Download USER`S MANUAL - Veterinary Technics

2.3 Get the Comm Port number for the UBS port
After installing the USB driver program, the Windows® operating system in the PC will
automatically assign a Comm Port number to the USB port. In order for the ECG receiver to
communicate with the PC, the Comm Port number needs to be input in the ECG program (see
page 32). To get the Comm Port number, follow these steps:
1.
Connect the ECG receiver to the USB port, and then click start button located at the lower
left corner of the screen.
2.
Click Control Panel as shown below.
3.
In Control Panel window, double click System icon as shown below.
4.
In System Properties window, click Hardware box as shown below.
5.
In the window below, click Device Manager box as shown below.
17