37
3
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
------11
Part No.
Qty.
112526
880959
1
1
880958
150309
137213
824998
153010
150005
881163
881143
137023
137021
880772
824080
122800
136048
1
1
1
1
2
2
1
1
1
3
1
1
1
1
Description
Coin Keyboard Label Assembly
Phase 5 Coin Microprocessor Control Panel Assembly
(includes illus. nos. 1, 2, 4, 5, 6, and 11)
Coin Control Panel ONLY
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Phase 5 Coin Controller
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Coin Acceptor with Optical Switch
Optical Switch
Optical Switch Connector
Microprocessor Socket
Single Coin Optic Switch Harness
Dual Coin Optic Switch Harness
Microprocessor (female) Pin Extraction Tool
1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No.
1
Part No.
Qty.
112535
112276
112275
112277
1
1
1
1
112278
1
2
801225
824443
1
1
3
137222
824998
153010
150005
150309
882541
136048
1
1
2
2
1
1
1
4
5
6
7
Description
OPL English Keyboard Label Assembly
OPL Stick-On Labels (English Only) ... Not Illustrated
OPL Stick-On Labels (Spanish, Italian, and Hebrew) ... Not Illustrated
3-Language OPL Stick-On Labels
(English, Spanish, and Hebrew) ... Not Illustrated
5-Language OPL Stick-On Labels
(Italian, Dutch, French, German, and Chinese) ... Not Illustrated
Phase 5 Microprocessor Control Panel ONLY
Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 7)
Phase 5 OPL Non-Reversing Controller
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4” Phillips Round Head Machine Screw
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Spring Turn Latch Assembly
1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller
(computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 5 Microprocessor Control Box Assembly
5
For Coin and OPL Models
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
*
Part No.
141403
150301
120715
150002
151000
136057
150301
136008
122641
122706
305542
150301
Qty.
1
2
1
2
2
*
*
*
1
*
1
2
Description
24 VAC Transformer
#8-18 x 7/16” Phillips Pan Head TEK Screw
30-Position Terminal Block
#6-32 x 1” Round Head Machine Screw
#6-32 Pal Nut
1/2-Amp (Slo-Blo) Fuse ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block/Strip
15-Pin Microprocessor Connector
Socket Terminal
Battery Bracket
#8-18 x 7/16” Phillips Pan Head TEK Screw
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
6
Microprocessor Coin Vault Assembly
Illus. No.
1
Qty.
802146
1
3
802139
160027
160127*
160022
160113*
802138
1
1
1
1
1
1
4
5
6
7
8
802147
153050
152014
102502
102601
102603
1
4
4
1
1
1
2
*
Part No.
Description
Security Coin Vault Assembly Complete
(includes illus. nos. 1 through 3)
High Security Coin Vault ONLY
High Security Lock with Key (each keyed different)
Key ONLY For High Security Lock
High Security Screw Lock with Key
Key ONLY For High Security Screw Lock
High Security Coin Box Assembly with Lock
(includes illus. nos. 2 and 3)
High Security Coin Box ONLY
1/2” S.A.E. Flat Washer
1/4-20 Free Spin Wash Nut
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Support Rod Catch
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Main Door “Steel” Assembly
Illus. No.
Part No.
Qty.
1
881150
1
2
3
102354
170730
170731
881152
1
1
1
1
4
5
6
150445
153031
881151
2
1
1
7
150445
150443
150683
152014
151010
150120
150683
152014
881210
170333
102211
102360
2
2
3
3
1
1
3
3
1
1
1
1
170731
1
8
9
10
11
12
13
14
15
Telephone: (508) 678-9000
7
Description
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Clear Glass Adhesive (10.3 oz. cartridge)
Black Glass Adhesive (10.3 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4” Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7)
1/4-20 x 3/4” Black Cap Head Setscrew
1/4-20 x 3/4” Stainless Steel Cap Head Setscrew
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8” Black Carriage Bolt
1/4-20 Free Spin Wash Nut
Black Main Door Handle ONLY
Stainless Steel Main Door Handle ONLY
20-7/16” Door Glass
Glass/Door Gasket Tape
(for models mfd. as of February 9, 2001)
Black Glass Adhesive (10.3 oz. cartridge)
(for models mfd. prior to February 9, 2001)
Fax: (508) 678-9447
8
American Dryer Corporation
Slide Meter Case Assembly
88 Currant Road / Fall River, MA 02720-4781
9
Slide Meter Case Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
160099
160199*
125908
122643
122642
152014
122603
122631
881100
122701
125900
154001
150300
881015
1
1
1
9
1
4
1
2
1
21
1
2
4
1
14
15
16
17
18
19
20
21
22
23
24
880937
122400
131917
123005
125903
--------------801701
102502
102601
102603
150207
1
1
1
1
1
1
1
1
1
1
1
2
*
Description
Lock/Key/Cam and Hardware
Key ONLY for Slide Meter Lock
Slide Meter Accumulator - 24 VAC - 60 RPM (60 Hz Only)
Mate-N-Lock Pin ONLY
9-Position Mini-Universal Socket
1/4-20 Free Spin Wash Nut
9-Position Connector (Mate-N-Lock)
6-Position Connector (Mate-N-Lock)
Slide Meter Modular J-Box Assembly
Socket Terminal ONLY
Slide Meter Case with Door Less Lock
#10-24 Speed Nut
#10-16 x 1/2” Hex Washer TEK Screw
Slide Meter Control Panel (faceplate) Complete
(includes illus. nos. 11 and 13 through 16)
Slide Meter Control Panel (faceplate) ONLY
Rocker Heat Selector Switch
Push-to-Start Relay - 24 VAC
Red Light Indicator - 24 VAC
Slide Meter Extension
Typical Slide Meter Coin Chute (not available from ADC)
Typical Slide Meter Coin Box (not available from ADC)
Slide Meter Case Mounting Plate
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Support Rod Catch
#10-24 x 1/2” Round Head Machine Screw
Specify key number when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
10
Cold Rolled Steel (CRS) Front Panel Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
802511*
154215
170330
150309
150313
1
2
1
9
9
150318
-
*
Description
Front Panel Assembly (cold rolled steel [CRS] door)
1/8” Pop Rivets
Friction Door Latch
#10-16 x 1/2” Hex Head TEK Crimptite Screw
TORX Head Screw
(for models mfd. as of October 2, 2000)
Torx Plus Bit (for removal of Torx Screw)
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly (Cold Rolled Steel [CRS] Type Door)
Illus. No.
1
2
3
4
5
6
7
Part No.
Qty.
150006
152013
153010
137005
122636
881211
881212
881213
881214
881153
2
2
2
1
2
1
1
1
1
1
881215
1
881216
1
881217
1
150301
2
Telephone: (508) 678-9000
11
Description
#6-32 x 7/8” Phillips Pan Head Machine Screw
#6-32 Hex Nut
#6 Star Washer
Door Switch ONLY
Flag Terminal
Black Main Door Switch Housing ONLY
Beige Main Door Switch Housing ONLY
White Main Door Switch Housing ONLY
Blue Main Door Switch Housing ONLY
Black Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
Beige Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
White Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
Blue Main Door Switch Housing Complete
(includes illus. nos. 1 through 4 and 6)
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fax: (508) 678-9447
12
Illus. No.
Basket (Tumbler)/Support Assemblies
Part No.
Qty.
1
800843
1
2
800717
154210
1
30
150309
30
301318
301317
150518
100916
153003
800612
153001
153002
152004
115986
2
1
1
3
3
1
3
3
3
1
3
4
5
6
7
8
9
10
11
American Dryer Corporation
Description
Basket (tumbler) and Support Assembly Complete
(includes illus. nos. 1 through 10)
Basket (tumbler) ONLY
5/32” x 3/16” Pop Rivet
(for models mfd. as of December 12, 2000)
#10-16 x 1/2” Hex Head TEK Crimptite Screw
(for models mfd. prior to December 12, 2000)
Tapered Rib ONLY (low rib)
Tapered Rib ONLY (high rib)
5/16-18 x 3/8” Socket Screw
3/8-16 x 25” Hex Head Tie Rod
3/8” x 1-1/2” Fender Washer
Basket (tumbler) Support ONLY
5/16” Flat Washer
5/16” Lock Washer
5/16-18 Hex Nut
Basket (tumbler) Felt Pad
88 Currant Road / Fall River, MA 02720-4781
13
Lint Door Assembly
Illus. No.
Part No.
Qty.
1
2
3
882981*
170226
117604
1
1
2
*
Description
Right Hand Hinge Lint Door Assembly with Slide Latch
Slide Latch Flush Style (black)
1/8” x 3/8” Neoprene Sponge Tape
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Sensor Bracket Assemblies
Microprocessor Sensor Bracket Assembly
Noncomputer Sensor Bracket Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
15
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
7
8
9
10
130103
153010
152000
121028
122701
122605
154007
150005
801425
1
2
2
2
4
1
2
2
1
11
12
13
14
15
16
17
18
19
20
21
22
23
24
122604
122700
150301
150005
130103
130111
130100
130101
153010
152000
121028
840065
122701
122605
840062
1
4
2
*
1
1
1
1
*
*
**
1
***
1
1
25
801418
1
26
27
122604
122700
122801
150301
1
***
1
2
28
Description
1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225º Large Automatic Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal
Socket Terminal
4-Pin Socket Connector
1/4” Tinnerman Push On Fastener
#6-32 x 1/4” Phillips Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16” Phillips Pan Head TEK Screw
#6-32 x 1/4” Phillips Round Head Machine Screw
225º Large Automatic Reset Thermostat
150º Large Thermostat
130º Large Thermostat
180º Large Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal
Sensor Jumper (4)
Socket Terminal
4-Pin Socket Connector ONLY
Sensor (4) Bracket Harness Assembly
(includes illus. nos. 21, 23, and 24)
Noncomputer Sensor (4) Bracket Harness Assembly Complete
(includes thermostats)
(includes illus. nos. 14 through 27)
4-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 7/16” Phillips Pan Head TEK Screw
* Qty. = 4 or 5.
** Qty. = 6 or 8.
*** Qty. = 3 or 4.
Telephone: (508) 678-9000
Fax: (508) 678-9447
16
Control Door (25¢ Coin Models)
For Models Mfd. as of March 17, 2001
Illus. No.
Part No.
Qty.
1
883001**
1
2
3
4
5
6
7
8
802514
117604
117605
152014
160040
160140
881053
1
3
2
5
2
*
1
Description
Coin Control Door without Locks
(includes illus. nos. 1 through 4)
Control Door Trim (cold rolled steel [CRS])
1/8” x 3/8” Neoprene Sponge Tape
1/4” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
XX4451 Lock
XX4451 Key
ADC Logo with Adhesive Tape
* As required.
** Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Control Door (25¢ Coin Models)
17
For Models Mfd. between January 24, 2001 and March 16, 2001
Illus. No.
Part No.
Qty.
1
883001**
1
2
3
4
5
6
7
8
9
802514
117604
117605
152014
150420
160040
160140
881053
1
3
2
5
2
2
*
1
Description
Coin Control Door without Locks
(includes illus. nos. 1 through 4)
Control Door Trim (cold rolled steel [CRS])
1/8” x 3/8” Neoprene Sponge Tape
1/4” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
#10-16 x 5/8” TEK Tamperproof Screw
XX4451 Lock
XX4451 Key
ADC Logo with Adhesive Tape
* As required.
** Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
18
Control Door (Slide Meter Models)
For Models Mfd. as of March 17, 2001
Illus. No.
Part No.
Qty.
1
883000**
1
2
3
4
5
6
7
8
802514
117604
117605
152014
160040
160140
881053
1
3
2
5
2
*
1
Description
Slide Meter Control Door without Locks
(includes illus. nos. 1 through 4)
Control Door Trim (cold rolled steel [CRS])
1/8” x 3/8” Neoprene Sponge Tape
1/4” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
XX4451 Lock
XX4451 Key
ADC Logo with Adhesive Tape
* As required.
** Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Control Door (Slide Meter Models)
19
For Models Mfd. between January 24, 2001 and March 16, 2001
Illus. No.
Part No.
Qty.
1
883000**
1
2
3
4
5
6
7
8
9
802514
117604
117605
152014
150420
160040
160140
881053
1
3
2
5
2
2
*
1
Description
Slide Meter Control Door without Locks
(includes illus. nos. 1 through 4)
Control Door Trim (cold rolled steel [CRS])
1/8” x 3/8” Neoprene Sponge Tape
1/4” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
#10-16 x 5/8” TEK - 3 Tamperproof Screw
XX4451 Lock
XX4451 Key
ADC Logo with Adhesive Tape
* As required.
** Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Control Door (OPL and Non 25¢ Coin Models)
For Models Mfd. as of March 17, 2001
Illus. No.
Part No.
Qty.
1
882999**
1
2
3
4
5
6
7
8
802514
117604
117605
152014
160040
160140
881053
1
3
2
5
2
*
1
Description
OPL and Non 25¢ Coin Control Door without Locks
(includes illus. nos. 1 through 4)
Control Door Trim (cold rolled steel [CRS])
1/8” x 3/8” Neoprene Sponge Tape
1/4” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
XX4451 Lock
XX4451 Key
ADC Logo with Adhesive Tape
* As required.
** Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
21
Control Door (OPL and Non 25¢ Coin Models)
For Models Mfd. between January 24, 2001 and March 16, 2001
Illus. No.
Part No.
Qty.
1
882999**
1
2
3
4
5
6
7
8
9
802514
117604
117605
152014
150420
160040
160140
881053
1
3
2
5
2
2
*
1
Description
OPL and Non 25¢ Coin Control Door without Locks
(includes illus. nos. 1 through 4)
Control Door Trim (cold rolled steel [CRS])
1/8” x 3/8” Neoprene Sponge Tape
1/4” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
#10-16 x 5/8” TEK Tamperproof Screw
XX4451 Lock
XX4451 Key
ADC Logo with Adhesive Tape
* As required.
** Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
22
Control Door Assembly
For Models Mfd. prior to January 24, 2001
Illus. No.
Part No.
Qty.
1
882984*
1
2
3
4
5
6
7
8
802514
117604
117605
152014
160040
160140
881053
3
2
5
2
2
1
*
Description
Control Door with Cold Rolled Steel (CRS) Trim with Hinge
(includes illus. nos. 1 through 4)
Cold Rolled Steel (CRS) Control Door Trim
1/8” x 3/8” Neoprene Sponge Tape
1/4” x 3/8” Neoprene Sponge Tape
1/4-20 Free Spin Wash Nut
XX4451 Lock
XX4451 Key
ADC Logo with Adhesive Tape
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
23
For Models Mfd. as of April 27, 2001
Illus. No.
Part No.
Qty.
1
2
3
4
880209
153005
152005
882544
1
12
4
1
5
6
7
8
9
10
11
12
13
14
15
16
17
18
882542
880202
150601
153004
153005
152005
154326
152004
150621
153002
150501
100713
101100
100100
150610
1
1
2
8
2
2
2
4
2
4
4
1
1
1
2
Telephone: (508) 678-9000
Description
1-3/8” 4 Bolt Pressed Steel Round Bearing
3/8” Lock Washer
3/8-16 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 14 and 18)
Bearing Support ONLY
1-3/8” Pillow Block Bearing
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Lock Washer
3/9-16 Hex Nut
5/16-24 x 3/8” Setscrew Black
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
5/16-18 x 3/4” Tap Bolt
1/4” x 1/4” x 7/8” Key
18” Pulley
5L-660 V-Belt (to idler assembly)
5/16-18 x 1-1/2” Allen Setscrew
Fax: (508) 678-9447
24
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to April 27, 2001
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
25
Basket (Tumbler) Bearing Assembly
For Models Mfd. prior to April 27, 2001
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Part No.
Qty.
880203
153005
152005
882544
1
4
4
1
882545
1
882542
882543
880202
880779
150601
153004
153005
152005
154326
152004
150621
153002
150501
102120
824807
100713
101100
100111
150610
1
1
1
1
2
8
2
2
2
4
2
4
4
1
1
1
1
1
2
Telephone: (508) 678-9000
Description
1-3/8” Flange Bearing
3/8” Lock Washer
3/8-16 Hex Nut
Pillow Block Bearing Assembly Complete
(includes illus. nos. 4 through 19)
Pillow Block Bearing Assembly Complete (with rotational sensor)
(includes illus. nos. 4 through 16)
Bearing Support ONLY
Bearing Support ONLY (with rotational sensor)
1-3/8” Pillow Block Bearing ONLY
1-3/8” Pillow Block Bearing Assembly (with rotational sensor)
3/8-16 x 2” Hex Bolt
3/8” Flat Washer
3/8” Lock Washer
3/8-16 Hex Nut
5/16-24 x 3/8” Black Setscrew
5/16-18 Hex Nut
5/16-18 x 1-1/2” Tap Bolt
5/16” Lock Washer
5/16-18 x 3/4” Tap Bolt
Sintered 8 Magnet
Rotational Sensor Assembly (with rotational sensor)
1/4” x 1/4” x 7/8” Key
18” Pulley
5L-650 V-Belt (to idler assembly)
5/16-18 x 1-1/2” Allen Setscrew
Fax: (508) 678-9447
26
Illus. No.
Lint Trap Assembly
Part No.
Qty.
1
800429
1
2
3
4
5
6
7
8
800419
154200
304102
150300
800503
323724
122116
150425
1
7
1
3
1
1
1
2
American Dryer Corporation
Description
Lint Trap Assembly Complete
(includes illus. nos. 1 and 3 through 5)
Lint Trap ONLY
5/32” Pop Rivet
Lint Screen Holder
#10-16 x 1/2” Hex Washer TEK Screw
Lint Screen ONLY
Lint Drawer Switch Bracket
Lint Drawer Switch
#12-24 x 3/8” Slotted Pan Head Screw
88 Currant Road / Fall River, MA 02720-4781
27
Idler Bearing Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
100111
101129
100105
154301
100705
882576
1
1
1
2
1
1
7
8
9
10
11
12
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
Telephone: (508) 678-9000
Description
5L-650 V-Belt
9” x 2-1/2” Compound Pulley
4L-520 V-Belt (idler to motor)
5/16-18 x 1” Allen Setscrew
3/16” x 3/16” x 1-3/8” Key
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12)
3/8-16 x 1” Hex Head Machine Bolt
3/8” Lock Washer
3/8” Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3” Hex Head Machine Bolt
Fax: (508) 678-9447
28
Electric Oven Assembly
ELECTRIC OVEN (FRONT VIEW)
ELECTRIC OVEN (REAR VIEW)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
29
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803003*
--------*
--------*
150300
802800
802801
1
1
1
2
1
1
154004
150309
802799
122200
150303
105500
319202
154002
150300
803100
320611
150402
130400
150300
154001
121010
152014
--------*
--------*
120081
120080
152008
121011
--------*
153009
321300
150402
1
2
1
1
2
1
1
1
2
1
1
2
1
2
1
1
3
1
1
1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
*
Description
Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10-16 x 1/2” Hex Washer TEK Screw
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover
Sail Switch
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
#10-16 x 1/2” Hex Washer TEK Screw
Electric Oven Front Cover
Large Relay Box Cover
#10-24 x 5/8” Slotted Truss Head Machine Screw
290º Hi-Limit
#10-16 x 1/2” Hex Washer TEK Screw
#10-24 Speed Nut
L-70 Ground Lug
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar (sold by the foot)
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 5/8” Slotted Truss Head Machine Screw
Refer to Electric Oven Component Application Chart on page 36.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
100105
101131
150501
153002
153001
100065*
1
1
4
4
4
1
7
8
122701
137030
122801
152004
153002
153001
117600
154000
800909
803871*
8
1
1
4
4
4
4
4
1
1
153050
100604
100702
153050
152006
2
1
1
2
2
9
10
11
12
13
14
15
16
17
18
19
*
Description
4L-520 V-Belt (to idler bearing assembly)
1/2” x 2-1/4” Motor Pulley (for use on 1Ø 60 Hz models Only)
5/16-18 x 3/4” Tap Bolt
5/16” Lock Washer
5/16” Flat Washer
1/2 HP 115-230v 1Ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor with Plug
Socket Terminal
8-Pin Housing Connector ONLY
Pin/Socket Extraction Tool
5/16-18 Hex Nut
5/16” Lock Washer
5/16” Flat Washer
Noise Suppressor Tape (sold by the foot)
5/16-18 Tinnerman Nut
1/2 HP Motor Mount ONLY (56Z frame)
1/2 HP 115-230v 1Ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.)
Motor Mount Assembly with Plug Motor
(includes illus. nos. 3 through 8 and 13 through 19)
1/2” S.A.E. Flat Washer
12-1/2” Impellor (fan) with 1/2” Bore
1/8” x 1/8” x 1-1/2” Key
1/2” S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
31
Gas Burner Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Part No.
Qty.
141104
151001
150108
140815
140800
141230
318714
150309
128927
140411
809307
801048
810030
150300
152013
142707
142506
142600
142809
882982
2
2
2
2
2
1
1
5
1
1
1
1
1
9
2
1
1
1
1
1
882983
1
Telephone: (508) 678-9000
Description
Small Tube Burner
#8-32 Pal Nut
#8-32 x 1/2” Phillips Pan Head Machine Screw
#37 Orifice (natural gas)
#52 Orifice (liquid propane [L.P.] gas)
1/2” Direct Spark Ignition (DSI) Manifold (2-port)
1-Piece Gas Valve Bracket
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Gas Valve
Liquid Propane (L.P.) Conversion Kit For Gas Valve
Ignitor-Probe Assembly
ADC Direct Spark Ignition (DSI) Johnson Module (three [3] tries)
Johnson Direct Spark Ignition (DSI) Module Mounting Bracket
#10-16 x 1/2” Hex Washer TEK Screw
#6-32 Hex Nut
1/2” x 1-1/2” Long Black Nipple
1/2” Street Elbow
1/2” Black Union
1/2” x 29-1/8” Pipe
Direct Spark Ignition (DSI) Burner Box - Natural Gas
(includes illus. nos. 1 through 3 and 5 through 17)
Direct Spark Ignition (DSI) Burner Box - Liquid Propane (L.P.) Gas
(includes illus. nos. 1 through 3 and 5 through 17)
Fax: (508) 678-9447
32
Illus. No.
Sail Switch/Hi-Limit Assemblies
Part No.
Qty.
1
2
3
4
5
6
7
8
9
154004
150309
802799
150303
122200
105500
319202
154002
802801
1
2
1
2
1
1
1
1
1
10
11
12
13
14
15
802800
142809
150309
319704
151000
150001
130403
1
1
2
1
2
2
1
American Dryer Corporation
Description
Twin Speed Nut
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket
#4 x 3/4” Pan Head “A” Machine Screw
Sail Switch
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8” Push On Fastener
Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 9)
Sail Switch Box with Cover and Bracket ONLY
1/2” x 29-1/8” Pipe
#10-16 x 1/2” Hex Head TEK Crimptite Screw
Hi-Limit Mounting Bracket
#6-32 Pal Nut
#6-32 x 1/2” Round Head Machine Screw
330º Hi-Limit
88 Currant Road / Fall River, MA 02720-4781
33
Single-Phase (1Ø) Motor, Electric Relay Panel Assembly
Illus. No.
1
2
3
-
Part No.
132475
150299
824828
322809
150301
Qty.
1
2
1
1
4
Telephone: (508) 678-9000
Description
2-Pole Contactor - 24 VAC
#10 x 1” Hex Washer TEK Screw
RC Network with Connector
Back Electrical Box Cover ... Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
Fax: (508) 678-9447
34
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
----*
Slide Meter Control Box Assembly
Part No.
132475
150299
150300
141403
136057
150301
136008
150002
120715
151000
152004
153002
305520
322809
150301
Qty.
1
2
2
1
*
*
*
2
1
2
1
1
1
1
4
Description
2-Pole Contactor - 24 VAC
#10 x 1” Hex Washer TEK Screw
#10-16 x 1/2” Hex Washer TEK Screw
24 VAC Transformer
1/2-Amp (Slo-Blo) Fuse
#8-18 x 7/16” Phillips Pan Head TEK Screw
Fuse Block/Strip
#6-32 x 1” Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
5/16-18 Hex Nut
5/16” Lock Washer
Rear Contact Plate
Back Electrical Box Cover ... Not Illustrated
#8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated
As required.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Outer Top/Back Guard Assemblies
Illus. No.
1
2
3
4
5
6
7
8
9
Part No.
322809
150301
330660
150301
150301
330767
330609
150301
103500
Qty.
1
4
1
7
10
1
1
13
4
Telephone: (508) 678-9000
35
Description
Back Electrical Box Cover
#8-18 x 7/16” Phillips Pan Head TEK Screw
Top Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
#8-18 x 7/16” Phillips Pan Head TEK Screw
Outer Top
Bottom Back Guard
#8-18 x 7/16” Phillips Pan Head TEK Screw
Leveling Leg
Fax: (508) 678-9447
36
American Dryer Corporation
ADE-24 II
OVEN WIRE
ELEMENT
TERMINAL LUG
BUS BAR
OVEN RELAY
Volt
Phase
Wire
Oven Assy.*
24
460/480
3ø
3 or 4
824951
6
4
120009
4
#10
133300
6
121010
2
BEAJ
131352
24
4 16
3ø
3 or 4
824945
6
4
120008
4
#8
133100
6
121010
2
BEAJ
131352
24
240
3ø
3
824932
6
4
12 0 0 0 9
3
#6
133200
3
121012
1
DEAJ
131361
24
208
3ø
3 or 4
824915
6
4
120008
3
#4
133300
4
121012
1
DPA63
131369
20
380
3ø
3 or 4
824938
6
4
120008
4
#10
133000
6
121010
2
BEAJ
131352
20
240
1ø
2
824927
5
4
12 0 0 0 9
2
#4
133300
2
121012
2
FEAJ
131375
20
208
1ø
2
824905
5
4
12 0 0 0 8
2
#4
133300
2
121012
2
GEAJ
131385
18
460/480
3ø
3 or 4
824950
6
3
120007
4
#10
133000
6
121010
2
BEAJ
131352
18
4 16
3ø
3 or 4
824944
6
3
12 0 0 0 6
4
#10
13 3 0 0 0
6
121010
2
BEAJ
131352
18
240
3ø
3
824931
6
3
120007
3
#8
133100
4
121010
2
DPA43
131357
18
240
1ø
2
824925
6
3
12 0 0 0 7
2
#4
133300
2
121012
2
DPA63
131369
18
208
3ø
3 or 4
824914
6
3
12 0 0 0 6
3
#6
133200
4
121010
2
DEAJ
131361
18
208
1ø
2
824903
6
3
120006
2
#4
133300
2
121012
2
FEAJ
131375
15
380
3ø
3 or 4
824937
6
3
12 0 0 0 6
4
#10
13 3 0 0 0
6
121010
2
BEAJ
131352
15
240
1ø
2
824924
5
3
12 0 0 0 7
2
#6
133200
3
121010
1
DPA63
131369
15
208
1ø
2
824902
5
3
12 0 0 0 6
2
#4
133300
2
121012
1
DPA63
131369
Qty. Kw Part No. Qty Size Part No. Qty. Part No. P/N: 121011 Cat. No. Part No.
* Oven assemblies DO NOT include oven relay (contactor). This item must be ordered separately. When ordering Oven Assembly Complete,
specify 3 or 4 wire when applicable, as well as if dryer has Microprocessor or Non-Microprocessor controls.
N/A = Not available.
Electric Oven Component Application Chart
88 Currant Road / Fall River, MA 02720-4781
Kw
Additional Parts Available
Part No.
Description
112027
112040
112041
112533
112534
120100
120300
120400
120600
120802
120902
121014
121026
121499
121500
122804
121497
121507
182457
404500
404502
404506
404507
880200
“Water Washed Fabrics” Label
“Lint Compartment” Label
“Caution - Exhausted” Label
“Phase 5 Coin Program Location Summary” Label
“Phase 5 OPL Program Location Summary” Label
3/8” Straight (BX) Connector
3/8” x 45° (BX) Connector
3/8” Red Jacket (BX) Insulator
3/8” Greenfield (BX)
Red Butt Connector
#74B Wire Nut
1/4” Insulated (female) Terminal
Tab Receptacle Combination
5-1/2” Harness Tie
8” Harness Tie
Manometer (water column test gauge)
33” Heavy Duty Cable Tie
Snap Wire Tie Screw Mount
3/4” Jiffy Clip (BX) Retainer Clip
Almond Brush-In-Cap Bottle Touch-Up Paint
White Brush-In-Cap Bottle Touch-Up Paint
Almond “B” Brush-In-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint
Electrical Terminal (assortment) Kit
Telephone: (508) 678-9000
37
Fax: (508) 678-9447
ADC 450341
1 - 06/14/01-25
2 * 01/20/03-20