Download OPERATING INSTRUCTIONS TRI[KA
Transcript
Overview_5 1.2 Introduction Photovoltaics are a fiercely competitive market. The primary focus of the end user is on the annual energy yield of their photovoltaic system. The TRI-KA characteristics analyser with the wireless TRI-SEN stands out due to its simple operation, its flexible mobility and its excellent price-performance ratio. It provides installers with a quality control system for documentation of their PV system data. The TRI-KA with the TRI-SEN is an intelligent measuring and documentation system that is indispensable for a professional installation and maintenance of a PV system. It facilitates the correct installation of a PV system and allows a comprehensive documentation of the system quality. The measuring system is based on the two portable measuring instruments TRI-KA and TRI-SEN. It can be used to carry out the following measurements and analyses: TRI-KA • Open-circuit voltage UOC • Short-circuit current ISC • I/U characteristic curve • MPP voltage UMPP • MPP power IMPP • MPP output PMPP • STC characteristic curve • STC values • Fill factor • Ideal characteristic curve of module manufacturer TRI-SEN • Global irradiation at module level • Cell temperature • Angle of inclination To convert the characteristic curves under standard test conditions, the measured data are wirelessly transferred from the TRI-SEN to the TRI-KA. This data transfer process enables a synchronous measurement of the characteristic curves and the solar irradiation irrespective of the location.