Download Technical Manual
Transcript
EN R14.13.M USER INSTRUCTIONS AND MAINTENANCE 3.3.5 Antifreeze function ............................................................................................ 32 3.3.6 Antifreeze function with support heaters (Option) .................................................. 33 3.3.7 No-flow protection .......................................................................................... 33 3.3.8 Regulation and control of the pump ..................................................................... 33 3.3.9 Fan(s) ON/OFF ............................................................................................... 34 3.3.10 Fan(s) speed control (Option)............................................................................. 34 3.3.11 Set point compensation (Option) ......................................................................... 35 3.3.12 Water filling kit (Option) ................................................................................... 35 3.3.13 Water strainer (Option) ..................................................................................... 36 3.3.15 Spurge valve (Option) ...................................................................................... 36 3.3.16 Double set point (Option) .................................................................................. 37 3.3.17 Phase sequence control (Option) ......................................................................... 37 3.3.18 Secondary pump control (Option) ....................................................................... 37 3.4 Operative settings of the controller .................................................................. 38 3.4.1 Menu structure.................................................................................................. 38 3.4.1 Parameters ....................................................................................................... 39 3.5 Trouble shooting .............................................................................................. 45 4. Maintenance ............................................................................................................... 48 4.1 Periodic clearing of the unit ............................................................................. 49 4.1.1 Periodic inspection and cleaning of the coils ........................................................... 49 4.1.2 Inspection and washing og the water exchanger ...................................................... 49 4.2 Compressor damage ......................................................................................... 49 4.2.1 Lubrication and removal of the oil ........................................................................ 50 4.3 Procedures in the event prolonged inactivity of installed units ........................ 50 4.3.1 Preliminary check (Pre Start-up) .......................................................................... 51 5. Warranty .................................................................................................................... 52 6. Scrapping/Disposal of the unit at the end of its working life .................................... 53 6.1 Disposal of fluids .............................................................................................. 53 6.1.1 Emptying of refrigerant ...................................................................................... 53 6.1.2 Compressor lubricating oil .................................................................................. 53 6.2 Scrapping of the unit ......................................................................................... 54 APPENDIX I / R410a Technical data sheet ................................................................... 55 8