Siemens simatic PCIL43 Operating instructions Download

Transcript
Expansions and configuration
10.3 Installing expansion cards
10.3.2
Installing an expansion module
Preparation
Isolate the device from mains
Installing expansion modules
Steps for installing an expansion module:
1
Open the device.
2
Remove the fastening screws (1) and
lift out the module bracket (2)
3
Remove the relevant steel slot cover
(3).
4
Insert the expansion module (4) into
the relevant slot.
5
Screw down the steel slot cover (3)
for the expansion module.
6
Insert the module bracket again.
7
Loosen free module bracket (5),
mount and screw down on the
expansion module
8
Close the device.
SIMATIC Rack PC IL 43
Operating Instructions, Edition 09/2005, A5E00432875-01
10-5