Download Cirrus Pro Installation
Transcript
Time Zones When using Time Zones, each zone has its own set of gain and threshold values for each pipe. Each day is split into three time zones, the current zone is indicated by ‘>>’ when the menu is entered. The start times for the three zones each day are entered with the required gain and sensitivity levels for that zone. The >> indication is now used to show which time zone is being edited. The copy button copies the times and sensitivity levels to the following day. Latch Levels Each pipe can be set up to latch at any one of the alarm levels. This means that once the selected level has been reached it requires manual intervention to reset the unit. The default is ‘Latch at pre-alarm’. Any levels attained above the ‘latch level’ will be retained until reset. 3.2.12 I/O Settings 93-520-20 Issue 3.3 Page 23 of 60 CirrusPro Engineer’s Manual