Download Add-on for Microsoft

DHC-6 Twin Otter
Direct-To Page
Fig18.1
The Direct-To page is used to enter the Direct-To mode of navigation,
whereby the aircraft will start to track directly to the wpt selected on
this page. The Direct-To mode can be entered regardless of whether a
flight plan was previously active or not. Simply click on the DIRECT-TO
BUTTON, enter the identifier of the wpt you want to go to, and the
KLN 90B will navigate you there. There is a Direct-To feature for the
ENROUTE LEG and OBS modes. As discussed previously, the mode to
be used is chosen on the Mode pages. To use the Direct-To page:
1. Click on the DIRECT-TO BUTTON and the Direct-To page will
be displayed on the left screen (Fig18.1). A blinking rectangle
highlights the wpt identifier field.
2. Click the RIGHT INNER KNOB to the in position and click once
on the RIGHT INNER KNOB to activate data entry. A smaller,
blinking rectangle appears behind the first data field to be
changed at this time.
3. Use the RIGHT INNER and OUTER KNOBs, or your keyboard, to
enter the desired wpt identifier.
4. Click the ENTER BUTTON 3 times to enter the data and begin
tracking to the selected wpt. The Direct-To page will disappear
and the original page will again be displayed on the left screen.
The information on the FPL 0 page will change accordingly.
Aerosoft GmbH 2008
142