Download New System Installation

Connecting the Keyboard
Connecting Peripherals and Powering Up
4
Connecting the Keyboard
On the UCS 1000
A 6-pin, mini DIN receptacle is located on the rear of the system on the SBC rear I/O
transition card (Figure 34). A second receptacle is provided on the front of the SBC
circuit card. The male plug is provided with the keyboard. Both of the connector
assemblies are keyed to provide proper alignment.
See Appendix C, Pinouts (page 93) if you need pinout information.
Figure 34.
Mini DIN Pin Count
5 3 1
6 4 2
On the MAP/40P
A 6-pin, female DIN receptacle is located in the rear of the MAP/40P. The male plug
is provided with the keyboard. The connector assembly is keyed to provide proper
alignment. Figure 35 shows the receptacle and plug.
See Appendix C, Pinouts (page 93) if you need pinout information.
Figure 35.
Circular DIN 6-Pin Connector for the Keyboard
CONVERSANT System Version 8.0 New System Installation 585-313-149
Issue 3 December 2001 51