Download Chapter 12 SMON Management
Transcript
User Manual Volume II Quidview Device Manager z Standard ACL z Extended ACL z Layer-2 ACL Chapter 10 QoS Management Among them, every type of ACL can be further divided into numbered and named ACLs. So there are six types of ACLs in an Ethernet switch. Each type of ACL will be introduced in the following sections respectively. 10.3.1 Adding a Standard ACL Click the [Traffic Classification] tab in the [QoS management] dialog box as shown in Figure 10-1. Click <Add...> in the right column and see the [Type Selection Window] dialog box. In the combo box, select "standard ACL" and click <Next>. The [Add Standard ACL] dialog box will pop up, as shown in the following figure. Figure 10-5 Adding Standard ACL This dialog box allows you to create a standard ACL. The parameters are explained as follows: z ACL Type: Numbered and named ACLs; z ACL: Specify the ACL sequence number or name; For a numbered ACL, the parameter represents the ACL sequence number; for a named ACL, the parameter specifies an ACL name with a character string beginning with an English letter (i.e. [a-z, A-Z]) and excluding space and quotation marks. The ACL name is not case-sensitive. The all and any keywords cannot be used as a name. 10-7