Download Foreword

WIN-9_F Series User Manual
Appendix 3 Digital Operator Monitor Display
LED
Name
Description
●●
Frequency reference can be monitored/set.
●●
Setting/display unit depends on display mode (P024).
●●
Output frequency is displayed.
●●
Display unit depends on display mode (P024).
Fref
Frequency Reference
Fout
Output Frequency
Iout
Output Current
Output is displayed in units of 0.1A (1A current for 1,000A and above).
kWout
Output Power
Output is in units of 0.1kW (1kW for 1,000kW powerand displayedabove).
F/R
FWD/REV Run Command
●●
FWD/REV run command can be monitored/set.
●●
Setting enabled during run command from digital operator.
●●
FWD run displays “For”, REV run displays “rEv”.
Accel
Acceleration Time 1
Acceleration time 1 (P019) can be set/read in units of 0.1 sec (1 sec for
1,000 sec and above).
Decel
Deceleration Time 1
Deceleration time 2 (P020) can be set/read in units of 0.1 sec (1 sec for
1,000 sec and above).
Vmtr
Motor Rated Voltage
Motor rated voltage (P011) can be set during stop.
V/F
V/f Pattern Selection
V/f pattern selection (P010) can be set during stop.
Fgain
Frequency Reference
Gain
Frequency reference gain (P046) can be set during stop.
Fbias
Frequency Reference
Bias
Frequency reference bias (P047) can be set during stop.
FLA
Motor Rated Current
Motor rated current (P032) can be set during stop.
PID
PID Selection
PID selection (P084) can be set during stop.
Energy Saving Selection
Energy saving selection (P095) can be set during stop.
kWsav
PRGM PRGM Mode
Parameters can be set/read during stop.
The following conditions can be monitored.
No.
Montr
Monitor
Contents
U-01
Frequency reference (same as Fref)
U-02
Output frequency (same as Fout)
U-03
Output current (same as Iout)
U-04
Output voltage reference is displayed in units of 1V.
U-05
DC voltage is displayed in units of 1V.
U-06
Output power (same as kWout)
●
86
●