Download User Manual Basic Configuration

Operation Diagnostics
Name
Chassis
Redundancy
Port Security
Bridge
9.1 Sending traps
Bedeutung
encompasses the following events:
– Power Supply: The status of a supply voltage has changed (see the
System dialog).
– Signaling Relay: The status of the signal contact has changed.
To cosider this event enable “generate Trap” in the Diagno
stics:Signal Contact 1/2 Dialog.
– An error has occurred in connection with the SNTP.
– A media module has been added or removed.
– The AutoConfiguration Adapter, ACA, has been inserted or removed.
– The value exceeded / fell below the temperature threshold.
The status of the HIPER-Ring or the redundant coupling of HIPER-Rings
/ network segments has changed.
On one port a data packet has been received from an unauthorized
terminal device (see Port Security Dialog).
Although the BPDU guard function is activited at a port a BPDU was
received (see User Manual Redundancy under „Rapid Spanning Tree“).
Table 11: Trap categories
146
Basic - L2E
Release 3.1 06/07