Download Siemens RUGGEDCOM RSG2200 User guide

Transcript
Chapter 5
RUGGEDCOM ROS
Setup and Configuration
User Guide
Figure 97: Mirrored Bits Table
3.
Select a serial port. The Mirrored Bits form appears.
1
2
3
4
5
6
7
8
Figure 98: Mirrored Bits Form
1. Port Box 2. Transport Box
8. Reload Button
4.
3. Loc Port Box
4. Rem Port Box
5. IP Address Box
6. Link Stats Options
7. Apply Button
Configure the following parameter(s) as required:
Parameter
Description
Port
Synopsis: 1 to 4
Default: 1
The port number as seen on the front plate silkscreen of the switch.
Transport
Synopsis: { TCP, UDP }
Default: UDP
The network transport used to transport Mirrored Bits protocol data over an IP network.
Loc Port
Synopsis: 1 to 65535
Default: 61001
The local IP port to use when listening for an incoming connection or UDP data.
Rem Port
Synopsis: 1 to 65535
Default: 61000
The remote TCP port to use when placing an outgoing connection.
IP Address
Synopsis: ###.###.###.### where ### ranges from 0 to 255 or { <EMPTY STRING> }
Default:
For an outgoing TCP connection (client) and UDP transport, this is the remote IP
address to communicate with.
142
Configuring the Mirrored Bits Protocol