Download Maintenance

02/02 Rev. 2.14-01
USER MANUAL
Maintenance, Page 10
TTX x50/67x – Wildcats/Wildcats plus – S 45/65/95/105 – TDI/STDI/XXtreme
Default setting: up against the internal black plastic bushing.
9. Attach the print head cable to the print head again.
10. After starting up again, the resistance of the print head must be entered via
the "SYSTEM PARAMETERS/Head resistance" parameter.
The print head can be damaged if an incorrect resistance is entered!
Read more about this under "Exchanging the print head" in the "Servicing
the print module" section of the Service Manual.