1
Download C70 Instruction Manual
Transcript
MITSUBISHI CNC Appendix 1 Registering and Editing Fixed Cycle Programs G76.1 2-part system simultaneous compound thread cutting cycle O761 THREAD-PATC-2SYS. G.1 N761!L10 #12=1 #13=#9 IF[ABS[#13]GE[ABS[#8]]]GOTO1 #16=1 #13=#8 N1#11=#13 IF[ABS[#11]LT[ABS[#4-#5]]]GOTO2 #11=#4-#5 #14=1 N2#17=#11 #18=ROUND[[#4-#11-#5]*#7] IF[[#18XOR#1]GE0]GOTO10 #18=-#18 N10#19=#18 #10=ROUND[[#11+#5]*#7] IF[[#10XOR#1]GE0]GOTO20 #10=-#10 N20G00X#10 #20=#10 DO1 #15=ROUND[#10*#3/#1] N90#40=90#41=#5001#42=#5002 G00Y#2+#3-#4-#15+#11 !L11 G33X#1-#10-#18Y-#3+#15M96.101P1000D3 G00Y-#2+#4-#11M97.101 !L12 IF[#14GT0]GOTO3 IF[#16GT0]GOTO7 #12=#12+1 #13=ROUND[#9*SQRT[#12]] IF[ABS[#13-#11]GE[ABS[#8]]]GOTO8 362 #16=1 N7#13=#11+#8 N8#11=#13 IF[ABS[#11]LT[ABS[#4-#5]]]GOTO9 #11=#4-#5 #14=1 N9#10=ROUND[[#17-#11]*#7] IF[[#10XOR#1]GE0]GOTO6 #10=-#10 N6#10=#10+#20 G00X-#1+#10+#18 IF[#14LT0]GOTO11 #18=0 GOTO12 N11#18=#19-#10+#20 N12END1 N3IF[ABS[#6]LT1]GOTO5 #14=0 #13=0 DO2 IF[#14GT0]GOTO5 #13=#13+#6 IF[ABS[#13]LT[ABS[#5]]]GOTO4 #13=#5 #14=1 N4G00X#10-#1 N91#40=91#41=#5001#42=#5002 G00Y#2+#3-#4+#13-#15+#11 !L11 G33X#1-#10Y-#3+#15M96.101P1000D3 G00Y-#2+#4-#13-#11M97.101 !L12 END2 N5G00X-#1 M99
