Download Orbiter External Installation Manual

Transcript
1.2
KEY INSTALLATION FEATURES
All the variations of the Orbiter Microsphere include features that make installation quick
and easy.
1.3
•
Auto sensing dual control; either coaxial video or RS422 twisted pair.
•
Minimum assembly required.
•
Plug and play mounting.
•
Integral video launch amplifier to allow cable runs up to 700 meters (2300 feet).
•
Alarm devices can be connected directly to the Orbiter Microsphere head.
•
Relay outputs available.
•
24V ac Input power
•
NVT Inside
UNPACKING AND PREASSEMBLY
Note: Before installing the pan and tilt camera assembly, the mount must be installed
including terminating all cabling.
WARNING: Always ensure the mounting surface and
installation hardware are capable of holding the
combined weight of the complete Orbiter Microsphere
and the mount.
CAUTION: Ensure all sealing gaskets are fitted properly
and that all cable entries are properly sealed.
CAUTION: The lower dome is fragile when not installed
and is susceptible to irreparable damage if dropped or
scratched on either the inside or outside surface of the
dome.
Rev 1.0
2
900.0733
30-Mar-06