Download SES 4000 USER MANUAL

Transcript
Using Math Instructions
Subtract (SUB)
Use the SUB instruction to subtract one value (Source B) from another (source A)
and place the result in the destination. Source A and B can either be a word address
or constant.
SUB
SUBTRACT
Source A
Source B
Dest
Execution Times
(µsec) when:
True False
6.78
Updates to Arithmetic Status Bits
With this Bit:
S:0/0
Carry (C)
The Controller:
sets if borrow is generated; otherwise resets.
S:0/1
Overflow (V)
S:0/2
Zero (Z)
sets if underflow; otherwise reset. On underflow, the minor
error flag is also set. The value –32,768 or 32,767 is placed in
the destination. If S:2/14 (math overflow selection bit) is set,
then the unsigned, truncated overflow remains in the
destination.
sets if result is zero; otherwise resets.
S:0/3
Sign (S)
sets if result is negative; otherwise resets.
8–5
Programming
33.52