Download Renesas Flash Programmer V2.05 Flash memory programming

Renesas Flash Programmer V2.05
4.2.5
CHAPTER 2 FUNCTION DETAILS (BASIC MODE)
[Power Supply] dialog box
This dialog box is used to specify the power supply and other options used for writing to the target microcontroller.
Figure 2-9. [Power Supply] Dialog Box
(1)
(2)
(1) [Power supply from the emulator] area
This area is used to specify the power supply used for writing to the target microcontroller and the VDD value.
[Power target from the emulator] check box
Select this check box if supplying power from E1. Clear this check box if supplying power from the target
system.
[Supply voltage:] option button
When supplying power from the tool used, select a voltage of 3.3 V or 5.0 V (USB VBUS).
Caution
E1 and MINICUBE2 support the power supply function. In the mass-production process, do not
use the power supply function of E1 or MINICUBE2. Instead, supply the power suitable for the
microcontroller specifications from the target system.
The supply voltage from E1 and
MINICUBE2 is dependent on the USB power performance of the host PC, so the accuracy cannot
be guaranteed.
R20UT2907EJ0202 Rev. 2.02
Jul 01, 2015
Page 21 of 61