1
Download User Manual Basic Configuration
Transcript
Traffic control 8.3 Rate Limiter 8.3 Rate Limiter 8.3.1 Description Rate Limiter To guarantee reliable data exchange during high traffic, the Switch can limit traffic. Entering a limit rate for each port determines the amount of traffic the switch is permitted to transmit and receive. If the data load transmitted on this port exeeds the maximum load, the Switch will discard the excessive data on this port. A global setting activates/deactivates the rate limiter function at all ports. 8.3.2 Setting Rate Limiter for RS20/RS30/40, MS20/30, MACH 1000 V Select the Switching:Rate Limiter dialog. With “Ingress Limiter” you can enable or disable the input limiting function for all ports. With “Egress Limiter (p/s)” you can enable or disable the broadcast output limit on all ports. With “Egress Limiter (kbit/s)” you can enable or disable the output limit for all packet types on all ports. 116 Basic - L2E Release 3.1 06/07
