Download OPERATING INSTRUCTIONS TRI[KA

22_TRI-KA – Functions
Window 5 / 7 – TRI-SEN data
At this point, the module temperature can once again be measured with the TRI-SEN.
If no wireless connection can be established between TRI-KA and
TRI-SEN during measurement of the characteristic curve, the data
are temporarily stored in the TRI-SEN. After the measurement(s),
the data stored in the TRI-SEN must be synchronised with the
TRI-KA (chapter 10.1).
Window 6 / 7 – Save measurement
The measured data are saved on the inserted SD card. Once successfully saved, click on the tick symbol or the right arrow to open
the next window.
Window 7 / 7 – Display of the characteristic curve
The diagram shows the characteristic curve previously measured
and extrapolated to STC along with the ideal characteristic curve
of the manufacturer.
If no module was selected under the module data (window 2 / 7),
the ideal characteristic curve of the manufacturer is not shown. If
no TRI-SEN data could be stored, the measured characteristic
curve extrapolated to STC is not shown.
Click on the Home button to complete the measurement and return to the main menu.